Best Rolex grade polish?

[Eric88]

I have an old Rolex that is perfect, but was thinking about a fresh finish to the case. I would like it as close to Rolex specs as possible. Recommendations?

[dddrees]

Bob Ridley possibly.

I imagine he does a good job.

[cruvon]

Have heard RSC Bexley, UK, does the best polish but you might have to do a movement service with them too!

[jedly1]

the best polish is Rolex UK or Rolex Geneva who have the full lapping machine set up and dedicated department that just polish.

When i was in the UK many people (mostly Americans) used to send over their pieces for UK service to achieve the 'bexley edge' ...and to this day it still commands a certain prescence and sells a watch pretty quick ..even with the unpolished hype...



c

[CaveDiver]

Originally Posted by jedly1

the best polish is Rolex UK or Rolex Geneva who have the full lapping machine set up and dedicated department that just polish.

When i was in the UK many people (mostly Americans) used to send over their pieces for UK service to achieve the 'bexley edge' ...and to this day it still commands a certain prescence and sells a watch pretty quick ..even with the unpolished hype...



c

Can you tell us a little more about the mystery machine hiding in the US. Thanks. CD

[jedly1]

Originally Posted by CaveDiver

Can you tell us a little more about the mystery machine hiding in the US. Thanks. CD

nope...nor did i say there WAS a machine in the US....

[CaveDiver]

Originally Posted by jedly1

nope...nor did i say there WAS a machine in the US....

Thanks Jed..
In the recent thread you did not say machine. However, past conversations you mentioned that there were only two places that can recreate NOS bevel/chamfer. Both those places being Rolex service centers that have the lapping machines. Sorry for my inference that someone in the USA had one of the machines which I thought was required to get to NOS specifications.
CD.

[Eric88]

Thanks, does anyone have advice on sending a watch to Rolex UK from the USA? And what is this "bexley edge?"

[Z-Sub]

I believe it's referring to the chamfer of the lugs.

[Puffy]

Originally Posted by Eric88

And what is this "bexley edge?"

here is the bexley edge...

an old GMT of mine, 16710 MK1, that rolex bexley serviced last year.

it was beaten to a pulp, been dragged through cliffs, deserts, sea, sand, fire, forests and mountains from africa to australia, case full of nicks and dents and chamfers were soft as a mouse's ear

see the last picts comparing it to one of my unpolished and mint GMTs. can't really tell the difference

with the new machines at bexley, they scrape off a small layer and the machine then gives it the factory finish

i spoke to the master polisher himself who said the beaten up GMT had had its case restored to 90% factory finish

[dddrees]

Originally Posted by Puffy

here is the bexley edge...

an old GMT of mine, 16710 MK1, that rolex bexley serviced last year.

it was beaten to a pulp, been dragged through cliffs, deserts, sea, sand, fire, forests and mountains from africa to australia, case full of nicks and dents

see the last picts comparing it to one of my unpolished and mint GMTs. can't really tell the difference

with the new machines at bexley, they scrape off a small layer and the machine then gives it the factory finish

i spoke to the master polisher himself who said the beaten up GMT had had its case restored to 90% factory finish

Great looking watch Anders.

[Puffy]

Originally Posted by dddrees

Great looking watch Anders.

beauty of a job for sure

[Orchi]

Originally Posted by Puffy

here is the bexley edge...

an old GMT of mine, 16710 MK1, that rolex bexley serviced last year.

it was beaten to a pulp, been dragged through cliffs, deserts, sea, sand, fire, forests and mountains from africa to australia, case full of nicks and dents and chamfers were soft as a mouse's ear

see the last picts comparing it to one of my unpolished and mint GMTs. can't really tell the difference

with the new machines at bexley, they scrape off a small layer and the machine then gives it the factory finish

i spoke to the master polisher himself who said the beaten up GMT had had its case restored to 90% factory finish

Err Buddy Puffy...great looking GMTs you got there...
n very beautifully restored by Rolex UK...

Just for comparison sakes...
here is a 16760 "Fatlady"...
one which Orchi believes has the original factory's...
asymmetrical case chamfer/bevel...n sharper edges...

[Robbyvm]

i say don't get your your vintage Rolex polished ... everything you take of is lost forever...

[jedly1]

Originally Posted by Robbyvm

i say don't get your your vintage Rolex polished ... everything you take of is lost forever...

It depends .... For very many collectors old watches don't need to look old and beat up , for many a lot of the watches you see posted in the 'forum' environment just look 'tatty' ....the majority of collectors aren't in the Internet world , and believe it ir not the majority of those you come across expect a watch to be nicely polished and well presented ....

if it's a rare watch with historical significance I personally like them beat up and carrying their history on display ... For your bog standard 5513 that's been worn as a desk diver for 40 years I'd much rather have sharpened up than beat up and dulled ....but that's me , everyone is different !!

