ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
|
28 October 2011, 04:08 AM | #1 |
"TRF" Member
Join Date: Jul 2011
Location: New York
Posts: 149
|
11 years, never serviced, +:02/day - what would you do?
My 16610 P-serial just turned 11 this month. I've never had it serviced and it runs +:02 per day. Recently I picked up a 116000, so I have been rotating them out. When one is on, the other is in a Wolf winder.
My bezel insert has a good gouge, so I went to AD this morning to order a replacement insert ($75 BTW). The sales girl and I were talking about service, this AD offers 1st service free with purchase, and 10% off. (PM me if you want name/number). Anyway, I said my watch has never been serviced and I don't indend to until it runs poorly or isn't working. The sales girl was aghast, like was doing a bad thing. I know several people who have had issues once their watch has been serviced and I've been told by older folks that have been wearing Rolexes many decades more than me to only service when necessary. Am I wrong in this thinking? At $800 for a service, I figure if it aint broke, don't fix it. Am I doing a disservice to the watch by not getting it serviced? Am I running the risk of incurring further damage beyond whatever they do for $800 at a regular service by sending it when it keeps poor time or stops working all together? Thanks for feedback---- |
28 October 2011, 04:14 AM | #2 |
"TRF" Member
Join Date: Dec 2010
Real Name: thewatchguy
Location: UK
Watch: me buy gold..
Posts: 7,441
|
Its always good to get a service when Rolex say too. Every 4-5 years in most cases, its all well your watch running perfectly accurate but the movement inside will be running a little dry and will need re-oiling and loobing. Its your call but I would send her right of for a fresh service
__________________
Instagram.. @thewatchguy www.thewatchguyofficial.co.uk Got a GREEN Submariner 116610LV.. Visit the official thread here! http://www.rolexforums.com/showthread.php?t=179580 Don't forget to visit the Rolex & Attire thread too! http://www.rolexforums.com/showthread.php?t=215077 |
28 October 2011, 04:24 AM | #3 |
Banned
Join Date: Sep 2010
Real Name: Eric
Location: US
Watch: DateJust
Posts: 1,468
|
Send it in for service they will re-lubricate all the moving parts and also clean the watch. Another GREAT thing they do at service time is polish and finish your watch to like new condition using Rolex's factory sepcs for abrasion.
|
28 October 2011, 04:52 PM | #4 | |
"TRF" Member
Join Date: Jan 2011
Real Name: gus
Location: East Coast
Watch: APK & sometimes Y
Posts: 26,601
|
Quote:
really a personal preference here. 11 years is a good run, the price you quoted for service seems high, unless they are giving you a new crystal as well as a bezel? i ran mine for about 14 years without a service, finally the crown started to feel a bit off, so i brought it in. they fixed it without a word. ie no doom and gloom from RSC about excessive wear and tear, not even a mention. so, i would say if it is not calling your attention to any unusual performance, let it be.
__________________
|
|
28 October 2011, 04:24 AM | #5 |
2024 Pledge Member
Join Date: Jan 2009
Real Name: Chuck
Location: SW Florida
Watch: 16233,16610,214270
Posts: 11,196
|
I would find a watchmaker that services rolexes. You would probably save yourself $400.
__________________
16233 Y Serial Datejust 16610 Z Serial Submariner 214270 Explorer 114300 Oyster Perpetual 76200 Tudor Date+Day |
28 October 2011, 04:30 AM | #6 |
"TRF" Member
Join Date: Aug 2008
Real Name: Tom
Location: Switzerland
Watch: too many
Posts: 1,150
|
I would keep it going for another 11 years...
Tom |
28 October 2011, 04:34 AM | #7 |
2024 SubLV41 Pledge Member
Join Date: Apr 2006
Real Name: Jocke
Location: Sweden
Watch: A dozen of Rolex's
Posts: 22,541
|
Just pull out the crown 2 sec everyday and it will be spot on.
__________________
This message is written in perfect swenglish. What is best a custom Rolex or a Rolex that is stuck in custom? Buy a professional camera and you´re a professional photographer, buy a flute and you own a flute. |
28 October 2011, 04:39 AM | #8 |
TRF Moderator & 2024 SubLV41 Patron
Join Date: May 2007
Real Name: Larry
Location: Mojave Desert
Watch: GMT's
Posts: 43,515
|
It's up to you..
