ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

sirjohnbrian · 6 November 2008, 05:12 AM

Hanging around this forum has made me appreciate my Rolexes a whole lot more, maybe too much. Below is my first Rolex, a SS midsize DJ that I received in 1990 from my Mother as a present when I graduated.

I never thought much of it except for sentimental value until I bought two new Rolexes this past year. Since then, and since I've been on this forum, I've grown to liking it a whole lot more. Now that I'm looking closer at it, I've noticed that the tritium over the 1 and 2 o'clock markers is off center.

Since I've had this watch, it's been serviced three times at an AD. I'm reasonably certain no one has touched the dial. Is this an acceptable level of asymmetry for a Rolex product? Does this change the value of the watch in any way like an imperfect quarter (not that I would ever sell it)?

Am I making a mountain out of a mole hill??

RossInIllinois · 6 November 2008, 06:14 AM

It looks OK to me.

bodybump · 6 November 2008, 06:21 AM

By the way WELCOME TO TRF!!! It looks ok carlos... thats the effect of this Forum hahahahah sometimes you stare at your watches to much and find something wrong.. From 1 sec delayed to 1 second advance..from a little brush on the crown to the bezel etc etc i can go on and on and on...hahahahah sometimes you just have to look for imperfection on the watch even if there nothing to look at...hahaha

SLS · 6 November 2008, 06:51 AM

A straight on shot of the dial would help.
~Scott

Wolfgang427 · 6 November 2008, 08:32 AM

Quote:

Originally Posted by sirjohnbrian

Am I making a mountain out of a mole hill??

Yes.

Don't worry about it it looks fine and if it really bugs you get a new dial at the next service.

sirjohnbrian · 6 November 2008, 09:23 AM

I appreciate the input. I think it looks fine and at least I can say that there is something unique about the watch. Even if it was a manufacturing defect, I'm not going to change it.

I am curious though if anybody else has noticed "manufacturing imperfections" in their Rolexes.

oneillba · 6 November 2008, 09:32 AM

A perfect keepsake, even if it may be slightly imperfect.

Bisquitlips · 6 November 2008, 09:34 AM

I am a bit surprised that Rolex would let a "imperfect" dial out of the shop. Educate me...

6 November 2008, 05:12 AM	#1
sirjohnbrian "TRF" Member Join Date: Oct 2008 Location: PA Watch: 'chu lookin' at??? Posts: 964	Midsize DJ -- Is this a defect?? Hanging around this forum has made me appreciate my Rolexes a whole lot more, maybe too much. Below is my first Rolex, a SS midsize DJ that I received in 1990 from my Mother as a present when I graduated. I never thought much of it except for sentimental value until I bought two new Rolexes this past year. Since then, and since I've been on this forum, I've grown to liking it a whole lot more. Now that I'm looking closer at it, I've noticed that the tritium over the 1 and 2 o'clock markers is off center. Since I've had this watch, it's been serviced three times at an AD. I'm reasonably certain no one has touched the dial. Is this an acceptable level of asymmetry for a Rolex product? Does this change the value of the watch in any way like an imperfect quarter (not that I would ever sell it)? Am I making a mountain out of a mole hill?? Attached Images __________________ "Clothes make the man. Naked people have little or no influence on society." Mark Twain "Facts are meaningless. You could use facts to prove anything that's even remotely true." Homer Simpson SS Midsize DJ 68274 "L" TT Jubilee DJ 116233 "Z" Sea Dweller DS 116660 "V" SS White Dial Daytona "V"

6 November 2008, 06:21 AM	#3
bodybump ⭐⭐⭐⭐⭐⭐ 2024 SubLV41 Sponsor & Boutique Seller Join Date: Sep 2008 Real Name: Oscar Location: Florida Watch: Me!!! Posts: 23,233	By the way WELCOME TO TRF!!! It looks ok carlos... thats the effect of this Forum hahahahah sometimes you stare at your watches to much and find something wrong.. From 1 sec delayed to 1 second advance..from a little brush on the crown to the bezel etc etc i can go on and on and on...hahahahah sometimes you just have to look for imperfection on the watch even if there nothing to look at...hahaha __________________

6 November 2008, 06:51 AM	#4
SLS "TRF" Member Join Date: Aug 2006 Real Name: Scott Location: GMT -7 Watch: GMT's & Sub's Posts: 10,401	A straight on shot of the dial would help. ~Scott __________________ "The bitterness of poor quality remains long after the sweetness of lower price is forgotten." -Benjamin Franklin Member No. 922

6 November 2008, 09:23 AM	#6
sirjohnbrian "TRF" Member Join Date: Oct 2008 Location: PA Watch: 'chu lookin' at??? Posts: 964	I appreciate the input. I think it looks fine and at least I can say that there is something unique about the watch. Even if it was a manufacturing defect, I'm not going to change it. I am curious though if anybody else has noticed "manufacturing imperfections" in their Rolexes. __________________ "Clothes make the man. Naked people have little or no influence on society." Mark Twain "Facts are meaningless. You could use facts to prove anything that's even remotely true." Homer Simpson SS Midsize DJ 68274 "L" TT Jubilee DJ 116233 "Z" Sea Dweller DS 116660 "V" SS White Dial Daytona "V"

6 November 2008, 09:32 AM	#7
oneillba "TRF" Member Join Date: Apr 2008 Real Name: Brian Location: Hamilton, MI USA Watch: My beloved TT DJ Posts: 3,831	A perfect keepsake, even if it may be slightly imperfect. __________________ My Trusty TT DJ

6 November 2008, 06:14 AM	#2
RossInIllinois Banned Join Date: Jun 2008 Real Name: Ross Location: Chicago Area Watch: GMT 2 Posts: 324	It looks OK to me.

6 November 2008, 09:34 AM	#8
Bisquitlips 2024 Pledge Member Join Date: Sep 2008 Real Name: Richard Location: USA Watch: YM Deep Space Posts: 12,521	I am a bit surprised that Rolex would let a "imperfect" dial out of the shop. Educate me... __________________ Rolex Yacht-Master 40mm (SS-YG / Deep Space MOP) 16623 Breitling Aerospace Titanium / 18K with UTC. Omega Speedmaster 3510.50 Oris TT1 Pro Diver Regulator 43MM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode