The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX


Go Back   Rolex Forums - Rolex Forum > Rolex & Tudor Watch Topics > Rolex General Discussion

Reply
 
Thread Tools Display Modes
Old 14 August 2010, 11:49 PM   #1
compworld
"TRF" Member
 
Join Date: Jul 2010
Location: New York
Watch: Submariner
Posts: 95
Is it possible to change your own dials?

Is it possible to change your own dials? Say I wanted to buy a different dial for one of my Rolies, can I change it myself? Its a pain having to go to Tourney or NYC to change a dial. Not to mention the fee for the change.
compworld is offline   Reply With Quote
Old 14 August 2010, 11:52 PM   #2
Art 1
Banned
 
Join Date: Feb 2008
Location: Florida, Canada
Watch: Rol/Seik/Tud/Omega
Posts: 30,244
No.
Art 1 is offline   Reply With Quote
Old 15 August 2010, 12:08 AM   #3
TattooedGQ
"TRF" Member
 
TattooedGQ's Avatar
 
Join Date: Nov 2009
Real Name: Justin
Location: NY, USA
Watch: yo self!
Posts: 2,686
Quote:
Originally Posted by Art 1 View Post
No.
That's not completely accurate.....

CAN you change the dial yourself, Yes. With the right tools and know-how. Is it a good idea, probably not.
__________________
That boy's got the Devil in him.
Rolex: I think I'm up to 9??
Omega: Got a few of those too.
Breitling: And some of these.
TattooedGQ is offline   Reply With Quote
Old 15 August 2010, 12:28 AM   #4
Art 1
Banned
 
Join Date: Feb 2008
Location: Florida, Canada
Watch: Rol/Seik/Tud/Omega
Posts: 30,244
Quote:
Originally Posted by TattooedGQ View Post
That's not completely accurate.....

CAN you change the dial yourself, Yes. With the right tools and know-how. Is it a good idea, probably not.
True, but I was answering the OP. He called his Rolex a Rollie. No one that I know who could swap a dial would use that term.
Art 1 is offline   Reply With Quote
Old 14 August 2010, 11:57 PM   #5
compworld
"TRF" Member
 
Join Date: Jul 2010
Location: New York
Watch: Submariner
Posts: 95
:(
compworld is offline   Reply With Quote
Old 15 August 2010, 12:06 AM   #6
AWATCH
"TRF" Member
 
AWATCH's Avatar
 
Join Date: Jul 2009
Real Name: al
Location: GEORGIA
Watch: Explorer II
Posts: 1,759
Quote:
Originally Posted by compworld View Post
Is it possible to change your own dials? Say I wanted to buy a different dial for one of my Rolies, can I change it myself? Its a pain having to go to Tourney or NYC to change a dial. Not to mention the fee for the change.
If you think you are qualified to disasemble your watch and have the proper tools and training........ yea
Its sorta like heart surgery or flying a jet its easy if you know how
__________________


Al
AWATCH is offline   Reply With Quote
Old 15 August 2010, 12:13 AM   #7
compworld
"TRF" Member
 
Join Date: Jul 2010
Location: New York
Watch: Submariner
Posts: 95
Quote:
Originally Posted by AWATCH View Post
If you think you are qualified to disasemble your watch and have the proper tools and training........ yea
Its sorta like heart surgery or flying a jet its easy if you know how
Plane, well small one, yea, no prob. Heart surgey, prob. not. I just need a test watch to practice on. Anyone want to sacrifice, I mean volunteer their watch as the test case?
compworld is offline   Reply With Quote
Old 15 August 2010, 12:16 AM   #8
TattooedGQ
"TRF" Member
 
TattooedGQ's Avatar
 
Join Date: Nov 2009
Real Name: Justin
Location: NY, USA
Watch: yo self!
Posts: 2,686
buy a cheapo off of ebay. Principles will be the same.
__________________
That boy's got the Devil in him.
Rolex: I think I'm up to 9??
Omega: Got a few of those too.
Breitling: And some of these.
TattooedGQ is offline   Reply With Quote
Old 15 August 2010, 12:28 AM   #9
AWATCH
"TRF" Member
 
AWATCH's Avatar
 
Join Date: Jul 2009
Real Name: al
Location: GEORGIA
Watch: Explorer II
Posts: 1,759
If you really want to try Justin has the right idea, buy a cheap watch and go for it or better yet build a watch or two. Check out Ofrei.com, parts and a small beginner course is available where you can build yourself a nice watch and learn the fundamentals. Get lots of practice, you will probably scratch and/or ruin several dials and hand sets. you will probably spend a couple of hundred on some good tools and who knows you might have the start of a very rewarding hobby.
__________________


Al
AWATCH is offline   Reply With Quote
Old 15 August 2010, 01:04 AM   #10
Route 66
"TRF" Member
 
Route 66's Avatar
 
Join Date: Apr 2010
Real Name: Steve
Location: Burbank, CA
Watch: 214270 Mark II
Posts: 4,121
I have to give you credit.

