ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Solar · 17 April 2009, 12:02 AM

Reading the post here about damage to Rolexes. One poster wrote that his Cyclops fell off when his DJ fell on a tile floor.

Which begs the question, how do they attach Cyclops, and how do they remove them if they are scratched? Is it a big deal? Obviously, its some sort of glue, but being a woodworker who uses a variety of glues, I'm curious to know if anyone here has direct experience with this.

Chris

Atomant · 17 April 2009, 12:41 AM

Can't exactly tell you how is it attached or what kinda glue they use. It's glued on.

DSJ · 17 April 2009, 12:42 AM

Glue.

seantk · 17 April 2009, 12:55 AM

Probably a Crystal UV bonding adhesive.

Sean

rajurama · 17 April 2009, 12:57 AM

transparent glue...

FlyingMoose · 17 April 2009, 12:58 AM

I don't think they remove it if it's scratched, I think they just replace the whole crystal.

Solar · 17 April 2009, 02:09 AM

Quote:

Originally Posted by FlyingMoose

I don't think they remove it if it's scratched, I think they just replace the whole crystal.

That would make sense. I tried looking for something on the 'net showing the process of putting Cyclops to crystal, no luck yet.

C

watchmaker · 17 April 2009, 09:17 AM

To maintain my parts account t with Rolex, one of the tools I had to buy was a set of dies, which cover the entire crystal leaving a cyclops sized gap in the exact place to aid in resetting. As for the adhesive, a Rolex compound which I cannot divulge.

dkpw · 17 April 2009, 09:22 AM

Quote:

Originally Posted by watchmaker

To maintain my parts account t with Rolex, one of the tools I had to buy was a set of dies, which cover the entire crystal leaving a cyclops sized gap in the exact place to aid in resetting. As for the adhesive, a Rolex compound which I cannot divulge.

Thanks Scott - a very interesting, if still cryptic, insight.

Solar · 17 April 2009, 08:23 PM

Quote:

Originally Posted by dkpw

Thanks Scott - a very interesting, if still cryptic, insight.

Agreed, thanks for the info. Also the preceeding post by Father John about how they remove the cyclops, which would also make sense.

C

valentine · 17 April 2009, 09:19 AM

knowing rolex...its gorilla glue..but they'd come up with some 40 hour special process and call it something like glue-a-chrom.

thecoinopcollector · 17 April 2009, 09:34 AM

Quote:

Originally Posted by valentine

knowing rolex...its gorilla glue..but they'd come up with some 40 hour special process and call it something like glue-a-chrom.

This is something I will very rarely give up because its used way too much, but Valentine you deserve a

valentine · 17 April 2009, 09:35 AM

Quote:

Originally Posted by thecoinopcollector

This is something I will very rarely give up because its used way too much, but Valentine you deserve a

thanks marc!

glad somebody appreciated that one!

watchmaker · 17 April 2009, 09:28 AM

It is glue. The exact type, I don't know. I have a little White bottle I get from Rolex. No markings. It's uncommon to need to replace one though.

Dalton · 17 April 2009, 09:32 AM

It's called Seiko Glue.

rescue7 · 17 April 2009, 11:29 AM

Quote:

Originally Posted by watchmaker

It is glue. The exact type, I don't know. I have a little White bottle I get from Rolex. No markings. It's uncommon to need to replace one though.

Quote:

Originally Posted by Dalton

It's called Seiko Glue.

Thanks techy's, I always chat with the Rolex tech-expert at my AD.

postiff · 17 April 2009, 10:03 AM

Quote:

Originally Posted by Solar

Reading the post here about damage to Rolexes. One poster wrote that his Cyclops fell off when his DJ fell on a tile floor.

Which begs the question, how do they attach Cyclops, and how do they remove them if they are scratched? Is it a big deal? Obviously, its some sort of glue, but being a woodworker who uses a variety of glues, I'm curious to know if anyone here has direct experience with this.

Chris

Apparently not good enough…

Danny

<>

LocoNBroko · 17 April 2009, 10:37 AM

This may sound incredibly odd, but my watchmaker swears by "Super Glue" brand UV activating adhesive. I have chipped the cyclops on my 16610 twice and he has replaced them for me. He also has the "jigs" to properly align them when replacing. I have also been told that I better never chip the one on my GMT IIc because he cant get that replacement cyclops with AR.
The last time I had one replaced was in 2005 and the watch has been worn almost every day since with no issues.

pdxrolex · 17 April 2009, 11:44 AM

I believe there is an actual gasket on sport models. White derlin material- http://www.watchmaterial.com/catalog/l_sap206cn.jpg

jmsrolls · 17 April 2009, 08:17 PM

Someone posted the name of the glue last year - an exotic name I cannot recall.

