ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Golden Ellipse · 13 July 2014, 02:13 AM

So, after a bunch of headache getting this to fit, I finally got my RubberB onto the 114270 today. Looks and feels pretty nice.

Word of guidance if you're going to try this -- dig through your 20mm pin connection and find some skinny ones -- the OEM ones are too thick to allow everything to fit.

Check out the final photos below:

joe100 · 13 July 2014, 02:39 AM

Looks nice. Wish they offered a factory option

Alfredo. · 13 July 2014, 02:40 AM

Looks very sharp!

sea-dweller · 13 July 2014, 03:17 AM

Looks great!

cop414 · 13 July 2014, 04:14 AM

Looks like OEM, very nice!

The Libertine · 13 July 2014, 04:48 AM

Strap works well with the dial. Nice change-up.

importstunna · 1 June 2018, 10:48 PM

Quote:

Originally Posted by Golden Ellipse

So, after a bunch of headache getting this to fit, I finally got my RubberB onto the 114270 today. Looks and feels pretty nice.

Word of guidance if you're going to try this -- dig through your 20mm pin connection and find some skinny ones -- the OEM ones are too thick to allow everything to fit.

Check out the final photos below:

Sorry to dig up this old thread but the OPs PM inbox is full. I am in the market for a Rubber B for my 114270 but realized they don’t make an exact fit for it. Can anyone provide some detailed information on how this was possible? I’ve only encountered 2-3 folks on the forum and have PMed all. Any information anyone can provide will help me. I tried the strap on today bc the store owner had it on his DaytonaC and was amazed but the fit and quality, now I have to get one. Thank you in advance!

alex_moreno111 · 1 June 2018, 11:05 PM

Are you sure they don't make it? Give them a call. They've always been very helpful to me. Would these fit? Good Luck!

https://rubberb.com/en/rolex-watch-b...ct-series=show

Quote:

Originally Posted by importstunna

Sorry to dig up this old thread but the OPs PM inbox is full. I am in the market for a Rubber B for my 114270 but realized they don’t make an exact fit for it. Can anyone provide some detailed information on how this was possible? I’ve only encountered 2-3 folks on the forum and have PMed all. Any information anyone can provide will help me. I tried the strap on today bc the store owner had it on his DaytonaC and was amazed but the fit and quality, now I have to get one. Thank you in advance!

importstunna · 1 June 2018, 11:22 PM

I read in a few places that it’s due to the spring bar sizing and/or position of the 114270 vs 214270 which causes it harder to fit. It’s also not listed in any of their reference documents plus the AD for the straps also mentioned they weren’t sure. I’ll definitely call them but traveling at the moment so I turned here first :).

alex_moreno111 · 1 June 2018, 11:39 PM

Interesting I was not aware of that. I don't own an Explorer but always cool to learn new things! good luck on your search man!

Quote:

Originally Posted by importstunna

I read in a few places that it’s due to the spring bar sizing and/or position of the 114270 vs 214270 which causes it harder to fit. It’s also not listed in any of their reference documents plus the AD for the straps also mentioned they weren’t sure. I’ll definitely call them but traveling at the moment so I turned here first :).

GarbanzoNegro · 2 June 2018, 06:20 AM

I emailed them once asking about a strap for the 114270 and they mentioned that, at this point, did not have a specific reference for it. They forwarded me to a blog where someone managed to adapt another reference (don't remember which reference or the website) to fit the 114260.

importstunna · 2 June 2018, 11:09 AM

Quote:

Originally Posted by GarbanzoNegro

I emailed them once asking about a strap for the 114270 and they mentioned that, at this point, did not have a specific reference for it. They forwarded me to a blog where someone managed to adapt another reference (don't remember which reference or the website) to fit the 114260.

So I emailed them yesterday and they said they don’t have a plan to make one for the 36mm Explorers. However, they said many of their clients have managed to fit the straps from the 39mm version onto the 36mm with 1.8 width spring bars. I believe that’s the standard sizing for 36mm Explorers, but unsure if I should try it since it won’t be a perfect fit?

Any additional thoughts anyone? Thanks!

13 July 2014, 02:13 AM	#1
Golden Ellipse 2024 Pledge Member Join Date: Jul 2010 Location: Family first Posts: 652	114270 Explorer on RubberB So, after a bunch of headache getting this to fit, I finally got my RubberB onto the 114270 today. Looks and feels pretty nice. Word of guidance if you're going to try this -- dig through your 20mm pin connection and find some skinny ones -- the OEM ones are too thick to allow everything to fit. Check out the final photos below:

13 July 2014, 02:39 AM	#2
joe100 2024 SubLV41 Pledge Member Join Date: Nov 2007 Real Name: Joe Location: New Mexico Watch: Explorer Posts: 12,840	Looks nice. Wish they offered a factory option __________________ It's Espresso, not Expresso. Coffee is not a train in Italy. -TRF Member 6982-

13 July 2014, 02:40 AM	#3
Alfredo. "TRF" Member Join Date: May 2014 Location: Margaritaville Posts: 3,639	Looks very sharp! __________________ After reading all posts, I agree with Adam!

13 July 2014, 04:14 AM	#5
cop414 TRF Moderator & 2024 SubLV41 Patron Join Date: Apr 2012 Real Name: Tim Location: Pennsylvania Watch: 14060M Posts: 72,261	Looks like OEM, very nice! __________________ Rolex Submariner 14060M Omega Seamaster 2254.50 DOXA Professional 1200T Card carrying member of TRF's Global Association of Retro-Grouch-Curmudgeons TRF's "After Dark" Bar & NightClub Patron P Club Member #17 2 FA ENABLED

13 July 2014, 03:17 AM	#4
sea-dweller "TRF" Member Join Date: Oct 2007 Real Name: Dennis Location: Bay Area - 925 Posts: 40,018	Looks great!

13 July 2014, 04:48 AM	#6
The Libertine Banned Join Date: May 2014 Real Name: Mike Location: BOS Watch: 16710;14060;214270 Posts: 6,375	Strap works well with the dial. Nice change-up.

1 June 2018, 11:22 PM	#9
importstunna "TRF" Member Join Date: Nov 2012 Location: World Watch: BLNR Posts: 855	I read in a few places that it’s due to the spring bar sizing and/or position of the 114270 vs 214270 which causes it harder to fit. It’s also not listed in any of their reference documents plus the AD for the straps also mentioned they weren’t sure. I’ll definitely call them but traveling at the moment so I turned here first :).

2 June 2018, 06:20 AM	#11
GarbanzoNegro "TRF" Member Join Date: Sep 2017 Location: Europe Posts: 448	I emailed them once asking about a strap for the 114270 and they mentioned that, at this point, did not have a specific reference for it. They forwarded me to a blog where someone managed to adapt another reference (don't remember which reference or the website) to fit the 114260.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)