Rick-O Does anyone have a pic of... 9 January 2012, 06:33 AM
matt4hand They are sealed from the rear... 9 January 2012, 07:17 AM
Keeperoftime That is a beauty Matt! 10 January 2012, 12:00 AM
matt4hand Thanks J-Man! 10 January 2012, 06:48 AM
T5AUS Interesting 10 January 2012, 07:26 AM
Rick-O Yes, exactly! I'm just... 10 January 2012, 11:10 AM
SubKing Matt,
Im sorry to say that... 18 January 2012, 03:30 PM
ArcticMoose Thanks for the photos and... 18 January 2012, 03:47 PM
T5AUS I have to say Sub King, the... 19 January 2012, 12:34 PM
SubKing Hi there.
Your hands that... 20 January 2012, 06:37 AM
larryccf i'll try to find the photo... 5 February 2012, 03:22 AM
Jagatai Cool! Thanks for the pics matt 9 January 2012, 08:41 AM
Jason71 Matt is right. I have had a... 9 January 2012, 10:41 AM
Rick-O Many Thanks fellas!! That's... 9 January 2012, 11:19 AM
apan My 5513 with sealed hands... 9 January 2012, 12:42 PM
ArcticMoose For undisclosed reasons I... 18 January 2012, 01:40 PM
SubKing here are another 2 pics of... 20 January 2012, 06:59 AM
sailmed Also, check recent thread... 20 January 2012, 07:32 AM
T5AUS I took a look and as you say... 20 January 2012, 04:21 PM
SubKing for those of you who do not... 20 January 2012, 08:59 AM
Robbyvm I agree with diamondjack...... 20 January 2012, 09:06 AM
Saxon007 Here is a photo of my Tudor... 20 January 2012, 10:19 AM
SMC84 Here's my 16800 Bob R sealed... 20 January 2012, 10:39 AM
SubKing you guys... my watch is from... 20 January 2012, 11:37 AM
cruvon was 1955 radium or tritium?... 20 January 2012, 11:51 AM
SubKing Hi,
my watch has a 1960... 20 January 2012, 01:34 PM
cruvon Thanks for the detailed... 20 January 2012, 02:05 PM
Cannop Very interesting read... 20 January 2012, 02:49 PM
Cannop I did my Tudor sub myself,... 20 January 2012, 01:07 PM
GeoGio Greece I just checked the thread.... 4 February 2012, 07:58 AM
SubKing here is a pic of the epoxy... 20 January 2012, 01:53 PM
SubKing I was talking to Ken aka... 21 January 2012, 05:34 AM
bobbipiazza Bob Ridley on sealing a dial 4 February 2012, 07:47 AM
|
9 January 2012, 06:33 AM | #1 |
"TRF" Member
Join Date: Mar 2011
Real Name: Rick
Location: Insane
Watch: Anything Tropical
Posts: 170
|
Does anyone have a pic of Sealed hands done by Mr. Ridley?
Please, I would like to see a pic or hear your experience
|
9 January 2012, 07:17 AM | #2 |
Banned
Join Date: Jan 2011
Real Name: Matt
Location: Atlanta
Watch: Tramp
Posts: 2,369
|
They are sealed from the rear so they don't look any different than other hands.
My 5508 had the hands sealed on them. Here is a pic. |
10 January 2012, 12:00 AM | #3 |
"TRF" Member
Join Date: Apr 2009
Real Name: Jeremy
Location: Louisiana
Watch: Rolex
Posts: 2,732
|
That is a beauty Matt!
__________________
As a man is, so he sees. As the eye is formed, such are its powers. William Blake |
10 January 2012, 06:48 AM | #4 |
Banned
Join Date: Jan 2011
Real Name: Matt
Location: Atlanta
Watch: Tramp
Posts: 2,369
|
|
10 January 2012, 07:26 AM | #5 |
Banned
Join Date: Mar 2007
Location: USA
Watch: ing the time go by
Posts: 1,444
|
Interesting
When you say sealed, do you mean that the original lume is sealed "from the back" with a varnish or glue to stabilise it, just curious, thanks
|
10 January 2012, 11:10 AM | #6 |
"TRF" Member
Join Date: Mar 2011
Real Name: Rick
Location: Insane
Watch: Anything Tropical
Posts: 170
|
|
18 January 2012, 03:30 PM | #7 | |
"TRF" Member
Join Date: Feb 2008
Location: USA
Watch: where do i start??
