ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

SSDAYTONAHULK · 17 July 2015, 01:07 PM

I was walking back into my house and I hit the corner of the door with my watch...I was afraid to look down...I knew for sure it wasn't going to be pretty...The Pearl was completely missing....I sent it back to RSC and waiting their response....amazingly enough the bezel took the hit easy!!!!...not a single scratch...

Cdn328is · 17 July 2015, 01:16 PM

From that first picture, the pearl less look isn't all that bad! Maybe it's worse in person. Let us know if they can simply press another pearl back in or if the whole bezel needs to be replaced (and how much it costs!).

padi56 · 3 August 2015, 05:15 PM

Quote:

Originally Posted by Cdn328is

From that first picture, the pearl less look isn't all that bad! Maybe it's worse in person. Let us know if they can simply press another pearl back in or if the whole bezel needs to be replaced (and how much it costs!).

Yes now they can replace the pearl only Rolex have developed a special tool just for that purpose.

locutus49 · 17 July 2015, 01:21 PM

good deal.

drgoro · 17 July 2015, 01:24 PM

OUCH, sorry man.

sickened1 · 17 July 2015, 01:29 PM

Yes, please keep us posted. Hopefully they won't have replace the whole bezel since I've read somewhere on here that the ceramic bezel is pretty pricey.

SSDAYTONAHULK · 17 July 2015, 01:38 PM

I will def follow up....I actually have the watch insured with Jewelers Mutual, but haven't told them about the damage yet. Do you think I should? I have a zero deductible...Anyone have experience with them?

Galion · 17 July 2015, 01:48 PM

Mine looked the same after I hit a door knob a few weeks ago, you cant just press another pearl from Rolex, had to replace the whole ceramic bezel for $650 including labor.

Mr. K · 17 July 2015, 04:17 PM

Quote:

Originally Posted by Galion

Mine looked the same after I hit a door knob a few weeks ago, you cant just press another pearl from Rolex, had to replace the whole ceramic bezel for $650 including labor.

Ouch

SC11 · 17 July 2015, 04:42 PM

Quote:

Originally Posted by Galion

Mine looked the same after I hit a door knob a few weeks ago, you cant just press another pearl from Rolex, had to replace the whole ceramic bezel for $650 including labor.

That used to be the case but apparently now Rolex has a bezel pearl replacement tool for the ceramic models, I believe member Ironstark mentioned it in a previous post in the tech subsection.

zama · 17 July 2015, 04:55 PM

Quote:

Originally Posted by Galion

Mine looked the same after I hit a door knob a few weeks ago, you cant just press another pearl from Rolex, had to replace the whole ceramic bezel for $650 including labor.

I would be getting the super glue out if the the pearl was otherwise OK. That is a joke even by Rolex standards having to replace the bezel when one small component has popped off.

padi56 · 17 July 2015, 06:08 PM

Quote:

Originally Posted by Galion

Mine looked the same after I hit a door knob a few weeks ago, you cant just press another pearl from Rolex, had to replace the whole ceramic bezel for $650 including labor.

They now can fit just the pearl in the ceramic inserts Rolex have developed a tool for this purpose.

Brandon(phila) · 18 July 2015, 04:16 AM

Quote:

Originally Posted by padi56

They now can fit just the pearl in the ceramic inserts Rolex have developed a tool for this purpose.

Yeah...crazy glue

Fugu_88 · 22 May 2016, 12:54 AM

Quote:

Originally Posted by Galion

Mine looked the same after I hit a door knob a few weeks ago, you cant just press another pearl from Rolex, had to replace the whole ceramic bezel for $650 including labor.

Have to replace the whole stainless steel bezel or just the ceramic insert with the pearl..? If not wrong it's two portions, one is the bezel itself. The other is the pearl attached to the ceramic insert.

Ravager135 · 17 July 2015, 01:53 PM

Sorry to hear that. The pearl always seems to be the most delicate part of the bezel: aluminum or ceramic. Hope you get her back soon.

Speed · 17 July 2015, 02:03 PM

I'd be "pipped" off.

