ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

nikhsub1 · 18 July 2007, 01:48 PM

Man these no hole cases make the bands a pain to remove... what are you all using to safely and carefully remove your bands? Something from Bergeon? Exact part #'s would be much appreciated!!!

nikhsub1 · 18 July 2007, 04:42 PM

Bump before bed. Anyone?

leopardprey · 18 July 2007, 04:52 PM

I usually use the small screwdiver that is attached to the corkscrew on my Swiss Army Knife (Champion Model). Then after one side is puched in, I insert a toothpick to keep it puched in, and then pop off the other side - which then the whole bracelet comes off.

Should get a Proper Tool to do. Would be much faster. I do know that for Rolex you need to get a tool with small end fork, as many of the tools have larger size forks made for other watch brands that have larger pin openings.

Jocke · 18 July 2007, 04:57 PM

Just check out my posts in this thread.

http://www.rolexforums.com/showthread.php?t=19513

I hope it helps.

Jocke

Gedanken · 18 July 2007, 05:07 PM

Ah, bugger that wussy tiptoe-through-the-tulip stuff - here's what you need:

Tools · 19 July 2007, 12:22 AM

Quote:

Originally Posted by Gedanken

Ah, bugger that wussy tiptoe-through-the-tulip stuff - here's what you need:

I find this one better suited for removal of the bracelet:

Jocke · 19 July 2007, 01:14 AM

Quote:

Originally Posted by Tools

I find this one better suited for removal of the bracelet:

That one dosen´t work, it´s a SnapOn.

Jocke

Alex Stylianou · 19 July 2007, 03:56 AM

Lug Tool.

Jocke · 19 July 2007, 04:00 AM

Quote:

Originally Posted by Alex Stylianou

Lug Tool.

Or what about a leg tool?

Jocke

Tools · 19 July 2007, 04:15 AM

Quote:

Originally Posted by Jocke

Or what about a leg tool?

Jocke

Now...THAT's what I call a Tool watch..

Lubrifar · 19 July 2007, 06:08 AM

Quote:

Originally Posted by Tools

Now...THAT's what I call a Tool watch..

OysterOpener...

Robb · 19 July 2007, 06:13 AM

Welshwatchman · 19 July 2007, 06:16 AM

Quote:

Originally Posted by Jocke

Or what about a leg tool?

Jocke

Sir Paul McCartney used that technique a couple of years ago and got a bit of a shock.

A VERY bad investment also.

Jocke · 19 July 2007, 06:21 AM

Quote:

Originally Posted by Welshwatchman

Sir Paul McCartney used that technique a couple of years ago and got a bit of a shock.

A VERY bad investment also.

Yes but he can afford it.

Jocke

nikhsub1 · 19 July 2007, 04:18 AM

She looks like she lost her legs below the knees in the 'open' shot.

Tools · 19 July 2007, 04:20 AM

Quote:

Originally Posted by nikhsub1

She looks like she lost her legs below the knees in the 'open' shot.

It's like an extra bezel...You don't really need that part very often..

nikhsub1 · 19 July 2007, 04:23 AM

Quote:

Originally Posted by Tools

It's like an extra bezel...You don't really need that part very often..

18 July 2007, 01:48 PM	#1
nikhsub1 Server Advisor Join Date: Oct 2006 Location: LA & NY Watch: 16610LV Posts: 1,118	Tool used to remove bracelet? Man these no hole cases make the bands a pain to remove... what are you all using to safely and carefully remove your bands? Something from Bergeon? Exact part #'s would be much appreciated!!!

18 July 2007, 05:07 PM	#5
Gedanken "TRF" Member Join Date: May 2005 Real Name: Sir Location: Melbourne Watch: F-series SD Posts: 8,589	Ah, bugger that wussy tiptoe-through-the-tulip stuff - here's what you need: __________________ You buy a Casio to make sure you're on time; you wear a Rolex because you don't have to be on time.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

18 July 2007, 04:42 PM	#2
nikhsub1 Server Advisor Join Date: Oct 2006 Location: LA & NY Watch: 16610LV Posts: 1,118	Bump before bed. Anyone?

18 July 2007, 04:52 PM	#3
leopardprey Banned Join Date: Nov 2006 Real Name: Chad Location: Around the world Watch: Panerai 233 Posts: 4,204	I usually use the small screwdiver that is attached to the corkscrew on my Swiss Army Knife (Champion Model). Then after one side is puched in, I insert a toothpick to keep it puched in, and then pop off the other side - which then the whole bracelet comes off. Should get a Proper Tool to do. Would be much faster. I do know that for Rolex you need to get a tool with small end fork, as many of the tools have larger size forks made for other watch brands that have larger pin openings.

18 July 2007, 04:57 PM	#4
Jocke 2024 SubLV41 Pledge Member Join Date: Apr 2006 Real Name: Jocke Location: Sweden Watch: A dozen of Rolex's Posts: 22,541	Just check out my posts in this thread. http://www.rolexforums.com/showthread.php?t=19513 I hope it helps. Jocke

19 July 2007, 03:56 AM	#8
Alex Stylianou "TRF" Member Join Date: Jan 2007 Location: UK Posts: 1,785	Lug Tool.

19 July 2007, 06:13 AM	#12
Robb 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Jun 2007 Real Name: Robb Location: USA Watch: BLNR Posts: 4,939

19 July 2007, 04:18 AM	#15
nikhsub1 Server Advisor Join Date: Oct 2006 Location: LA & NY Watch: 16610LV Posts: 1,118	She looks like she lost her legs below the knees in the 'open' shot.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)