ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
|
4 June 2013, 03:47 AM | #1 |
"TRF" Member
Join Date: Jan 2009
Location: UK
Watch: Seamaster
Posts: 181
|
Scratched Ceramic Bezel
I have had my GMT2C for about 3 months now and when I was cleaning it yesterday I noticed quite a deep scratch between the 12 and the 14 on the bezel.
I always thought that ceramic bezels were highly scratch resistant. Has any one else had this problem? Thanks |
4 June 2013, 03:50 AM | #2 |
"TRF" Member
Join Date: Feb 2011
Location: US
Watch: Sub
Posts: 3,175
|
Do you have a pic?
I've seen some folks around here actually scratch the bezel insert...so it can happen, unfortunately. More often than not the "scratch" is actually just a mark/residue from something that banged against the bezel. Some elbow grease may be able to remove it. Good luck.
__________________
侘 寂 -- wabi-sabi -- acceptance of transience and imperfection by finding beauty in that which is imperfect, impermanent, and incomplete Commissioner of WEIRD POLICE , Badge # ecsub44 |
4 June 2013, 03:52 AM | #3 |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 53,064
|
Yes there have a few reported problems with the ceramic inserts getting scratched,if its deep like you state its going to be very expensive to replace.
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder |
4 June 2013, 04:03 AM | #4 |
"TRF" Member
Join Date: Mar 2010
Real Name: MJC
Location: PHL USA
Watch: IWC, Rolex, AP
Posts: 29,232
|
They're highly resistant to scratches, but they've been known to happen. One of our members scratched this subc in a motorcycle wreck and used a Dremel to get the scratch off. I'll look for the thread...
__________________
|
4 June 2013, 04:03 AM | #5 |
"TRF" Member
Join Date: Jan 2013
Location: Here!
Watch: Rolex
Posts: 4,366
|
Deep scratch does not sound good on the new ceramic bezels and as Peter stated....quite expensive to replace....I have heard of issues like this with others as well.
__________________
16610LN | 16613LB | 16710 Pepsi | 118238 | 116500 (White) | 116500 (Black) | 116710BLNR | 116610LV "The one thing I fear most is time; time waits for no one and leaves no options."
|
4 June 2013, 04:05 AM | #6 |
"TRF" Member
Join Date: Mar 2010
Real Name: MJC
Location: PHL USA
Watch: IWC, Rolex, AP
Posts: 29,232
|
__________________
|
4 June 2013, 04:09 AM | #7 |
2024 SubLV41 Pledge Member
Join Date: Jul 2009
Location: Cave
Watch: Sundial
Posts: 33,940
|
Diamonds ARE NOT a man's best friend.
|
4 June 2013, 04:33 AM | #8 |
"TRF" Member
Join Date: Jan 2009
Location: UK
Watch: Seamaster
Posts: 181
|
I realise that it won't be a cheap fix. A local rolex accredited watch repairer is costing it up for me. Don't think I can live with it...........although I'm still in shock.
To be honest I can't remember banging it that hard |
9 June 2013, 06:05 AM | #9 |
"TRF" Member
Join Date: Feb 2013
Real Name: Louis
Location: Bay Area, CA
Watch: PP 5131R
Posts: 5,196
|
|
4 June 2013, 04:42 AM | #10 |
"TRF" Member
Join Date: Jun 2013
Real Name: Hector
Location: Lake Placid, NY
Watch: Rolex Day-Date
Posts: 390
|
Big differences between a ding and a scratch. I can live with a scratch, a ding? Nope. Good luck buddy!
|
4 June 2013, 05:08 AM | #11 |
Banned
Join Date: Aug 2006
Location: usa
Posts: 1,601
|
pic?
|
9 June 2013, 02:27 AM | #12 |
"TRF" Member
Join Date: Jan 2009
Location: UK
Watch: Seamaster
Posts: 181
|
Have been quoted just over £400 to replace the bezel insert. A lot of money..........but it could be worse.
Sorry for the lack of a photo but I'm no good at photography. However, it is a scratch and I'm now deciding whether it is worth replacing the bezel. Obviously the watch functions as normal and any remedial work would be purely cosmetic. Decisions, decisions......... |
9 June 2013, 03:09 AM | #13 | |
"TRF" Member
Join Date: Apr 2012
Location: UK
Posts: 2,205
|
Quote:
If it's a slight scratch and you are fairly near having a service then it might be worth waiting. I lost the pearl out of my Deepsea bezel and it was slightly more than the cost you have been quoted for the GMT, two years ago. Every time I put the watch on my eye focused on the missing pearl to the point of obsession. After two weeks I had the bezel replaced. If it is slight blemish and you can live with it, I'd leave it a while or until service. If it spoils your enjoyment of the watch, it won't take you long to decide it has to be replaced. |
|
9 June 2013, 02:47 AM | #14 |
Banned
Join Date: Feb 2013
Real Name: Jon
Location: Kitchener, Canada
Watch: The Throne
Posts: 375
|
A material can be scratched by anything that is harder than it. There are things harder than ceramic.