A watch is slowly wearing itself out with all the gears, parts, and pinions meshing together.. It will fail, eventually.. 800 bucks to have it overhauled, all gaskets and seals changed, worn parts replaced, and fresh oil.................... It's good insurance against catastrophic failure..
__________________
(Chill ... It's just a watch Forum.....) NAWCC Member |
28 October 2011, 06:48 PM | #9 |
"TRF" Member
Join Date: Sep 2008
Location: singapore
Posts: 6,424
|
|
28 October 2011, 07:32 PM | #10 |
"TRF" Member
Join Date: Sep 2011
Real Name: Richard
Location: Inverness, Scot.
Watch: Rolex 16030
Posts: 170
|
My Datejust (1984) is at this moment at Rolex for it's second service and third Jubilee bracelet. In between times it has been serviced twice locally at half the price but certainly not the standard. I wear it every day so it works hard. They do need serviced as pointed out above oil is cheaper than metal. You will sleep better knowing it is not going to grind to a halt.
|
28 October 2011, 06:11 AM | #11 |
"TRF" Member
Join Date: Apr 2009
Real Name: Jeremy
Location: Louisiana
Watch: Rolex
Posts: 2,732
|
+1
__________________
As a man is, so he sees. As the eye is formed, such are its powers. William Blake |
28 October 2011, 04:38 AM | #12 |
"TRF" Member
Join Date: Mar 2011
Real Name: Mark
Location: Bonny Scotland
Watch: 14060M Sub (cosc)
Posts: 5,280
|
Personally, I'd just get it pressure tested and, if that was ok, leave well alone.
Just my opinion but I wouldn't mess with it and I wouldn't let them polish my watch even if it did go for service...
__________________
Don't mind me. I'm full of scotch, bitterness and impure thoughts! "You have enemies? Good! That means you stood up for something, sometime in your life." Sir Winston Leonard Spencer-Churchill KG, OM, CH, TD, PC, DL, FRS. |
28 October 2011, 04:42 AM | #13 |
"TRF" Member
Join Date: Jan 2011
Real Name: Kris
Location: Washington, DC
Posts: 205
|
|
28 October 2011, 05:12 PM | #14 | |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 53,063
|
Quote:
And why ever not there is nothing special with a sub with lug holes and a SEL there must be quite a few thousand around.And a normal routine service and polish will do no harm whatsoever.
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder |
|
28 October 2011, 05:26 PM | #15 | |
"TRF" Member
Join Date: Jan 2011
Real Name: gus
Location: East Coast
Watch: APK & sometimes Y
Posts: 26,601
|
Quote:
especially models with the polished bits, they will have to develop that nice patina all over again.
__________________
|
|
28 October 2011, 06:33 PM | #16 |
"TRF" Life Patron
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 53,063
|
Well now all the Rolex polishing machines are being standardised at all RCS and watch should come back as original factory spec, as long as there were only normal light every day scratches etc.And just cannot understand how any patina can apply to the polished bits.If its showing like you say patina on the polished bits its not patina but simply dirt or some sort of sweat chemical stain etc, polished bits are meant to look polished and shiny.
__________________
ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder |
29 October 2011, 03:52 AM | #17 | |
"TRF" Member
Join Date: Jan 2011
Real Name: Kris
Location: Washington, DC
Posts: 205
|
Quote:
As far as polishing, I would not want it done to my watch. Removes character, and metal. But to each their own. |
|
28 October 2011, 04:47 AM | #18 |
"TRF" Member
Join Date: Dec 2009
Real Name: Genaro
Location: Fresno Ca.
Watch: R O L E X
Posts: 4,466
|
I would have it serviced. It has been good to you so return the favor.
|
28 October 2011, 04:47 AM | #19 |
"TRF" Member
Join Date: Nov 2009
Real Name: Andreas
Location: Margaritaville
Watch: Smurf
Posts: 19,879
|
I would have it serviced, for the reason Tools explained. Will eventually get expensive.