GB-man · 17 July 2015, 02:05 PM

Dang! Hope you get it back ASAP

Ritch99 · 17 July 2015, 02:16 PM

Damn, so sorry to hear that. I would have went off with all kinds of sentence enhancers. Hope you get it squared away asap.

Bangel · 17 July 2015, 02:58 PM

If it costs a lot to get fixed and you don't need the lume in the pip, I'd be tempted to leave as is. I don't think it looks that bad.

Rashid.bk · 17 July 2015, 04:13 PM

At this point Rolex should be able to get rid of the pearl altogether and use a recessed lume plot. My idea would be a lume triangle covered by a sapphire triangle recessed into the bezel, no more knocking off pips, and don't even say the sapphire can get broken....how many millions of watches have sapphire crystals with no issues in daily wear.

Colnago · 17 July 2015, 09:36 PM

Quote:

Originally Posted by Rashid.bk

At this point Rolex should be able to get rid of the pearl altogether and use a recessed lume plot. My idea would be a lume triangle covered by a sapphire triangle recessed into the bezel, no more knocking off pips, and don't even say the sapphire can get broken....how many millions of watches have sapphire crystals with no issues in daily wear.

That is a very good idea.....Pelagos lume (although not covered by sapphire) is like this......it would result in a clean looking bezel and no knocking off possibilities

DeeTee · 17 July 2015, 04:37 PM

My ceramic models have taken beatings and are ok, the SS insert one knocked off easy.

SC11 · 17 July 2015, 04:46 PM

Here we go

http://www.rolexforums.com/showthrea...21#post4844321

walds11 · 17 July 2015, 10:18 PM

Quote:

Originally Posted by SC11

Here we go

http://www.rolexforums.com/showthrea...21#post4844321

Yep, very informative thread!

QueueCumber · 17 July 2015, 04:46 PM

I don't know, might just want to buy a second watch to wear when the Hulk needs to go in for repair. Might as well get two new watches, since more than one might occasionally have to go in for repair at the same time. Heck, I say get three new watches just to be safe....

SSDAYTONAHULK · 17 July 2015, 09:30 PM

Quote:

Originally Posted by QueueCumber

I don't know, might just want to buy a second watch to wear when the Hulk needs to go in for repair. Might as well get two new watches, since more than one might occasionally have to go in for repair at the same time. Heck, I say get three new watches just to be safe....

Lucky for me I have a spare 😎

tomcorkery · 4 August 2015, 12:16 AM

Quote:

Originally Posted by QueueCumber

I don't know, might just want to buy a second watch to wear when the Hulk needs to go in for repair. Might as well get two new watches, since more than one might occasionally have to go in for repair at the same time. Heck, I say get three new watches just to be safe....

agree

aria · 17 July 2015, 04:46 PM

You people are so insensitive!
Nobody has even asked how the door is!

QueueCumber · 17 July 2015, 04:51 PM

Quote:

Originally Posted by aria

You people are so insensitive!
Nobody has even asked how the door is!

He's dead, Jim.

9*9*3 · 3 August 2015, 03:39 PM

Quote:

Originally Posted by QueueCumber

He's dead, Jim.

A sad lose too.

17 July 2015, 01:07 PM	#1
SSDAYTONAHULK "TRF" Member Join Date: Jun 2015 Real Name: KIRBY Location: USA Watch: Patek 5980/1A Posts: 132	The pearl fell off my Hulk! I was walking back into my house and I hit the corner of the door with my watch...I was afraid to look down...I knew for sure it wasn't going to be pretty...The Pearl was completely missing....I sent it back to RSC and waiting their response....amazingly enough the bezel took the hit easy!!!!...not a single scratch... Attached Images

17 July 2015, 04:46 PM	#25
QueueCumber "TRF" Member Join Date: Aug 2009 Real Name: Q Location: The Q Continuum Watch: ST:TNG Posts: 8,466	I don't know, might just want to buy a second watch to wear when the Hulk needs to go in for repair. Might as well get two new watches, since more than one might occasionally have to go in for repair at the same time. Heck, I say get three new watches just to be safe.... __________________ Instagram: _queuecumber_

17 July 2015, 01:16 PM	#2
Cdn328is Banned Join Date: Feb 2011 Location: Le French Canada Watch: 114060 Posts: 199	From that first picture, the pearl less look isn't all that bad! Maybe it's worse in person. Let us know if they can simply press another pearl back in or if the whole bezel needs to be replaced (and how much it costs!).