Posts: 3,254
|
Quote:
Im sorry to say that your hands are not stabilized.. the fingers you see in the pictures you posted above are mine! i used to own this watch and as stated in another thread, i serviced the watch when I owned it. i serviced this watch 8 months back or so before I sold it. I can tell you 100% that the hands are not stabilized. so if you're interested, you may want to look into getting the hands done. just for the record for everyone to know, every watch is different. depending on the condition and shade/color of the tritium on your vintage, some hands will darken a bit and some will not.. all depends on the age and color. I just posted this all in a thread I made about stabilizing my hands on my 6536-1 here are the pics from my other thread. and her are what the back of the hands look like when they have been sealed. no varnish used... accrylic or appoxy only... appoxy is stronger than accrylic and less wet when applying to the serface. My hands were very yellow before so they did darken a touch as apposed to if they were more cream in color they wouldn't have darkened as much.. better to have a peace of mind than to one day have tritium start to flake off.. Once you see cracking, it's not good and will only get worse. Also, there is alot of risk involved when servicing your vintage watch that has cracking old tritium... anything could happen when the hands are being removed or re installed no matter how good the watch maker. the tritium on the hands is like a layer of dust as thin as a sheet of paper. from the hands constantly under stress i.e. moving when setting the time or the second hand ticking, doesn't help the tritium either. so if you see cracking under a 10x loop then you may want to consider getting the hands done before its too late and this goes for anyone with a vintage. it is all done from the back so you will see nothing. If you are as picky as I am and will be inspecting the job with a loop after the service, then make sure you send it to someone who is well known because you don't want to get your vintage back with scratches and glue all over the front of the hands.. you want them to look perfect. Like my watch, not one tell or one mark that wasn't already there before i did the service. use a watch maker who is as particular and detailed as you are if you want the right results. |
|
18 January 2012, 03:47 PM | #8 | |
"TRF" Member
Join Date: Oct 2009
Location: The Sea
Posts: 1,894
|
Quote:
Do you have any experience with hands that already have visible damage, such as the ones in the attached photo? |
|
19 January 2012, 12:34 PM | #9 |
Banned
Join Date: Mar 2007
Location: USA
Watch: ing the time go by
Posts: 1,444
|
I have to say Sub King, the result on those hands are worrying, the thickness of that epoxy on the back surely is too much (this is going on your not so clear macro photo, so apologies if I missed something) will this not effect the weight and so the motion, ie speed wise or perhaps catch the dial or other hand, just that it looks like it sticks out quite a bit from original ? Also, are the treated ones not a little darker. This is just the way I see it and I admire you for tackling such a task, do you have some clearer photo's, thanks
|
20 January 2012, 06:32 AM | #10 | |
"TRF" Member
Join Date: Feb 2008
Location: USA
Watch: where do i start??
Posts: 3,254
|
Quote:
I know its hard to tell from the pictures and this photo was taken while the epoxy was still wet.. First, This is a very important point you bring up.. If the epoxy was too thick of a coat, the hands would not clear eachother when re installed and would cause the hands to jam when passing over eachother... The weight is not an issue because the hands are clamped so secure onto the main hub, the hands can hold 10 times their weight and still function normally. I should have posted a picture of the hands once dried.. The coat of epoxy is so thin on the back of the hands you wouldn't even think it would help... The point is most of the epoxy gets absorbed into the tritium which reinforces the tritium all together and what remaines is a super hard tritium that also has a 1 micron layer of epoxy on the bottom... this was all explained on the thread i made 2 weeks ago about stabilizing my hands... a simple search and you can read more about it. Also to note, just not any epoxy will do. there are so many out there and only 1 kind is best for this job... The way I do it is the same way bob R does it.. Only he uses an accrylic that he brushes on in most cases. i don't like using accrylic because its hard to work with and more messy.. You cannot use a spray varnish on the back of the hands because the force of the spray can will blow the hands all over the place.. if you use a brush on varnish, it will dry too thick... |
|
20 January 2012, 06:37 AM | #11 | |
"TRF" Member
Join Date: Feb 2008
Location: USA
Watch: where do i start??
Posts: 3,254
|
Quote:
Your hands that you posted a picture of is the exact result of what can and will eventually happen to everyone who has a vintage watch.. you cannot excape it.. once the hands get like that, there are only 2 options.. 1 option is to strip the hands and relume them and try to match the color to the dial as much as possible. the 2nd option is (which I would do) is to stabilize the hands so they don't get any worse than they already are.. they will not look better after the service, they will look the same and they will never get any worse than they are now which will help preserve the value and condition of your vintage. |
|
5 February 2012, 03:22 AM | #12 | |
"TRF" Member
Join Date: Aug 2009
Location: richmond, va
Posts: 541
|
Quote:
i'll try to find the photo and post, but Jack at IWW sealed mine -they were in similiar already cracked condition, and part of the tritium fell out - about 25% of the center of the minute hands tritium left for parts unknown - it was likely already fragile and contact from the brush or maybe even the weight of the sealant he used was the straw that broke the camel's back. I don't fault Jack, as he warned me and indicated he was only suggesting it as they were fragile ( the hands were first born about the time Moses was still in shorts), and this was purely an attempt to stabilize them for a bit longer. I think the sealant is a great idea for preserving good condition hands, but there's a risk on fragile hands found the shot - and there was a "crack" in the tritium at one end of the now cavity |
|
9 January 2012, 08:41 AM | #13 |
"TRF" Member
Join Date: Dec 2010
Real Name: Philip
Location: NY
Posts: 851
|
Cool! Thanks for the pics matt
|
9 January 2012, 10:41 AM | #14 |
"TRF" Member
Join Date: Mar 2009
Real Name: Jason
Location: USA
Watch: Rolex/Tudor Divers
Posts: 7,973
|
Matt is right. I have had a couple sets of hands sealed and made secure by Bob Ridley, and they are done from the back of the hand. The user cannot tell the difference.