[Keeperoftime]

Originally Posted by jedly1

It depends .... For very many collectors old watches don't need to look old and beat up , for many a lot of the watches you see posted in the 'forum' environment just look 'tatty' ....the majority of collectors aren't in the Internet world , and believe it ir not the majority of those you come across expect a watch to be nicely polished and well presented ....

if it's a rare watch with historical significance I personally like them beat up and carrying their history on display ... For your bog standard 5513 that's been worn as a desk diver for 40 years I'd much rather have sharpened up than beat up and dulled ....but that's me , everyone is different !!

+1

[Robbyvm]

"old and beat up" is no must for me either but this doesn't always mean it needs an intensive polish right...
degustibus et coloribus non discputandum est....

[jedly1]

Again depends ... It's my experience that Rolex will take as little metal as possible and often that doesn't need to be intense ... But to make the case as intended by Rolex it should have a high gloss flattened sides, very shiny highly polished chamfer and beautifully brushed top and bottom of lug ... This can be achieved with minimal intensity if the case is free of big gouges and dents to start ...

[jedly1]

Ps. One other advantage of a nicely polished watch .... Wives like them more and give you less grief for wasting money :-) ...

.... Trust me it's an empirical study I have been conducting for many years :-)

[dddrees]

Although I would be concerned about sending it to the UK I think I would take some precautions about it's return shipment to the USA. I would make sure it will make it back thru customs in the states without a hitch. I know it's your watch but customs have been known to confiscate Rolex watches entering the US, so I would want to take the proper precautions whatever those are.

[Submarino]

If I had not seen it side by side I would've thought the one on the left had never been polished and it was an NOS. superb polishing job!!!

[Puffy]

Originally Posted by Submarino

If I had not seen it side by side I would've thought the one on the left had never been polished and it was an NOS. superb polishing job!!!

yeah they do a great job now that it's all done my an expensive machine that very very increased service costs are paying for !!

comparing side by side, to the naked eye there was no difference in luster, satin finish or edges between the two GMTs

took them about three months to service my beater GMT

[jedly1]

Originally Posted by Puffy

yeah they do a great job now that it's all done my an expensive machine that very very increased service costs are paying for !!

comparing side by side, to the naked eye there was no difference in luster, satin finish or edges between the two GMTs

took them about three months to service my beater GMT

now before all the latest hype ...that was the top of the tree in terms of collecting ...outside of NOS...because if you were lucky enough to turn up a worn but 'unpolished'/or full fat case...the real aim for a collection piece was to turn it into that.....

[Puffy]

Originally Posted by Eric88

Thanks everyone and Jed's comments about why to polish are aligned with mine. I still need to figure out if it makes sense for me to ship mine to the UK for the bexley edge or keep looking for someone that can do it in the USA.

Thanks for the photos. One of my Rolex has the bexley edge and I'd like to get it on the other one.

Originally Posted by jedly1

now before all the latest hype ...that was the top of the tree in terms of collecting ...outside of NOS...because if you were lucky enough to turn up a worn but 'unpolished'/or full fat case...the real aim for a collection piece was to turn it into that.....

if you have a vintage piece and it's a bit dull and sad to look at, have it fixed up. some of these old 'unpolished' cases out there really deserves to be brought back to the luster they deserve

i should have taken some before pics of the gmt but trust me when i say the case was a mess. massive dings, chamfers and lugs like warm butter etc

personally no issues for me with a bit of polishing as long as the case is beefy enough to take it

[Eric88]

Thanks everyone and Jed's comments about why to polish are aligned with mine. I still need to figure out if it makes sense for me to ship mine to the UK for the bexley edge or keep looking for someone that can do it in the USA.

Thanks for the photos. One of my Rolex has the bexley edge and I'd like to get it on the other one.

[Rikki]

If it helps I have a lapping machine and know how to use it those that have seen my work know this. Rikki

[CaveDiver]

Originally Posted by Rikki

If it helps I have a lapping machine and know how to use it those that have seen my work know this. Rikki

Hi Rik. Have any examples to share?

[cruvon]

Originally Posted by Rikki

If it helps I have a lapping machine and know how to use it those that have seen my work know this. Rikki

How difficult is it to get the same lapping machine brand as the one Rolex uses? If not possible, how do the different types of lapping machines differ and how difficult is it to get a "Bexley edge" type finish using lapping machines available on the market today?

[jedly1]

Originally Posted by cruvon

How difficult is it to get the same lapping machine brand as the one Rolex uses? If not possible, how do the different types of lapping machines differ and how difficult is it to get a "Bexley edge" type finish using lapping machines available on the market today?

weirdly just left my watchmaker who said same thing, the company who manufacture for rolex do sell others , he was looking into a while ago but cost was pretty damned high (mid 20k's gbp) for a machine with rolex like capabilities ...

[cruvon]

Originally Posted by jedly1

weirdly just left my watchmaker who said same thing, the company who manufacture for rolex do sell others , he was looking into a while ago but cost was pretty damned high (mid 20k's gbp) for a machine with rolex like capabilities ...

Thanks Jed, some telepathy there:). Any idea if those machines are watch brand specific or can be used for polishing across watch brands? If could be used for any watch brand, I guess it wouldn't be that difficult for someone specializing in watch polishing to recoup the money invested in a Rolex like capability machine and do well?