ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
|
4 July 2011, 04:59 PM | #1 |
"TRF" Member
Join Date: Feb 2010
Real Name: Philip Bowes
Location: England
Watch: 5500 Exp & 114270
Posts: 154
|
Performance on and off the winder.
I don't want to enter the debate about whether or not it is a good idea to use a watch winder, I know that opinions about this tend to be very polarised - the fact is I do use one so that the watch which I am not wearing is always fully wound.
Now I own two Explorers, a vintage 5500 and a modern 114270; in wear both of these tend to gain a few seconds every day, however when they are on the winder I have noticed that each of them gains significantly less than when on the wrist - in both cases the weekly gain is reduced to less than half the "normal" rate. I am not obsessive about accuracy and these observations do not concern me other than to understand why this should be so. Has anybody else observed this and, if so, can you offer any explanation? |
4 July 2011, 05:11 PM | #2 |
"TRF" Member
Join Date: Oct 2010
Location: New York
Posts: 401
|
Hi Gugnunc,
I hope this helps, I have never tried it but please let me know if it works. Q. Is there anyway that I can self regulate my Rolex? A. Yes you can self regulate your Rolex. The following information is from Rolex. It is interesting and might help correct for a few seconds of error in your watches timekeeping ability. If your watch loses or gains a few seconds per day (remember there are 86,400 seconds in 24 hours!), you can correct it without expert aid. The rate of a watch varies slightly depending upon its position. Take it off at night and place it as follows: 1. To gain a few seconds: Lay the watch flat with the dial uppermost. 2. To lose a few seconds: Lay the watch vertically with the winding-button downwards. 3. To lose rather more seconds: Lay the watch vertically with the winding-button uppermost. |
4 July 2011, 05:33 PM | #3 |
"TRF" Member
Join Date: Feb 2010
Real Name: Philip Bowes
Location: England
Watch: 5500 Exp & 114270
Posts: 154
|
Hello reecester,
Yes, I have tried this "regulation by position" technique - In my experience it does work but it is very marginal yielding about 1 or 2sec. change in a 12 hour period max. Have you observed this on and off winder phenomenon? |
4 July 2011, 07:08 PM | #4 | |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 53,061
|
Quote:
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.