ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

GUICAMPA · 8 September 2014, 01:43 AM

Hi all, I've seen another thread with a pic of a rgrc without the rubber coating and it looks amazing!

My bezel isn't in greta shape and I tought I could do that. Does anyone know how to do it?

Tks

Enviado do meu iPhone usando Tapatalk

kilyung · 8 September 2014, 03:36 AM

You have to take the bezel off to do it properly. Soak in an organic solvent in a well ventilated area and then peel off. Gasoline or methylene chloride should work fine.

diver2012 · 8 September 2014, 06:55 AM

Quote:

Originally Posted by kilyung

You have to take the bezel off to do it properly. Soak in an organic solvent in a well ventilated area and then peel off. Gasoline or methylene chloride should work fine.

Walter White...is that you?

GB-man · 8 September 2014, 10:43 AM

Quote:

Originally Posted by diver2012

Walter White...is that you?

I wouldn't do it! Get it repaired by AP.

watchdog507 · 8 September 2014, 12:46 PM

I have seen this done. You can tell by the dial colour. Certain dials only come on rubberclads. The dealers selling them probably know that anyone who knows AP's will not buy the watch. It's usually done to cut the cost of the replacement and repair by AP.

Travelair007 · 10 September 2014, 07:00 AM

Quote:

Originally Posted by diver2012

Walter White...is that you?

kilyung · 11 September 2014, 06:31 AM

Quote:

Originally Posted by diver2012

Walter White...is that you?

Chemistry is, well technically, chemistry is the study of matter. But I prefer to see it as the study of change.

subtona · 8 September 2014, 03:51 AM

Sounds interesting... Pics?

GUICAMPA · 8 September 2014, 05:57 AM

Does anybody have a picture of the bezel after peeling the rubber off? How about more pics of the watch after the service?

Enviado do meu iPhone usando Tapatalk

AshAP · 10 September 2014, 06:48 AM

Quote:

Originally Posted by TomanoKu

My bezel isn't in greta shape and I tought I could do that. Does anyone know how to do it?

Tks

Enviado do meu iPhone usando Tapatalk

You could try burning it off or use a sharp blade. I won't be taking the rubber off mine.

kilyung · 11 September 2014, 06:29 AM

Quote:

Originally Posted by AshAP

You could try burning it off or use a sharp blade. I won't be taking the rubber off mine.

The rubber wraps around the entire bezel so it'll look bad without removing it from the entire bezel.

Willygallardo · 13 September 2014, 01:20 AM

I wouldn't do it the screw's won't be flush anymore..

8 September 2014, 01:43 AM	#1
GUICAMPA "TRF" Member Join Date: Dec 2012 Location: Watchland Posts: 209	Removing the rubber off the the Rubber Clad bezel Hi all, I've seen another thread with a pic of a rgrc without the rubber coating and it looks amazing! My bezel isn't in greta shape and I tought I could do that. Does anyone know how to do it? Tks Enviado do meu iPhone usando Tapatalk

8 September 2014, 03:51 AM	#8
subtona "TRF" Member Join Date: Jan 2011 Real Name: gus Location: East Coast Watch: APK & sometimes Y Posts: 26,596	Sounds interesting... Pics? __________________

8 September 2014, 03:36 AM	#2
kilyung 2024 SubLV41 Pledge Member Join Date: Jul 2009 Location: Cave Watch: Sundial Posts: 33,940	You have to take the bezel off to do it properly. Soak in an organic solvent in a well ventilated area and then peel off. Gasoline or methylene chloride should work fine.

8 September 2014, 12:46 PM	#5
watchdog507 "TRF" Member Join Date: Mar 2013 Location: YYZ, RSW Watch: Rose Gold Posts: 1,675	I have seen this done. You can tell by the dial colour. Certain dials only come on rubberclads. The dealers selling them probably know that anyone who knows AP's will not buy the watch. It's usually done to cut the cost of the replacement and repair by AP.

8 September 2014, 05:57 AM	#9
GUICAMPA "TRF" Member Join Date: Dec 2012 Location: Watchland Posts: 209	Does anybody have a picture of the bezel after peeling the rubber off? How about more pics of the watch after the service? Enviado do meu iPhone usando Tapatalk

13 September 2014, 01:20 AM	#12
Willygallardo "TRF" Member Join Date: Sep 2012 Real Name: Willy Location: Montreal Watch: AP's - Rolex Posts: 972	I wouldn't do it the screw's won't be flush anymore..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)