ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

shouldyouupgrade · 26 October 2019, 12:59 AM

1. lume matches
2. date windows (silver) looks original
3. bezel looks good(i guess) blue/black
4. bracelet has hollow links (i am also guessing it's correct??)

Trog · 26 October 2019, 01:20 AM

S/n?

shouldyouupgrade · 26 October 2019, 01:26 AM

in the 3 Million

Trog · 26 October 2019, 01:31 AM

Not sure about the HK market, but I would expect to pay about $14kUSD in our market for a similar 1675.

shouldyouupgrade · 26 October 2019, 01:33 AM

Quote:

Originally Posted by Trog

Not sure about the HK market, but I would expect to pay about $14kUSD in our market for a similar 1675.

Thanks, for your feedback. Maybe i used the wrong title. I own a 16710, but this is my first foray into 1675 and im still learning, i just like to see if everything checks out on this watch.

price is secondary.

blowfish89 · 26 October 2019, 01:36 AM

Yes

Kingface66 · 26 October 2019, 01:43 AM

Cracking up over “14 large” (said in Danny DeVito’s voice from Get Shorty)

Tom1675 · 26 October 2019, 06:34 AM

Dial is MK5, which a 3mil wasn't born with... $14k is a lot imho. No obscene, but a lot.

77T · 26 October 2019, 09:37 AM

Quote:

Originally Posted by Tom1675

Dial is MK5, which a 3mil wasn't born with... $14k is a lot imho. No obscene, but a lot.

True, no doubt about that - but before Rolex began specific Service Dial procedures, the Mark 5 dials doubled as a service dial for earlier 1675s when the original Mark 2-4 dial stock had been depleted.

So could have been a service swap.

Quote:

Originally Posted by shouldyouupgrade

Thanks, for your feedback. Maybe i used the wrong title. I own a 16710, but this is my first foray into 1675 and im still learning, i just like to see if everything checks out on this watch.

price is secondary.

The watch seems fine but not all original. As long as price is secondary, all is fine.

You can go about a 1675 learning quest a couple of ways.

Overspend for 1675’s that don’t perk, or do more pre-sale check-up’s in TRF’s vintage section.

Sent from my iPhone using Tapatalk Pro

Alex The Watch Guy · 26 October 2019, 07:59 AM

$14K with a blueback insert and wrong dial, that's a lot of money for a watch that's not period correct. This watch should be priced around $11K. Hang around here and you'll find better deals.

tommy67 · 26 October 2019, 08:23 AM

Certainly

springer · 26 October 2019, 09:58 AM

No I wouldn't.

Dan S · 26 October 2019, 10:02 AM

I dunno. Dat's a lotta simoleons.

petehk · 26 October 2019, 05:09 PM

Unfortunately, vintage Rolex prices here in HK are abit higher than US and UK. Good quality pieces are difficult to come by and prices here are heavily influenced by Japan where prices are sky high at the moment, likely due to the strong economy.

Sent from my ONEPLUS A6003 using Tapatalk

vtec96 · 27 October 2019, 07:05 AM

Oh yea!!! Of course!

Sent from my iPhone using Tapatalk

athom · 28 October 2019, 02:43 AM

service dial if 3 million...

shouldyouupgrade · 28 October 2019, 05:13 PM

Quote:

Originally Posted by athom

service dial if 3 million...

Thanks, appreciate your feedback. the lume on the hand is perfect with the indicies.. isn't that a good thing? does it matter if it's a service dial?

Quote:

Originally Posted by petehk

Unfortunately, vintage Rolex prices here in HK are abit higher than US and UK. Good quality pieces are difficult to come by and prices here are heavily influenced by Japan where prices are sky high at the moment, likely due to the strong economy.

Much harder to find these in Asia for sure.

Quote:

Originally Posted by Alex The Watch Guy

$14K with a blueback insert and wrong dial, that's a lot of money for a watch that's not period correct. This watch should be priced around $11K. Hang around here and you'll find better deals.

Thanks, appreciate your feedback, will do, im just nervous buying vintage over the internet based on the photo instead of actually seeing it and sourcing it from a good dealer.

Quote:

Originally Posted by Tom1675

Dial is MK5, which a 3mil wasn't born with... $14k is a lot imho. No obscene, but a lot.