I'd be scared to death to attempt to change a dial myself.
Route 66 is offline   Reply With Quote
Old 15 August 2010, 01:22 AM   #11
Dan Pierce
2024 Pledge Member
 
Dan Pierce's Avatar
 
Join Date: Dec 2006
Real Name: D'OH!
Location: Kentucky
Watch: Rolex-1 Tudor-3
Posts: 36,217
My watchmaker has done it for me but nothing I'd attempt on my own.
dP
__________________
TRF Member# 1668
Bass Player in TRF "AFTER DARK" Bar & NightClub Band
Commander-in-Chief of The Nylon Nation
The Crown & Shield Club
Honorary Member of P-Club
Dan Pierce is offline   Reply With Quote
Old 15 August 2010, 01:28 AM   #12
Idle Swede
Suspended
 
Join Date: Oct 2008
Real Name: Leo
Location: Boca Raton
Posts: 13,820
I don't have all the necessary tools including a pressure tester but if I did.............................


No, I wouldn't.
Idle Swede is offline   Reply With Quote
Old 15 August 2010, 12:20 AM   #13
Welshwatchman
"TRF" Member
 
Welshwatchman's Avatar
 
Join Date: Apr 2006
Real Name: Paul
Location: Wales, UK
Posts: 14,578
Quote:
Originally Posted by compworld View Post
Is it possible to change your own dials? Say I wanted to buy a different dial for one of my Rolies, can I change it myself? Its a pain having to go to Tourney or NYC to change a dial. Not to mention the fee for the change.
Yes, it's entirely possible.

You just need the right tools and acquire the appropriate skills.

Several here, non watchmakers, have replaced dial/hands on their own watches.

Give it a go and post your results here.
__________________
..33
Welshwatchman is offline   Reply With Quote
Old 15 August 2010, 02:15 PM   #14
Andad
2024 SubLV41 Pledge Member
 
Andad's Avatar
 
Join Date: Nov 2006
Real Name: Eddie
Location: Australia
Watch: A few.
Posts: 37,534
Quote:
Originally Posted by Welshwatchman View Post
Yes, it's entirely possible.

You just need the right tools and acquire the appropriate skills.

Several here, non watchmakers, have replaced dial/hands on their own watches.

Give it a go and post your results here.
I had to subscribe to this thread Paul.
__________________
E

Andad is offline   Reply With Quote
Old 15 August 2010, 04:47 AM   #15
Rolex tom
"TRF" Member
 
Join Date: Aug 2010
Real Name: Thomas
Location: London, England
Watch: rolex,seiko,Omega
Posts: 192
need the right tools and know how if you wanted to paint the hands or anything thats not hard but changeing the dial is hard
Rolex tom is offline   Reply With Quote
Old 15 August 2010, 05:00 AM   #16
Speed
"TRF" Member
 
Speed's Avatar
 
Join Date: Aug 2009
Location: USA
Posts: 19,706
No way man...I wouldn't do it.
Speed is offline   Reply With Quote
Old 15 August 2010, 05:20 AM   #17
PeteNYC13
2024 Pledge Member
 
PeteNYC13's Avatar
 
Join Date: Nov 2009
Real Name: Pete
Location: USA
Watch: Rolex
Posts: 1,607
If you are very handy and don't mind ruining your watch, go for it!
If you have doubts, either don't change it or maybe make a deal with a watchmaker that if buy the dial from them, they change the dial included in the price.

I wouldn't risk the damage that can be done working with microscopic pieces and tools if I wasn't 100% certain that I could complete the task. The fact that you are asking makes me think you have doubts?! lol

Good luck,
-Pete
__________________
SS Submariner K16610
SS Submariner F16610LV
SS/P Yachtmaster M16622
SS Black Dial Daytona M116520
SS Explorer II D16570
PeteNYC13 is offline   Reply With Quote
Old 15 August 2010, 05:21 AM   #18
Jocke
2024 SubLV41 Pledge Member
 
Jocke's Avatar
 
Join Date: Apr 2006
Real Name: Jocke
Location: Sweden
Watch: A dozen of Rolex's
Posts: 22,541
Quote:
Originally Posted by compworld View Post
Is it possible to change your own dials? Say I wanted to buy a different dial for one of my Rolies, can I change it myself? Its a pain having to go to Tourney or NYC to change a dial. Not to mention the fee for the change.
I will say if you ask about this, just take your watch to a watchmaker.
__________________
This message is written in perfect swenglish.

