ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
|
29 December 2022, 08:00 AM | #1 |
"TRF" Member
Join Date: Dec 2022
Location: Utah, USA
Posts: 32
|
Timing your watches
It's always interesting to see how many folks track their watches accuracy, what tools they use, what they consider an acceptable range for watches, and what they look/test for compared to someone like a professional.
What are your opinions on this? For me, if I bought the watch and it was certified to run within a certain range, I would expect that for at least a few years unless I abused the crap out of it. I use the Watch Accuracy Meter app for timing most of my pieces, but it may be time to upgrade to the timegrapher's that everyone uses. One thing that was shocking to me, the accuracy of a watch can vary wildly depending on the orientation it's in, it's something I had to learn. We had a watch accuracy competition at our local watch club and an Oris took the crown with +1s average in 6 positions but the Omegas/Rolexes were choking on some of the positions, granted they were a few years older. A freaking Tissot Le Locle was at +0s at certain positions. |
29 December 2022, 08:45 AM | #2 |
2024 SubLV41 Pledge Member
Join Date: Dec 2010
Real Name: PaulG
Location: Georgia
Posts: 42,017
|
For average observations I have relied upon a website.
www.time.is The source atomic reference clock doesn’t drift, but the internet delay can vary by an unpredictable ms loss. Sent from my iPhone using Tapatalk Pro
__________________
Does anyone really know what time it is? |
30 December 2022, 12:23 AM | #3 |
"TRF" Member
Join Date: Jun 2009
Real Name: Brian
Location: Northern Virginia
Watch: One of Not Many
Posts: 17,892
|
I use an atomic clock app on my phone.
As long as the performance is close to spec I am happy. I use it to gauge if the watch is in need of service, not to split seconds
__________________
IWC Portugieser 7 Day, Omega Seamaster SMP300m, Vacheron Constantin Traditionnelle Complete Calendar, Glashutte PanoInverse, Glashutte SeaQ Panorama Date, Omega Aqua Terra 150, Omega CK 859, Omega Speedmaster 3861 Moonwatch, Breitling Superocean Steelfish, JLC Atmos Transparent Clock |
30 December 2022, 06:24 AM | #4 |
"TRF" Member
Join Date: Dec 2022
Location: Utah, USA
Posts: 32
|
Interesting! So basically when you see your watch go from +1-3s a day to +15-20, you're thinking it's time to at least demagnetize or service the watch.
|
30 December 2022, 12:47 AM | #5 |
2024 SubLV41 Pledge Member
Join Date: Mar 2013
Location: usa
Posts: 19,537
|
Oddly, I don’t obsess about timekeeping. I do about scratches though, overly so
|
30 December 2022, 08:31 AM | #6 |
"TRF" Member
Join Date: Nov 2016
Real Name: Andrew
Location: Champaign/Urbana
Watch: Always changing.
Posts: 104
|
I’m more focused on timing when a new watch comes in to make sure there aren’t any initial issues with the movement. After that, I’ll check every few months when I’m resetting the time, due to enough gain/loss that makes a difference to useful timekeeping.
I set my watches to time.gov, wear them for a week, check time.gov again and see what the average gain/loss is per day; that way I’m tracking normal use, including nightstand time. If I see a significant deviation to the stated accuracy, off it goes for a service. Works for me. |
30 December 2022, 04:53 PM | #7 |
"TRF" Member
Join Date: May 2021
Location: California
Posts: 123
|
I use an iOS app called “Movement - Watch Tracker”
It has a convenient interface where you can track the accuracy of your whole watch collection by logging data points over time. It works very well for me. Sent from my iPhone using Tapatalk |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.