My Jubilee is a bit big.

[Johnny H]

Hi guys.

My wife brought me a lovely DJ with a Jubilee bracelet but its a bit big and I don't like the way it moves about

I was just wondering how easy it is to take out the links?

Was going to pop in there and ask but don't want them to say it a big job and cost me ££££ for a small job.

Can anyone help me please?

Thanks for your time.
Johnny

[Grey.Coupe]

If the buckle is at its smallest, the job of reducing the size of the bracelet is no big deal. Some loc-tite thread sealant is good to have to prevent loosening after you back out the screws, remove a link or two and snug it back up.

[Johnny H]

Originally Posted by Grey.Coupe

If the buckle is at its smallest, the job of reducing the size of the bracelet is no big deal. Some loc-tite thread sealant is good to have to prevent loosening after you back out the screws, remove a link or two and snug it back up.

Thanks mate.
I think the buckle is at its biggest

That would be easier to change?

[Rolexwatch]

First try using the micro adjustment on the buckle. If that isn't enough, take one link out of the 6 side.

[JP Chestnut]

This is a 10 minute job for a competent service person. There's no reason to risk stripping your screw heads doing it yourself. I would be surprised if someone charged you more than 20 USD to do the job.

[mjclark32]

Originally Posted by rolexwatch

first try using the micro adjustment on the buckle. If that isn't enough, take one link out of the 6 side.

x2

[Johnny H]

Originally Posted by Rolexwatch

First try using the micro adjustment on the buckle. If that isn't enough, take one link out of the 6 side.

Is that something I should try or take it to a shop mate?

[Johnny H]

Originally Posted by Rolexwatch

First try using the micro adjustment on the buckle. If that isn't enough, take one link out of the 6 side.

I take it that is the holes in the buckle?
Sorry if I sound silly, just want to get this right

[mmmk604]

Originally Posted by Johnny H

I take it that is the holes in the buckle?
Sorry if I sound silly, just want to get this right

There are 7 micro adjustment holes on the clasp. Right now it's at the biggest setting.

To move the spring bar, use a needle, paperclip, springbar removal tool, etc.

Shouldn't take you more than 30 seconds to do.

[Sous]

Originally Posted by mmmk604

There are 7 micro adjustment holes on the clasp. Right now it's at the biggest setting.
To move the spring bar, use a needle, paperclip, springbar removal tool, etc.
Shouldn't take you more than 30 seconds to do.

I'd add to this by suggesting a toothpick. They're cheap and won't damage the metal.

Gorgeous watch, Johnny H! Congrats

[Tools]

Careful though..

Once you get the spring out of the hole, if you move it outside the clasp it will shoot off like a rocket....

[Annan]

Yes....very easy to move the spring bar in the clasp. As already said, I use a toothpick. Take care too that it doesn't fly across the room and get lost. I usually try to hold the watch low over a large, soft surface and have found my bed works well for that purpose. From your pics it looks like you might be able to adjust the clasp sufficiently without having to remove any links. It all depends on how the clasp centers on your wrist and your personal preferences.

[Johnny H]

Thank you guys.
I knew this was the right forum to join :)

All done and feeling great :)

Thanks again
Johnny

[mmmk604]

Originally Posted by Johnny H

Thank you guys.
I knew this was the right forum to join :)

All done and feeling great :)

Thanks again
Johnny
Attachment 381419

Now it appears to be a perfect fit!
PS. I wear mine a tad bit looser, but only because the weather's getting hot!

[Johnny H]

Originally Posted by Sous

I'd add to this by suggesting a toothpick. They're cheap and won't damage the metal.

Gorgeous watch, Johnny H! Congrats

Toothpick was the tool of the day.

And thanks it is gorgeous and I love it :)

[landroverking]

I like to be able to put my little finger thru the bracelet or strap on any watch.

[jlc123]

I love the micro adjustment system on Rolex's, so easy!

[George Ab]

Nice job Johnny. I usually like to remove as many links as possible and use the the first or second most outside clasp hole vice keeping more links inside the clasp. I see that is exactly what you have done. If you have a few links inside the clasp, they tend to get worn over time from being up against the clasp.