Sourcing such good piece is a bit harder where im at.. Lucky to even have them in the shop.

Quote:

Originally Posted by Kingface66

Cracking up over “14 large” (said in Danny DeVito’s voice from Get Shorty)

wasn't my intention, but it's time to search what you meant.

Quote:

Originally Posted by Trog

Not sure about the HK market, but I would expect to pay about $14kUSD in our market for a similar 1675.

you should see japan market.. it's crazy

Quote:

Originally Posted by springer

No I wouldn't.

This from Mr. Springer is all i need to validate. thank you!

athom · 29 October 2019, 03:23 AM

Quote:

Originally Posted by shouldyouupgrade

Thanks, appreciate your feedback. the lume on the hand is perfect with the indicies.. isn't that a good thing? does it matter if it's a service dial?

For me yes. Also it has a big impact on the price.

Frosty · 31 October 2019, 05:02 PM

Quote:

Originally Posted by shouldyouupgrade

...This from Mr. Springer is all i need to validate. thank you!

I would have to agree with you there!

1William · 28 October 2019, 09:01 PM

I would not.

Yaz · 28 October 2019, 09:18 PM

A bit expensive but it is a beauty !
If you want it, not just as a pure investment, go get it...

swish77 · 29 October 2019, 12:25 AM

Have you seen the dial/hands under a UV light? Something about it seems a little too perfect in the tone/color match. And look at the lower right corner of the 6 o'clock marker.

It could be fine, but I'd definitely want to confirm that it's original tritium, even if it is a service dial and hands.

dimag333 · 29 October 2019, 12:36 AM

Quote:

Originally Posted by swish77

Have you seen the dial/hands under a UV light? Something about it seems a little too perfect in the tone/color match. And look at the lower right corner of the 6 o'clock marker.

It could be fine, but I'd definitely want to confirm that it's original tritium, even if it is a service dial and hands.

tip of 12 too looks like possible relume/patina job

steve

Kingface66 · 29 October 2019, 02:34 AM

Quote:

Originally Posted by dimag333

tip of 12 too looks like possible relume/patina job

steve

That wouldn't prove a relume.The luminous material van shrink up a little revealing the white beneath it.

frebay · 29 October 2019, 01:58 AM

Quote:

Originally Posted by swish77

Have you seen the dial/hands under a UV light? Something about it seems a little too perfect in the tone/color match. And look at the lower right corner of the 6 o'clock marker.

It could be fine, but I'd definitely want to confirm that it's original tritium, even if it is a service dial and hands.

If a hand has a cracked and has new tritium would it lower the value?

RC2 · 29 October 2019, 11:54 AM

Quote:

Originally Posted by frebay

If a hand has a cracked and has new tritium would it lower the value?

Hands look too perfect

Sent from my iPhone using Tapatalk

Mr Perfect · 29 October 2019, 04:39 AM

Quote:

Originally Posted by swish77

Have you seen the dial/hands under a UV light? Something about it seems a little too perfect in the tone/color match. And look at the lower right corner of the 6 o'clock marker.

It could be fine, but I'd definitely want to confirm that it's original tritium, even if it is a service dial and hands.

Agree, I do not like the dial/hands.

1665fan · 29 October 2019, 05:10 AM

Service hand, dial, and insert.....10k max

GGGMT · 31 October 2019, 04:46 PM

No

Sent from my iPhone using Tapatalk

yons78 · 1 November 2019, 04:36 AM

Certainly not.

26 October 2019, 12:59 AM	#1
shouldyouupgrade "TRF" Member Join Date: Nov 2017 Location: Hong Kong Posts: 37	Would you paid 14 large for this 1675? 1. lume matches 2. date windows (silver) looks original 3. bezel looks good(i guess) blue/black 4. bracelet has hollow links (i am also guessing it's correct??)

26 October 2019, 09:58 AM	#12
springer 2024 SubLV41 Pledge Member Join Date: Apr 2008 Real Name: jP Location: Texas Watch: GMT-MASTER Posts: 17,319	No I wouldn't. __________________ Member of NAWCC since 1990. INSTAGRAM USER NAME: SPRINGERJFP Visit my Instagram page to view some of the finest vintage GMTs anywhere - as well as other vintage classics.