__________________
Best Regards, Jason Just Say "NO" to Polishing Card-Carrying Member of the Global Association of Retro-Grouch Curmudgeons LIfe is too short to wear inexpensive watches PLEXI IS SEXY |
9 January 2012, 11:19 AM | #15 | ||
"TRF" Member
Join Date: Mar 2011
Real Name: Rick
Location: Insane
Watch: Anything Tropical
Posts: 170
|
Quote:
Quote:
Many Thanks fellas!! That's exactly what I was hoping to hear |
||
9 January 2012, 12:42 PM | #16 |
"TRF" Member
Join Date: Jul 2011
Location: Los Angeles
Posts: 170
|
My 5513 with sealed hands should be returning from Bob Ridley shortly. I will post pics when I get it!
|
18 January 2012, 01:40 PM | #17 |
"TRF" Member
Join Date: Oct 2009
Location: The Sea
Posts: 1,894
|
For undisclosed reasons I will be following this thread with great interest.
Anyone have photos of the bottom side of treated hands? |
20 January 2012, 06:59 AM | #18 |
"TRF" Member
Join Date: Feb 2008
Location: USA
Watch: where do i start??
Posts: 3,254
|
here are another 2 pics of the finished result.
|
20 January 2012, 07:32 AM | #19 |
"TRF" Member
Join Date: May 2008
Real Name: Barry
Location: Newtown Square
Watch: Red Sub, 5513, FF
Posts: 299
|
Also, check recent thread "Just Back from Spa Ridley"
I sent my 1680 Red Sub and just got it back. The hands are sealed, and I have included (lower in the thread) pictures of before and after. There is no perceptible difference to my eye pre and post sealing
__________________
"Primum non nocere." |
20 January 2012, 04:21 PM | #20 |
Banned
Join Date: Mar 2007
Location: USA
Watch: ing the time go by
Posts: 1,444
|
I took a look and as you say sailman, they both look identical, a great result.
|
20 January 2012, 08:59 AM | #21 | |
"TRF" Member
Join Date: Feb 2008
Location: USA
Watch: where do i start??
Posts: 3,254
|
Quote:
for those of you who do not want to take my word.. I'm sure you would say SteelerFan65 or for those of you who know him "Ken" has much knowledge on vintage.. aside from him owning several amazing vintage watches. please see in this thread on the link below what he has to say about stabilized hands. 6 posts down from the top is where you will see his post. http://www.rolexforums.com/showthread.php?p=2465213 Some watch makers use super glue or nail polish to stabilize hands... there is no right way or wrong way, what ever the person doing the repair prefers using...... I don't like to use accrylic because its hard to work with and the chemical you have to mix with the accrylic powder is very strong and i'm worried it could eat through the tritium in most cases. I'm sure accrylic is not the only thing that bob uses. |
|
20 January 2012, 09:06 AM | #22 |
"TRF" Member
Join Date: Jan 2012
Location: Belgium
Posts: 2,239
|
I agree with diamondjack... The difference in colour between hands and markers is enormous, if this is realy due to the fixation process ??
|
20 January 2012, 10:19 AM | #23 |
"TRF" Member
Join Date: Nov 2008
Location: Texas
Posts: 2,002
|
Here is a photo of my Tudor sub on which Mr. Ridley sealed the hands. There is no color difference, they look the same as before. He also replaced the pearl (which was missing). I give him an A+ for his work.
__________________
Licensed to kill time. |
20 January 2012, 10:39 AM | #24 |
2024 SubLV41 Pledge Member
Join Date: May 2010
Location: USA
Watch: Rolex & IWC
Posts: 208
|
Here's my 16800 Bob R sealed the hands on. I didn't notice any significant darkening of the hands?
|
20 January 2012, 11:37 AM | #25 |
"TRF" Member
Join Date: Feb 2008
Location: USA
Watch: where do i start??