__________________
Yeah, well, you know, that's just, like, your opinion, man. |
28 October 2011, 04:50 AM | #20 |
"TRF" Member
Join Date: May 2009
Location: UK
Posts: 1,543
|
I wouldn't bother unless you notice a drop in performance.
|
28 October 2011, 12:29 PM | #21 |
"TRF" Member
Join Date: Dec 2010
Real Name: Joey
Location: around the Bay
Watch: ing TRF
Posts: 1,942
|
|
28 October 2011, 04:50 AM | #22 |
2024 SubLV41 Pledge Member
Join Date: Jul 2009
Location: Cave
Watch: Sundial
Posts: 33,940
|
It's kind of like a colonoscopy. Good to have done regularly to catch issues vs having it done because of an issue. Having said that, I'll punch the physician who tries to shove a camera up my butt.
|
28 October 2011, 04:52 AM | #23 |
"TRF" Member
Join Date: Sep 2011
Location: So. California
Posts: 1,232
|
Get the watch serviced and protect your investment.
|
28 October 2011, 04:52 AM | #24 |
"TRF" Member
Join Date: Mar 2010
Real Name: MJC
Location: PHL USA
Watch: IWC, Rolex, AP
Posts: 29,232
|
Yeah, I would. $800 for 11 years of wear is a bargain IMO.
__________________
|
28 October 2011, 05:07 AM | #25 |
"TRF" Member
Join Date: Apr 2010
Real Name: J
Location: The great Midwest
Watch: youlookinat?
Posts: 2,369
|
Its akin to running synthetic oil in your car. You can get 25,000 miles off of one oil change if you want.....but after the first 10k miles, the metal components are wearing quicker due to the oil getting dirtier/breaking down.
It would behoove you to perform a service on it. |
28 October 2011, 05:07 AM | #26 |
"TRF" Member
Join Date: Jun 2009
Location: VA
Posts: 965
|
Two of the 3 that i bought were preowned. N (1991) and F (2003). N was checked out and serviced prior to buying. The F will be 8 yrs and not serviced yet.
__________________
326933 SkyDweller, 126711 GMT II CHNR 12600 DeepSea Seadweller 14060 No Date Submariner 16710 GMT II Pepsi N-Series, Coke F Series |
28 October 2011, 05:14 AM | #27 |
"TRF" Member
Join Date: Dec 2010
Location: Florida
Watch: Rolex Datejust
Posts: 32
|
This is an excellent question. I've had my Datejust since I bought it new in 1990, worn it continously, and it's never been serviced or had anything done to it. I might add it runs great.
I had an AD who had been in business over 50 years tell me, "If ain't broke, don't fix it." I decided to follow his advice, and haven't had any problems yet. On the other hand, there is another AD in town and the reaction was like the one you got. Service it every five years or so to keep it lubricated. That makes sense. I could have bought a new one for all the money I've saved not having it serviced. I don't really know the answer to this question. I also believe "if anything can go wrong it will go wrong," so I'm sort of afraid to send it to Rolex for fear it will get lost, it will not run as good when I get it back, it will get scratched, etc. I was interested in this post to see what others said, and I see there are mixed opinions on it. I had an Osterdate before my Datejust that my Dad bought in Vietnam in 1963 (and years later he gave it to me). It was never serviced until eventually the winding stem broke (it was a manual wind), and I sent it to Rolex and they repaired it. But it ran for like 25+ years without a problem. BTW, it cost $93 as I recall in the PX in Saigon. I'm sort of inclined not to service it until there's a problem, but that's just been my experience. Robert |
28 October 2011, 11:55 AM | #28 | |
Member
Join Date: May 2011
Location: Colorado
Watch: SubC LV & 16600
Posts: 229
|
Quote:
|
|
28 October 2011, 05:22 AM | #29 |
Banned
Join Date: Aug 2011
Real Name: Mickey®
Location: Atlanta, GA
Watch: Swiss Made
Posts: 5,801
|
At this point leave it alone...
The whole 5 years +/- is preventative and at this point "IF" there was any damage it is already done. I will send mine to Rolex. I've seen good work and bad by independents and "heard" of bad RSC work too. BUT I've also heard more horror stories with independents (used parts, not genuine parts, gone out of business, regulated and oiled and not even overhauled!!!). |
28 October 2011, 05:22 AM | #30 |
"TRF" Member
Join Date: Feb 2008
Location: NJ
Watch: Daytona
Posts: 188
|
Personally, I'd just get it pressure tested and, if that was ok, leave well alone.
Just my opinion but I wouldn't mess with it and I wouldn't let them polish my watch even if it did go for service... __________________ X2 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.