Regardless, a couple of days of the crystal soaking in acetone allows easy removal.

Fr. John†

17 April 2009, 12:02 AM	#1
Solar "TRF" Member Join Date: Feb 2007 Location: North America Watch: their hands, baby. Posts: 1,116	How do they attach a Cyclops? Reading the post here about damage to Rolexes. One poster wrote that his Cyclops fell off when his DJ fell on a tile floor. Which begs the question, how do they attach Cyclops, and how do they remove them if they are scratched? Is it a big deal? Obviously, its some sort of glue, but being a woodworker who uses a variety of glues, I'm curious to know if anyone here has direct experience with this. Chris

17 April 2009, 12:41 AM	#2
Atomant "TRF" Member Join Date: Jun 2007 Location: Fernwood Posts: 3,455	Can't exactly tell you how is it attached or what kinda glue they use. It's glued on. __________________ 116613LN 16600SD 16610LV 116710 16710 16570 Speedy 3570.50 PAM25 Oris TT1 and a bunch of G-Shocks. Flipped: Daytona 116520 Seamaster 2231.80

17 April 2009, 12:42 AM	#3
DSJ "TRF" Member Join Date: Dec 2007 Real Name: David Location: USA Watch: your step! Posts: 7,882	Glue. __________________ Rolex. The Rolex of watches. 16570 Expy2 Noir, 116710 GMT Master II, 2552.80 SMP

17 April 2009, 12:55 AM	#4
seantk "TRF" Member Join Date: Dec 2007 Real Name: Sean Location: West Florida Posts: 2,671	Probably a Crystal UV bonding adhesive. Sean __________________ "Life is frittered away with detail... simplify, simplify!" Henry D. Thoreau

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

17 April 2009, 12:57 AM	#5
rajurama "TRF" Member Join Date: Oct 2008 Real Name: Rick Location: Wakanda Watch: amacallit Posts: 2,090	transparent glue...

17 April 2009, 12:58 AM	#6
FlyingMoose "TRF" Member Join Date: Dec 2007 Location: New York, USA Posts: 502	I don't think they remove it if it's scratched, I think they just replace the whole crystal.

17 April 2009, 09:17 AM	#8
watchmaker TechXpert Join Date: Feb 2009 Real Name: Scott Location: London Posts: 2,242	To maintain my parts account t with Rolex, one of the tools I had to buy was a set of dies, which cover the entire crystal leaving a cyclops sized gap in the exact place to aid in resetting. As for the adhesive, a Rolex compound which I cannot divulge.

17 April 2009, 09:19 AM	#11
valentine Banned Join Date: Jul 2008 Real Name: Justin Location: Baltimore, MD Watch: TT Diamond DJ Posts: 2,809	knowing rolex...its gorilla glue..but they'd come up with some 40 hour special process and call it something like glue-a-chrom.

17 April 2009, 09:28 AM	#14
watchmaker TechXpert Join Date: Feb 2009 Real Name: Scott Location: London Posts: 2,242	It is glue. The exact type, I don't know. I have a little White bottle I get from Rolex. No markings. It's uncommon to need to replace one though.

17 April 2009, 09:32 AM	#15
Dalton TechXpert Join Date: Mar 2008 Real Name: Dal Location: Seattle Watch: 168000 Posts: 1,614	It's called Seiko Glue.

17 April 2009, 10:37 AM	#18
LocoNBroko Banned Join Date: Feb 2008 Location: California Watch: GMTIIcSUBUBFDSDDS Posts: 334	This may sound incredibly odd, but my watchmaker swears by "Super Glue" brand UV activating adhesive. I have chipped the cyclops on my 16610 twice and he has replaced them for me. He also has the "jigs" to properly align them when replacing. I have also been told that I better never chip the one on my GMT IIc because he cant get that replacement cyclops with AR. The last time I had one replaced was in 2005 and the watch has been worn almost every day since with no issues.

17 April 2009, 11:44 AM	#19
pdxrolex "TRF" Member Join Date: Feb 2009 Location: US Posts: 123	I believe there is an actual gasket on sport models. White derlin material- http://www.watchmaterial.com/catalog/l_sap206cn.jpg

17 April 2009, 08:17 PM	#20
jmsrolls Banned Join Date: May 2008 Location: USA Posts: 3,185	Someone posted the name of the glue last year - an exotic name I cannot recall. Regardless, a couple of days of the crystal soaking in acetone allows easy removal. Fr. John†

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)