17 July 2015, 01:21 PM	#4
locutus49 Banned Join Date: May 2014 Real Name: John Location: La Jolla, CA Watch: Platona Posts: 12,194	good deal.

17 July 2015, 01:24 PM	#5
drgoro "TRF" Member Join Date: Mar 2014 Location: Virginia Posts: 816	OUCH, sorry man.

17 July 2015, 01:29 PM	#6
sickened1 2024 SubLV41 Pledge Member Join Date: Aug 2014 Real Name: Ed Location: SoCal Watch: ugiveiswatchuget Posts: 9,054	Yes, please keep us posted. Hopefully they won't have replace the whole bezel since I've read somewhere on here that the ceramic bezel is pretty pricey.

17 July 2015, 01:38 PM	#7
SSDAYTONAHULK "TRF" Member Join Date: Jun 2015 Real Name: KIRBY Location: USA Watch: Patek 5980/1A Posts: 132	I will def follow up....I actually have the watch insured with Jewelers Mutual, but haven't told them about the damage yet. Do you think I should? I have a zero deductible...Anyone have experience with them?

17 July 2015, 01:48 PM	#8
Galion "TRF" Member Join Date: May 2010 Location: PE - BR Posts: 558	Mine looked the same after I hit a door knob a few weeks ago, you cant just press another pearl from Rolex, had to replace the whole ceramic bezel for $650 including labor.

17 July 2015, 01:53 PM	#15
Ravager135 "TRF" Member Join Date: Apr 2012 Location: New Jersey Posts: 4,224	Sorry to hear that. The pearl always seems to be the most delicate part of the bezel: aluminum or ceramic. Hope you get her back soon.

17 July 2015, 02:03 PM	#16
Speed "TRF" Member Join Date: Aug 2009 Location: USA Posts: 19,706	I'd be "pipped" off.

17 July 2015, 02:05 PM	#17
GB-man 2024 SubLV41 Pledge Member Join Date: Nov 2012 Location: USA Watch: addiction issues Posts: 37,355	Dang! Hope you get it back ASAP

17 July 2015, 02:16 PM	#18
Ritch99 "TRF" Member Join Date: Nov 2014 Real Name: Mitch Location: CONUS Watch: DSSD and others Posts: 1,186	Damn, so sorry to hear that. I would have went off with all kinds of sentence enhancers. Hope you get it squared away asap.

17 July 2015, 02:58 PM	#19
Bangel "TRF" Member Join Date: Oct 2011 Location: Australia Watch: 116610LN Posts: 15,802	If it costs a lot to get fixed and you don't need the lume in the pip, I'd be tempted to leave as is. I don't think it looks that bad.

17 July 2015, 04:13 PM	#20
Rashid.bk "TRF" Member Join Date: Jan 2009 Location: Dallas Watch: 12800ft = 3900m Posts: 11,173	At this point Rolex should be able to get rid of the pearl altogether and use a recessed lume plot. My idea would be a lume triangle covered by a sapphire triangle recessed into the bezel, no more knocking off pips, and don't even say the sapphire can get broken....how many millions of watches have sapphire crystals with no issues in daily wear.

17 July 2015, 04:37 PM	#22
DeeTee "TRF" Member Join Date: Dec 2014 Location: Los Angeles Watch: Netflix Posts: 3,978	My ceramic models have taken beatings and are ok, the SS insert one knocked off easy.

17 July 2015, 04:46 PM	#23
SC11 Banned Join Date: Jul 2010 Real Name: Sam Location: UK Watch: AP ☠️ Posts: 6,151	Here we go http://www.rolexforums.com/showthrea...21#post4844321

17 July 2015, 04:46 PM	#28
aria Banned Join Date: Apr 2011 Real Name: Walter Location: Albuquerque Watch: DD,DJ,AK Posts: 342	You people are so insensitive! Nobody has even asked how the door is!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)