26 October 2019, 10:02 AM	#13
Dan S 2024 Pledge Member Join Date: Oct 2018 Location: Colorado, USA Posts: 6,296	I dunno. Dat's a lotta simoleons. __________________ @oldwatchdan on IG

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

26 October 2019, 01:20 AM	#2
Trog Banned Join Date: Apr 2014 Location: Great White North Posts: 696	S/n?

26 October 2019, 01:26 AM	#3
shouldyouupgrade "TRF" Member Join Date: Nov 2017 Location: Hong Kong Posts: 37	in the 3 Million

26 October 2019, 01:31 AM	#4
Trog Banned Join Date: Apr 2014 Location: Great White North Posts: 696	Not sure about the HK market, but I would expect to pay about $14kUSD in our market for a similar 1675.

26 October 2019, 01:36 AM	#6
blowfish89 "TRF" Member Join Date: Sep 2014 Location: Canada Watch: 16800 Matte Posts: 398	Yes

26 October 2019, 01:43 AM	#7
Kingface66 2024 Pledge Member Join Date: Aug 2013 Location: The Empire State Watch: Many Posts: 3,462	Cracking up over “14 large” (said in Danny DeVito’s voice from Get Shorty)

26 October 2019, 06:34 AM	#8
Tom1675 "TRF" Member Join Date: Feb 2016 Real Name: Tom Location: Los Angeles Posts: 1,187	Dial is MK5, which a 3mil wasn't born with... $14k is a lot imho. No obscene, but a lot.

26 October 2019, 07:59 AM	#10
Alex The Watch Guy 2024 Pledge Member Join Date: Nov 2012 Location: @Home Posts: 245	$14K with a blueback insert and wrong dial, that's a lot of money for a watch that's not period correct. This watch should be priced around $11K. Hang around here and you'll find better deals.

26 October 2019, 08:23 AM	#11
tommy67 Banned Join Date: Nov 2018 Location: United States Posts: 64	Certainly

26 October 2019, 05:09 PM	#14
petehk "TRF" Member Join Date: Mar 2018 Location: Hong Kong Watch: Just Rolex Posts: 79	Unfortunately, vintage Rolex prices here in HK are abit higher than US and UK. Good quality pieces are difficult to come by and prices here are heavily influenced by Japan where prices are sky high at the moment, likely due to the strong economy. Sent from my ONEPLUS A6003 using Tapatalk

27 October 2019, 07:05 AM	#15
vtec96 "TRF" Member Join Date: Apr 2017 Location: CGY Posts: 27	Oh yea!!! Of course! Sent from my iPhone using Tapatalk

28 October 2019, 02:43 AM	#16
athom "TRF" Member Join Date: Oct 2017 Location: Paris (France) Posts: 688	service dial if 3 million...

28 October 2019, 09:01 PM	#20
1William 2024 SubLV41 Pledge Member Join Date: Nov 2010 Location: North Carolina Watch: Rolex/Others Posts: 47,801	I would not.

28 October 2019, 09:18 PM	#21
Yaz "TRF" Member Join Date: Nov 2017 Location: GVA Watch: Rolex 16710 Posts: 1,631	A bit expensive but it is a beauty ! If you want it, not just as a pure investment, go get it...

29 October 2019, 12:25 AM	#22
swish77 2024 Pledge Member Join Date: Jan 2009 Real Name: Aaron Location: CT/NYC Watch: ing the time! Posts: 7,001	Have you seen the dial/hands under a UV light? Something about it seems a little too perfect in the tone/color match. And look at the lower right corner of the 6 o'clock marker. It could be fine, but I'd definitely want to confirm that it's original tritium, even if it is a service dial and hands.

29 October 2019, 05:10 AM	#28
1665fan "TRF" Member Join Date: Oct 2017 Location: East coast Posts: 6,660	Service hand, dial, and insert.....10k max

31 October 2019, 04:46 PM	#29
GGGMT 2024 SubLV41 Pledge Member Join Date: Aug 2013 Location: Itinerant Watch: 79010sg Posts: 8,347	No Sent from my iPhone using Tapatalk

1 November 2019, 04:36 AM	#30
yons78 Banned Join Date: Aug 2018 Location: United States Posts: 50	Certainly not.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)