What is best a custom Rolex or a Rolex that is stuck in custom?

Buy a professional camera and you´re a professional
photographer, buy a flute and you own a flute.
Jocke is offline   Reply With Quote
Old 15 August 2010, 01:15 PM   #19
cjcar631
Banned
 
Join Date: Feb 2010
Real Name: Joseph
Location: Massachusetts
Watch: Submariner/Date
Posts: 366
Any of you remember the old John Cameron Swayze comercial for Timex where he had the elephant stand on the watch and then showed the audience how it was still ticking? Well I have a similiar story that led me to a DIY project on my Omega. While changing the oil and filter on my wife's car the other day I suddenly realize I'm wearing my Seamaster. I'm in a hurry cuz my wife needs the car ASAP. So I take it off and place it on the grass near where I'm laying. After gathering up my tools, I drive the car off the ramps... etc. and away she goes. OOPS... my freakin' watch! Back out I go and low and behold my Seamaster is... shall we say... a little under the weather, (broken crystal, all four hands off, one lume marker at 12 off). Suprisingly the bezel ring popped off but was not bent... don't ask me how. I call Omega to get a quote and was not suprised to hear that I'd probably be better off investing in a a new one. Undeterred, I head on over to Otto Frei... order up a new crystal, Google the neccessary 411, and get down to work. Here's the end result... not bad for my first time out.

Name:  DYI003.jpg
Views: 101
Size:  151.9 KB

Name:  DYI001.jpg
Views: 100
Size:  144.4 KB
Got a little messy with the glue. the spot below the 2 in 22 is also a touch of glue... used a toothpick to apply it to the bottom of the lume marker.

Name:  DYI002.jpg
Views: 102
Size:  47.7 KB
The hands came out OK and the date still changes exactly at mid-night.

Most of the flaws you see in the close-ups are actually alot less visible when wearing the watch. I think the reason Omega was a bit reluctant to take it on was because, after hearing my story, they were understandably concerned with damage that may have been done to the movement. But all's well that ends well... I guess. I've been wearing the watch constantly now for about three weeks waiting for something to go wrong, but so far so good.



Last edited by cjcar631; 15 August 2010 at 01:31 PM.. Reason: spelling
cjcar631 is offline   Reply With Quote
Old 15 August 2010, 01:29 PM   #20
DCgator
"TRF" Member
 
DCgator's Avatar
 
Join Date: Jul 2010
Location: PNW
Watch: DS,BLNR,SubLV,DJ2
Posts: 8,123
Icon6

If you're really bent on having a different dial take it to a pro and be done with it. When I wanted a different dial for my TT Tbird (came with gold Tapestry and it got boring fast) I made a deal with Ben Bridge for free installation and paid the $150 for the brand new white dial with Romans. I have not regretted that change. Good luck!
DCgator is offline   Reply With Quote
Old 15 August 2010, 01:38 PM   #21
Boopie
"TRF" Member
 
Boopie's Avatar
 
Join Date: Aug 2007
Location: Beverly Hills, CA
Watch: Yachtmaster
Posts: 3,952
Dude, I'm hesitant to buff out a scratch on my Rolex's bracelet. There is no way I would open up the caseback. There would be too much dust, let alone no way to pressure-test the watch at home.
Boopie is offline   Reply With Quote
Old 15 August 2010, 02:02 PM   #22
pradeep
"TRF" Member
 
pradeep's Avatar
 
Join Date: Jul 2010
Real Name: Pradeep
Location: In a crazy world!
Watch: Rolex Day Dates
Posts: 265
Quote:
Originally Posted by cjcar631 View Post
Any of you remember the old John Cameron Swayze comercial for Timex where he had the elephant stand on the watch and then showed the audience how it was still ticking? Well I have a similiar story that led me to a DIY project on my Omega. While changing the oil and filter on my wife's car the other day I suddenly realize I'm wearing my Seamaster. I'm in a hurry cuz my wife needs the car ASAP. So I take it off and place it on the grass near where I'm laying. After gathering up my tools, I drive the car off the ramps... etc. and away she goes. OOPS... my freakin' watch! Back out I go and low and behold my Seamaster is... shall we say... a little under the weather, (broken crystal, all four hands off, one lume marker at 12 off). Suprisingly the bezel ring popped off but was not bent... don't ask me how. I call Omega to get a quote and was not suprised to hear that I'd probably be better off investing in a a new one. Undeterred, I head on over to Otto Frei... order up a new crystal, Google the neccessary 411, and get down to work. Here's the end result... not bad for my first time out.

