ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

diver2012 · 19 February 2013, 10:05 PM

My sister has a 5 year old Oyster which my Mum gave her.

I saw her the other day and noticed her crown was not screwed in properly - so told her she needs to be careful with it and that if water gets in it will cost a small fortune to repair.

I also changed the time for her as it was a bit fast and she normally gets my Dad to do it.

Once I changed it I thought I would give it a wind...the crown would not rotate clockwise at all. I made sure it was in the winding position and tried giving it a little wiggle but no matter what I did it would not wind.

Will it physically not let you if it is already fully wound? Or does it sound like their might be a problem?

It is the first time I have touched the watch and have only ever used a Submariner before.

diver2012 · 20 February 2013, 08:51 AM

Anyone?

The GMT Master · 20 February 2013, 08:54 AM

That doesn't sound right at all. Rolex automatic movements use a slipping clutch mechanism, so you can essentially keep winding the mainspring when it is fully charged without doing any damage. If the crown has been left unscrewed often, there could be something more serious. If it's 5 years old, it is due a service anyway, get it sent off to the RSC at Kings Hill, and they'll have it back looking and performing like brand new again

All the best,

Chris

mrbill2mrbill2 · 20 February 2013, 09:30 AM

Definitely time for a service, or at least a look at by a watchmaker.

19 February 2013, 10:05 PM	#1
diver2012 "TRF" Member Join Date: Feb 2013 Location: N/A Watch: N/A Posts: 1,373	Rolex Ladies Oyster Perpetual Question My sister has a 5 year old Oyster which my Mum gave her. I saw her the other day and noticed her crown was not screwed in properly - so told her she needs to be careful with it and that if water gets in it will cost a small fortune to repair. I also changed the time for her as it was a bit fast and she normally gets my Dad to do it. Once I changed it I thought I would give it a wind...the crown would not rotate clockwise at all. I made sure it was in the winding position and tried giving it a little wiggle but no matter what I did it would not wind. Will it physically not let you if it is already fully wound? Or does it sound like their might be a problem? It is the first time I have touched the watch and have only ever used a Submariner before.

20 February 2013, 09:30 AM	#4
mrbill2mrbill2 "TRF" Member Join Date: Nov 2010 Real Name: Mr. Bill Location: South Florida Watch: 16610 Posts: 6,148	Definitely time for a service, or at least a look at by a watchmaker. __________________ Card Carrying Member of the Global Association of the Retro-Grouch-Curmudgeons - ID # 13

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

20 February 2013, 08:51 AM	#2
diver2012 "TRF" Member Join Date: Feb 2013 Location: N/A Watch: N/A Posts: 1,373	Anyone?

20 February 2013, 08:54 AM	#3
The GMT Master "TRF" Member Join Date: Jul 2008 Real Name: Chris Location: England Posts: 8,150	That doesn't sound right at all. Rolex automatic movements use a slipping clutch mechanism, so you can essentially keep winding the mainspring when it is fully charged without doing any damage. If the crown has been left unscrewed often, there could be something more serious. If it's 5 years old, it is due a service anyway, get it sent off to the RSC at Kings Hill, and they'll have it back looking and performing like brand new again All the best, Chris

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)