|
9 June 2013, 02:47 AM | #15 |
"TRF" Member
Join Date: Aug 2009
Location: USA
Posts: 19,706
|
Price of fame. You were unlucky. Hopefully you'll have years of no scratch wear. :-)
|
9 June 2013, 03:15 AM | #16 |
"TRF" Member
Join Date: Dec 2011
Real Name: Matthew
Location: Marbella
Watch: Exp 216570 Polar
Posts: 357
|
I think it might be worth trying to polish it out as someone else mentioned. The ONLY thing is, and I can tell you from experience, polishing it will cause the light reflection on that area of the bezel to be warped (i.e. no longer uniform). If you can live with that, might be worth a shot.
|
9 June 2013, 03:54 AM | #17 |
2024 SubLV41 Pledge Member
Join Date: Dec 2010
Real Name: PaulG
Location: Georgia
Posts: 42,024
|
Pic???
__________________
Does anyone really know what time it is? |
9 June 2013, 04:04 AM | #18 |
"TRF" Member
Join Date: Jan 2009
Location: UK
Watch: Seamaster
Posts: 181
|
Pic as requested........,sorry for the quality
|
9 June 2013, 04:09 AM | #19 |
"TRF" Member
Join Date: Jan 2009
Location: UK
Watch: Seamaster
Posts: 181
|
This might be a bit better
|
9 June 2013, 04:13 AM | #20 |
Banned
Join Date: Feb 2013
Real Name: Jon
Location: Kitchener, Canada
Watch: The Throne
Posts: 375
|
What a disaster. I hope it works out for you.
|
9 June 2013, 04:26 AM | #21 |
"TRF" Member
Join Date: Jan 2009
Location: UK
Watch: Seamaster
Posts: 181
|
And a better one still. Novice photographer
|
9 June 2013, 05:27 AM | #22 |
2024 SubLV41 Pledge Member
Join Date: Dec 2010
Real Name: PaulG
Location: Georgia
Posts: 42,024
|
Thanks x3. Wow - that is a gouge for sure vs a scratch.
__________________
Does anyone really know what time it is? |
9 June 2013, 05:41 AM | #23 |
"TRF" Member
Join Date: Jan 2009
Location: UK
Watch: Seamaster
Posts: 181
|
No definitely not residue. When I ran my finger over it I could feel the indentation. Also I have tried to wash it, polish it etc.........anything to remove it but with no success.
As I said previously I can't remember banging the watch. The ironic thing is I have owned 2 Rolex Submariners, both with aluminium bezels and never scratched either. BTW thanks to everyone for your input |
21 July 2013, 02:41 AM | #24 |
Member
Join Date: Feb 2010
Location: 35.0844° N, 106.6
Posts: 195
|
|
9 June 2013, 04:21 AM | #25 |
"TRF" Member
Join Date: Oct 2011
Location: hastings, UK
Posts: 98
|
They say virtually scratch proof, so not 100% scratch proof, so guessing depends on how hard you hit the watch.
The only problem is if you have it repaired, you may do the same thing again in the next few years, wonder if you can keep polishing it out if possible or have to have it replaced? |
9 June 2013, 05:19 AM | #26 |
Banned
Join Date: Feb 2008
Location: United States
Posts: 931
|
I've read and bookmarked the following thread in case I ever need to use it. Not sure if it will work on yours but it's been proven to work on scrapes and light scratches. You may want to try it if you are comfortable doing it yourself.
http://rolexforums.com/showthread.php?t=214943 |
9 June 2013, 05:35 AM | #27 | |
2024 SubLV41 Pledge Member
Join Date: Dec 2010
Real Name: PaulG
Location: Georgia
Posts: 42,024
|
Quote:
__________________
Does anyone really know what time it is? |
|
9 June 2013, 05:23 AM | #28 |
Banned
Join Date: May 2013
Real Name: Dan
Location: UK
Watch: 116528
Posts: 1,049
|
The rest of the watch still looks pretty clean, how did you manage to bump it hard enough to scratch the bezel and yet not the case? It must have hit at just the wrong angle on something sharp. As other have suggested, are you SURE it's not residue from whatever you hit?
|
9 June 2013, 05:34 AM | #29 |
"TRF" Member
Join Date: Jan 2013
Real Name: JD
Location: Jersey
Watch: Dj2 tt, 126610LV
Posts: 772
|
Are you sure it's a scratch and not a mark on the surface from what ever you banged it on.... If it is scratched you must have tapped that puppy pretty hard
__________________
It's not easy being green |
9 June 2013, 05:46 AM | #30 |
"TRF" Member
Join Date: Apr 2010
Real Name: J
Location: The great Midwest
Watch: youlookinat?
Posts: 2,369
|
That royally sucks. As kilyung stated, its probably/most likely from a diamond.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.