Attachment 154805

Attachment 154806
Got a little messy with the glue. the spot below the 2 in 22 is also a touch of glue... used a toothpick to apply it to the bottom of the lume marker.

Attachment 154807
The hands came out OK and the date still changes exactly at mid-night.

Most of the flaws you see in the close-ups are actually alot less visible when wearing the watch. I think the reason Omega was a bit reluctant to take it on was because, after hearing my story, they were understandably concerned with damage that may have been done to the movement. But all's well that ends well... I guess. I've been wearing the watch constantly now for about three weeks waiting for something to go wrong, but so far so good.


Seems like you are a DIYer through and through!! Good job.. although I would have only attempted to work on a watch in that state if I couldn't get an experienced guy to do it.
pradeep is offline   Reply With Quote
Old 15 August 2010, 05:39 AM   #23
JJ Irani
Fondly Remembered
 
JJ Irani's Avatar
 
Join Date: May 2005
Real Name: JJ
Location: Auckland, NZ
Watch: ALL SOLD!!
Posts: 74,319
Quote:
Originally Posted by compworld View Post
Is it possible to change your own dials? Say I wanted to buy a different dial for one of my Rolies, can I change it myself? Its a pain having to go to Tourney or NYC to change a dial. Not to mention the fee for the change.
Are you a qualified watchmaker? If not, don't even think about it!! You wouldn't even know where to start, which tools to use...................and if you did make an attempt, rest assured you'd be looking at a whopping bill to set things right again!!
__________________
Words fail me in expressing my utmost thanks to ALL of you for this wonderful support during my hour of need!!

I firmly believe that my time on planet earth is NOT yet up!! I shall fight this to the very end.......and WIN!!
JJ Irani is offline   Reply With Quote
Old 15 August 2010, 01:49 PM   #24
FremStar
"TRF" Member
 
FremStar's Avatar
 
Join Date: May 2009
Real Name: Sam
Location: Gotham City
Watch: Wall Street
Posts: 9,954
Quote:
Originally Posted by JJ Irani View Post
Are you a qualified watchmaker? If not, don't even think about it!! You wouldn't even know where to start, which tools to use...................and if you did make an attempt, rest assured you'd be looking at a whopping bill to set things right again!!
FremStar is offline   Reply With Quote
Old 15 August 2010, 05:54 AM   #25
EchoBlueUK
"TRF" Member
 
EchoBlueUK's Avatar
 
Join Date: May 2009
Location: UK
Posts: 1,543
Just be prepared to ship all the bits to rsc when it all goes wrong.
EchoBlueUK is offline   Reply With Quote
Old 15 August 2010, 05:56 AM   #26
Rolesor
"TRF" Member
 
Rolesor's Avatar
 
Join Date: May 2009
Real Name: Brandon
Location: Toronto, ON
Watch: 116234
Posts: 4,150
If your a watchmaker then sure - if not don't even try it!
__________________
116234 - Blue Concentric Dial - Fluted Bezel - Oyster Bracelet

Tudor Black Bay 54 - Rubber Strap
Rolesor is offline   Reply With Quote
Old 15 August 2010, 06:23 AM   #27
ParisDakarBmw
Banned
 
Join Date: Dec 2009
Real Name: Paul
Location: New Haven, CT
Watch: 116610 Sub-C
Posts: 6,552
need screwdrivers, case back removel tool, correct hand removal tool, and a dust free environment.

1. remove the bracelet.

2. Set your watch to high noon perfectly, and leave the stem pulled out.

3. remove the caseback

4. remove the crown / stem assembly

5. two set screws hold the movement in place. Turn them in the tightening direction until the flanges on the screws allow the movement to spin. remove movement, and lay it on it's back carefully.

6. remove the hands gently, and place them to the side on a white envelope (no dust)

7. removing the dial is a little tricky, and would read up on how to pop the metal disk off without damaging it.

8. install new dial.

9. **don't scratch the hands, but use extra fine tweezers, and a loupe to see. Put them on gently at the 12 oclock position.

10. put the movement in after a light spray with dust removal spray. (can of air) be careful not to hold it too close. Make sure the inside of the crystal is dust free too.

11. line the movement up with the cyclops, and tighten the set screws in the loosening position. Make sure the two flanges line up correctly. Once the movement is lined up correctly. tighten the set screws down.