Posts: 3,254
|
you guys... my watch is from 1955 which is much older than the examples you all are showing me... also my tritium was very yellow before it was even stabilized...
you are comparing apples to oranges.. the epoxy I use is clear. the only reason the tritium darkened is because of its age and current yellow/orangish color... Ken, if you're reading this, I would love some back up. |
20 January 2012, 11:51 AM | #26 | |
"TRF" Member
Join Date: Apr 2011
Location: Australia
Posts: 4,689
|
Quote:
__________________
Last thing I remember, I was Running outta sight I had to find the passage back,To the place I was before. ’Relax,’ said this Rolex place,We are programmed to receive. You can checkout any time you like, But you can never leave! |
|
20 January 2012, 01:34 PM | #27 | |
"TRF" Member
Join Date: Feb 2008
Location: USA
Watch: where do i start??
Posts: 3,254
|
Quote:
my watch has a 1960 service dial with tritium. the hands before this was done were very yellow/orange in color. this will most deff make a HUGE difference in the color when sealing the hands... When doing a watch that has little to no patina on the tritium, you're not going to notice much of a color change IN MOST CASES. same goes for cream patina. this is part you should read cannop.. to get into it with lacquer... Lacquer is a hard substance, but in reality if exposed to water, can harm the lacquer over time as epoxy wouldn't make a difference wet or dry, it's very stable and very very hard.. two different animals completely.. It HAS BEEN SAID, that over time, depending on what you're coating, thin coats of lacquer can get stress cracks, from sun light exposure to weather conditions, it can also yellow in color as well etc... epoxy resin is more like a plastic once it hardens, unlike lacquer is more of a paint oil based substance.. To give you a better example.. If I have two sets of metal hands and I pour a very powerful paint thinner over each set of hands, the epoxy is going to survive the acetone substance and the oil based lacquer is not going to survive... Because epoxy is a resin, not an oil base. There are also many other various reasons why i will not use lacquer aside from what i have said above.... the tritium on my hands was such a thin coat, i could literally see a shadow right through it.. they would also get very light when I would hold my hands up to the light and they would get much darker when I put the hands on a white sheet of paper... So even tho the epoxy was clear, it still added a thin layer of material to the bottom which causes less light to pass through them which can make them look darker in a way.. Also, as stated before, tritium is like dry dust powder, no matter how thick the agent you apply, it is still going to absorb like a sponge what ever agent you're applying to the tritium.. some newer tritium hands with no patina or cream patina still retain some of the natural surface agents that at one time made it strong and not so brittle so when applying a sealant, it will repel and not absorb unlike my hands that are so old and so aged and have so much patina, there is nothing left to protect the tritium, the tritium has turned into a dried out dirty dust thats going to absorb anything you apply to it... epoxy is a thick gel like substance, if anything else was used, like lacqure for instance, it is much thinner of an agent and it would have absorbed way worse.. I cannot explain these facts any better than i just have... I give up at this point if no one can understand any of this info... This all goes with saying, depending on the vintage, some hands darken and some don't. ughhh |
|
20 January 2012, 02:05 PM | #28 | |
"TRF" Member
Join Date: Apr 2011
Location: Australia
Posts: 4,689
|
Quote:
Thanks for the detailed technical explanation. Also you said the dial was a service replacement, were the hands service replacements too because if the hands were from 1955 could that have been radium? I ask because radium might react differently to say if tritium was sealed using the sealant used.
__________________
Last thing I remember, I was Running outta sight I had to find the passage back,To the place I was before. ’Relax,’ said this Rolex place,We are programmed to receive. You can checkout any time you like, But you can never leave! |
|
20 January 2012, 02:22 PM | #29 | |
"TRF" Member
Join Date: Feb 2008
Location: USA
Watch: where do i start??
Posts: 3,254
|
Quote:
the dial and hands are both service replacements. If I send the dial to Bob to have the dial sealed, the markers will darken just like the hands, but maybe not as much as the dial tritium plots are much thicker than the hands, so they may react different. you never really know.. Which is why one of the first things bob will tell you when asking him to stabilize, he will say "there is a chance your hands will darken a bit." he is being upfront and honest in the chance that it does... But in most cases it doesn't.. So even Bob doesn't know most of the time until it's done. |
|
20 January 2012, 02:49 PM | #30 |
"TRF" Member
Join Date: Nov 2010
Real Name: Duncan
Location: UK
Watch: Lots
Posts: 443
|
Very interesting read SubKing, thank you. I wasn't sure what to use when i did mine, I thought there would probably be something on the market that could do the job better than laquer. In the end I used a sample that my watchmaker sent me, he has been using it for over 20 years on his customers watches and hasn't had one back yet so I thought that'll do for me!
__________________
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - "The quality is remembered long after the price is forgotten" - Sir Henry Royce (1863 -1933) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.
ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX