ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

bayerische · 28 May 2013, 06:05 PM

Hi guys,

so last night I was timing some pasta with my RO chrono, when I suddenly noticed the reset pusher felt a bit loose.

I inspected it, and noticed that it was indeed very loose. Trying to screw the lock back in, the pusher fell off!

I was lucky it fell off on the kitchen table, and not on the road somewhere, as it's the WG model.

Well anyway, I noticed the pusher seems to be fastened by "force", and I pusher it back in and it said "snap", and now it looks like it's secure again.

Has this happened to any of you? Could it be over tightening of the lock screw pushing the push-buttons out of their "sockets"?

It does seem secure now, and the little spring was intact, and I could see any sort of damage, but this thing did freak me out a bit... Would have been pretty expensive to loose the push-button.

MonBK · 28 May 2013, 06:21 PM

Sorry to hear buddy.

It's obviously not built as well as a Rolex.

bayerische · 28 May 2013, 08:47 PM

Quote:

Originally Posted by MonBK

Sorry to hear buddy.

It's obviously not built as well as a Rolex.

Thanks!

That's what my wife said too!

So when can I expect you over?

MonBK · 28 May 2013, 10:42 PM

Quote:

Originally Posted by bayerische

Thanks!

That's what my wife said too!

So when can I expect you over?

I'm taking off on a Europe road trip next week but as soon as I'm back I'll pop over.

bayerische · 29 May 2013, 05:38 PM

Quote:

Originally Posted by MonBK

I'm taking off on a Europe road trip next week but as soon as I'm back I'll pop over.

Sounds good! Bring the gang.

dpkong · 29 May 2013, 02:34 AM

Quote:

Originally Posted by MonBK

Sorry to hear buddy.

It's obviously not built as well as a Rolex.

Don't think they're as tough as we think...

bayerische · 29 May 2013, 05:37 PM

Quote:

Originally Posted by dpkong

Don't think they're as tough as we think...

Pretty much what my AP looked like. It seems fine now though, I'll have it checked out at some point.

travisb · 28 May 2013, 07:28 PM

Yikes! Glad you didn't lose the piece.
I'd have it checked out to be on the safe side.

Sherwooddavid · 28 May 2013, 09:48 PM

Quote:

Originally Posted by travisb

Yikes! Glad you didn't lose the piece.
I'd have it checked out to be on the safe side.

diver2012 · 28 May 2013, 07:38 PM

Definitely have it checked out.

Hairdude1 · 29 May 2013, 05:32 AM

If that happened to me I would have a heart attack. Glad you found the pusher.

steveclocks · 29 May 2013, 05:58 AM

Quote:

Originally Posted by Hairdude1

If that happened to me I would have a heart attack. Glad you found the pusher.

X 2
Have it checked, just to be sure you don't have to worry about it anymore !
I like the thought of you using the chrono to cook! Watches are made to be used.

bayerische · 29 May 2013, 05:37 PM

Quote:

Originally Posted by Hairdude1

If that happened to me I would have a heart attack. Glad you found the pusher.

I might have too... But thankfully I had half a bottle of wine in my blood when it happened.

h999r · 29 May 2013, 06:05 AM

AP weakness. Crown / pushers.

28 May 2013, 06:05 PM	#1
bayerische "TRF" Member Join Date: Nov 2009 Real Name: Andreas Location: Margaritaville Watch: Smurf Posts: 19,879	Chrono pusher fell off... Hi guys, so last night I was timing some pasta with my RO chrono, when I suddenly noticed the reset pusher felt a bit loose. I inspected it, and noticed that it was indeed very loose. Trying to screw the lock back in, the pusher fell off! I was lucky it fell off on the kitchen table, and not on the road somewhere, as it's the WG model. Well anyway, I noticed the pusher seems to be fastened by "force", and I pusher it back in and it said "snap", and now it looks like it's secure again. Has this happened to any of you? Could it be over tightening of the lock screw pushing the push-buttons out of their "sockets"? It does seem secure now, and the little spring was intact, and I could see any sort of damage, but this thing did freak me out a bit... Would have been pretty expensive to loose the push-button. __________________ Yeah, well, you know, that's just, like, your opinion, man.

28 May 2013, 06:21 PM	#2
MonBK Banned Join Date: Nov 2010 Location: Kingstown Posts: 58,279	Sorry to hear buddy. It's obviously not built as well as a Rolex.

28 May 2013, 07:28 PM	#8
travisb 2024 SubLV41 Pledge Member Join Date: Aug 2009 Real Name: Travis Location: FL / NYC Watch: Yes.. Posts: 33,493	Yikes! Glad you didn't lose the piece. I'd have it checked out to be on the safe side.

28 May 2013, 07:38 PM	#10
diver2012 "TRF" Member Join Date: Feb 2013 Location: N/A Watch: N/A Posts: 1,373	Definitely have it checked out.

29 May 2013, 05:32 AM	#11
Hairdude1 "TRF" Member Join Date: Apr 2012 Real Name: Alex Location: Chicago Watch: AP,PP, Rolex Posts: 37,156	If that happened to me I would have a heart attack. Glad you found the pusher.

29 May 2013, 06:05 AM	#14
h999r Banned Join Date: May 2011 Real Name: HR Location: Planet Earth Watch: -ing Barts. Posts: 4,244	AP weakness. Crown / pushers.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)