12. put the crown / stem assembly in, and test the movement.

13. put the case back on, and snug down.

14. hope to god you did it right
ParisDakarBmw is offline   Reply With Quote
Old 15 August 2010, 06:26 AM   #28
JJ Irani
Fondly Remembered
 
JJ Irani's Avatar
 
Join Date: May 2005
Real Name: JJ
Location: Auckland, NZ
Watch: ALL SOLD!!
Posts: 74,319
Quote:
Originally Posted by ParisDakarBmw View Post
need screwdrivers, case back removel tool, correct hand removal tool, and a dust free environment.

1. remove the bracelet.

2. Set your watch to high noon perfectly, and leave the stem pulled out.

3. remove the caseback

4. remove the crown / stem assembly

5. two set screws hold the movement in place. Turn them in the tightening direction until the flanges on the screws allow the movement to spin. remove movement, and lay it on it's back carefully.

6. remove the hands gently, and place them to the side on a white envelope (no dust)

7. removing the dial is a little tricky, and would read up on how to pop the metal disk off without damaging it.

8. install new dial.

9. **don't scratch the hands, but use extra fine tweezers, and a loupe to see. Put them on gently at the 12 oclock position.

10. put the movement in after a light spray with dust removal spray. (can of air) be careful not to hold it too close. Make sure the inside of the crystal is dust free too.

11. line the movement up with the cyclops, and tighten the set screws in the loosening position. Make sure the two flanges line up correctly. Once the movement is lined up correctly. tighten the set screws down.

12. put the crown / stem assembly in, and test the movement.

13. put the case back on, and snug down.

14. hope to god you did it right

You left out TWO of the most important things, Paul - EXPERIENCE & PRACTICE.

With all of those above instructions, if he's lacking the two things I've mentioned, I can bet you all of my 4 Rolexes that the end result is going to be one BIG SUPER MESS!!
__________________
Words fail me in expressing my utmost thanks to ALL of you for this wonderful support during my hour of need!!

I firmly believe that my time on planet earth is NOT yet up!! I shall fight this to the very end.......and WIN!!
JJ Irani is offline   Reply With Quote
Old 15 August 2010, 06:26 AM   #29
Jocke
2024 SubLV41 Pledge Member
 
Jocke's Avatar
 
Join Date: Apr 2006
Real Name: Jocke
Location: Sweden
Watch: A dozen of Rolex's
Posts: 22,541
Quote:
Originally Posted by ParisDakarBmw View Post
need screwdrivers, case back removel tool, correct hand removal tool, and a dust free environment.

1. remove the bracelet.

2. Set your watch to high noon perfectly, and leave the stem pulled out.

3. remove the caseback

4. remove the crown / stem assembly

5. two set screws hold the movement in place. Turn them in the tightening direction until the flanges on the screws allow the movement to spin. remove movement, and lay it on it's back carefully.

6. remove the hands gently, and place them to the side on a white envelope (no dust)

7. removing the dial is a little tricky, and would read up on how to pop the metal disk off without damaging it.

8. install new dial.

9. **don't scratch the hands, but use extra fine tweezers, and a loupe to see. Put them on gently at the 12 oclock position.

10. put the movement in after a light spray with dust removal spray. (can of air) be careful not to hold it too close. Make sure the inside of the crystal is dust free too.

11. line the movement up with the cyclops, and tighten the set screws in the loosening position. Make sure the two flanges line up correctly. Once the movement is lined up correctly. tighten the set screws down.

12. put the crown / stem assembly in, and test the movement.

13. put the case back on, and snug down.

14. hope to god you did it right
Will you please give us a step by step tutorial how you groom your dog so we know you know what you talk about.

__________________
This message is written in perfect swenglish.

What is best a custom Rolex or a Rolex that is stuck in custom?

Buy a professional camera and you´re a professional
photographer, buy a flute and you own a flute.
Jocke is offline   Reply With Quote
Old 15 August 2010, 07:06 AM   #30
ParisDakarBmw
Banned
 
Join Date: Dec 2009
Real Name: Paul
Location: New Haven, CT
Watch: 116610 Sub-C
Posts: 6,552
Quote:
Originally Posted by Jocke View Post
Will you please give us a step by step tutorial how you groom your dog so we know you know what you talk about.

Grab the dog.

Oil the clippers, and start cutting
ParisDakarBmw is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

OCWatches

Wrist Aficionado

My Watch LLC

WatchesOff5th

DavidSW Watches

Takuya Watches


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.