ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

TonyJones · 12 March 2009, 08:14 AM

I’m trying to determine the legitimacy of this watch. Here are the items that concern me:

Has no serial number etched on outside casing.

Face cover is not crystal but plastic.

Has some slight pitting on screw back.

Four corners on back casing have “half-moon” marks where the metal band used to fit.

Date made.

Any help will be greatly appreciated.

Many thanks,

Tony

Spark · 12 March 2009, 08:38 AM

From what I can see from the picture it looks good to me.
The hands are correct Tudor Oyster Date hands.
The dial is a typical Rolex/Tudor linen style and matched with the hands would date the watch from approximately the mid to late 70's.
Being signed just Swiss at 6 is correct.
The serial number should be between the lugs, but they can wear through braclet rubbing, which is the way the marks were made on the case under the lugs.
The bracelet this watch would have worn was a folded Oyster bracelet, which probably got worn out and replaced with a strap, which happens a lot.
The crystal would be acrylic.
The cyclops magnification seems off, but it might be a camera trick or an aftermarket crystal (no big deal).
Hope this helps

tudorman8276 · 12 March 2009, 09:10 AM

Stan.

WatchTimes · 12 March 2009, 09:53 AM

Any #s would be on the case between the lugs, covered by the band.

Where are you expecting the #'s to be?

Obviously you are considering buying it.
Whats the seller asking.

TonyJones · 12 March 2009, 05:41 PM

Quote:

Originally Posted by JYogi

Any #s would be on the case between the lugs, covered by the band.

Where are you expecting the #'s to be?

Obviously you are considering buying it.
Whats the seller asking.

I thought the SN would be between the lugs, but the only marking is "stainless steel". I looked under the band and didn't see anything there either.

Do all Tudor's have the serial number marked between the lugs? Or do some only have it written inside the back cover.

This is a watch I purchased about 8 years ago, paid around $350.

stevemulholland3 · 12 March 2009, 06:27 PM

sometimes the serial is very hard to read without a loupe...they where not stamped as deep IMO during that period and many seem shallow and hard to read..

TonyJones · 13 March 2009, 07:28 AM

If anyone is interested in purchasing this watch, please pm me.

Thanks, Tony

12 March 2009, 08:14 AM	#1
TonyJones "TRF" Member Join Date: Mar 2009 Location: Columbus, OH Posts: 3	Tudor Prince Oysterdate - Questions I’m trying to determine the legitimacy of this watch. Here are the items that concern me: Has no serial number etched on outside casing. Face cover is not crystal but plastic. Has some slight pitting on screw back. Four corners on back casing have “half-moon” marks where the metal band used to fit. Date made. Any help will be greatly appreciated. Many thanks, Tony

12 March 2009, 09:10 AM	#3
tudorman8276 "TRF" Member Join Date: Apr 2008 Real Name: STAN Location: KY-USA Watch: Rolex Prez Posts: 12,583	...X-2, is okay... Stan.

12 March 2009, 09:53 AM	#4
WatchTimes 2024 ROLEX DATEJUST41 Pledge Member Join Date: Jun 2008 Real Name: JYogi/Jeremy Location: Metro Detroit USA Watch: It's a Rolex! Posts: 5,787	Any #s would be on the case between the lugs, covered by the band. Where are you expecting the #'s to be? Obviously you are considering buying it. Whats the seller asking. __________________ "You won't rise to the occasion - you'll default to your level of training." Barrett Tillman Kentucky Colonel, Tennessee Squire & Combat Leprechaun

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12 March 2009, 08:38 AM	#2
Spark "TRF" Member Join Date: Oct 2006 Real Name: Mark Location: U.K. Watch: Too Many Posts: 2,097	From what I can see from the picture it looks good to me. The hands are correct Tudor Oyster Date hands. The dial is a typical Rolex/Tudor linen style and matched with the hands would date the watch from approximately the mid to late 70's. Being signed just Swiss at 6 is correct. The serial number should be between the lugs, but they can wear through braclet rubbing, which is the way the marks were made on the case under the lugs. The bracelet this watch would have worn was a folded Oyster bracelet, which probably got worn out and replaced with a strap, which happens a lot. The crystal would be acrylic. The cyclops magnification seems off, but it might be a camera trick or an aftermarket crystal (no big deal). Hope this helps

12 March 2009, 06:27 PM	#6
stevemulholland3 Banned Join Date: Dec 2007 Real Name: steven Location: tampa bay Watch: 1680 18k sub Posts: 6,672	sometimes the serial is very hard to read without a loupe...they where not stamped as deep IMO during that period and many seem shallow and hard to read..

13 March 2009, 07:28 AM	#7
TonyJones "TRF" Member Join Date: Mar 2009 Location: Columbus, OH Posts: 3	If anyone is interested in purchasing this watch, please pm me. Thanks, Tony

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)