ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Land Dweller · 6 June 2008, 04:53 AM

Hi all,

For the life of me i can't see the etched crown on the crystal of my 2008 Datejust. Can anyone help?

Thanks in advance L.D.

Frampton · 6 June 2008, 05:03 AM

It is very hard to see without magnification. You need to use a loupe or magnifying glass.

SPACE-DWELLER · 6 June 2008, 05:17 AM

Take a small flashlight and light onto the crystal with it from the 12 towards the 6 o' clock position. This will make the laser etched coronet ("LEC") literally glow up.

Land Dweller · 7 June 2008, 03:34 AM

Cheers lads,

Someone has informed me that the latest Datejust's may not have the Laser etched crystal after all! surely not!

Rhorne · 7 June 2008, 03:36 AM

Mine is a D series and it has it.

perryj · 7 June 2008, 03:36 AM

I think it should.......

did you try the flashlight ?

Land Dweller · 7 June 2008, 03:42 AM

Thanks,

I'll dig my Flashlight out and have a look.

JJ Irani · 7 June 2008, 05:45 AM

Quote:

Originally Posted by Land Dweller

Hi all,

For the life of me i can't see the etched crown on the crystal of my 2008 Datejust. Can anyone help?

Thanks in advance L.D.

A great deal would depend on the colour of your dial. If it's a dark dial, then it's easy to view the etching using a 10x loupe and a table lamp.

If it's a light coloured dial, then it's very difficult. With my Platty, it's virtually impossible to catch the etching; but I can see it....barely.

With the black dial Subby, you can see it almost instantly!!

JJ

Land Dweller · 7 June 2008, 07:19 PM

I dont know weather this is reason to worry or not but my new Datejust shows no etched crown! be it under torchlight or natural light. It was bought from an AD. Would it be possible that for the 2008 model year that Rolex may well have dropped the etched crown on the Datejust and others, as the fakers can now replicate it?

L.D.

swatty · 7 June 2008, 07:39 PM

If you look from below the 6 with a jewelers loope , its there

perryj · 7 June 2008, 09:34 PM

Are you in a dark room and shining that flashlight through the side of the crystal? From 12 toward 6 ?

McGary911 · 7 June 2008, 10:54 PM

THis is a common topic, and really, some people just have difficulty seeing it. The flashlight method works very well. Also, it may be helpful if you look at it from a pretty acute angle.....not head on. Once you see it once, It'll be easy to find. Kind of like when your buddy points out a scratch on your car you never noticed, but now notice it EVERY time.......'cept nicer.

Sometimes i'll be in the car, waiting at a light with my hands on the wheel, and the sun will hit the edge of the crystal just right, and the coronet just about lights up. I can see it clearly from 3 feet away. That's a pretty nice way to start the day.....

mkultra · 8 June 2008, 04:12 AM

I have the same model 116200 Z series datejust and I found mine with bright sunlight. My dial is Rhodium Roman.

Land Dweller · 8 June 2008, 11:42 PM

Hmmm, no, the etched crown is not on my crystal at all, i have had two other people try to view it under the Flashlight and at angles etc etc. My watch is an M prefix 2008 Datejust. Maybe Rolex have dropped the crown so to speak, on non professional series watches..

L.D.

OYSTERMANN · 8 June 2008, 11:55 PM

Quote:

Originally Posted by Land Dweller

Hmmm, no, the etched crown is not on my crystal at all, i have had two other people try to view it under the Flashlight and at angles etc etc. My watch is an M prefix 2008 Datejust. Maybe Rolex have dropped the crown so to speak, on non professional series watches..

L.D.

I wouldn't worry about it - I've yet to see the etched crown on both my Date Just and Day-Date (bought last Sept and Dec and both brand new from an AD). They both have white dials.

I have, however, seen the etched crown on my new GMT IIc and when I did, it was an amazing moment

. JJ's right - it does show up a lot more clearly against a black dial. What did surprise me, though, was just how small it actually was. I was looking for something much bigger.

Rest assured that it will be there on yours, too - it's just that you've not seen it yet. If in doubt, I'm confident your AD will confirm it's there using his magnifying loupe and when he does, ask him to let you see it. You'll be able to sleep at night again

.

SPACE-DWELLER · 10 June 2008, 12:30 AM

Quote:

Originally Posted by Land Dweller

Hmmm, no, the etched crown is not on my crystal at all, i have had two other people try to view it under the Flashlight and at angles etc etc. My watch is an M prefix 2008 Datejust. Maybe Rolex have dropped the crown so to speak, on non professional series watches..

L.D.

Good call you finally found it!

BTW.: The ONLY current Rolex watch that does NOT have the LEC is the Milgauss GV (green edged crystal).

Land Dweller · 9 June 2008, 02:18 AM

Brilliant! I have just found the Laser Etched crown on the crystal of my Datejust, talk about microscopic! I found it by holding my watch into the sunset at about 45 degrees looking down from 12 to 6 on the dial "as advised earlier" and there it is, it seems much smaller than the crown etching on the Sub etc.
Thanks all for your advice.

Ps, give it a go Neil i'm sure you will see the same too.

OYSTERMANN · 9 June 2008, 02:56 AM

Quote:

Originally Posted by Land Dweller

Brilliant! I have just found the Laser Etched crown on the crystal of my Datejust, talk about microscopic! I found it by holding my watch into the sunset at about 45 degrees looking down from 12 to 6 on the dial "as advised earlier" and there it is, it seems much smaller than the crown etching on the Sub etc.
Thanks all for your advice.

Ps, give it a go Neil i'm sure you will see the same too.

Hey, fantastic - well done

.

From your post, I can tell you' re well pleased, too

.

I'll have to give it a whirl.

Now you know you've got the real thing, which is great. I did say it was small, didn't I

!!

polarinda · 14 August 2015, 12:03 AM

I just had a horrid time locating the lec on my 16200 silver dial d serial.

Trick...in a dark room...shine a torch from 3 oclock flush with the crystal and look from 6 oclock slightly at an angle of 30 degrees from plane of crystal.

Pops

BuddaLun · 14 August 2015, 01:43 AM

I have found that the flash on the iPhone (or the flashlight - same light source) is a perfect way to make the etched crown show up.

As seen here:
http://thegreengmthand.com/about/use...r_etched_crown

jhe888 · 14 August 2015, 01:56 AM

Shine a light at a shallow angle across the crystal. Move the light around a bit. It may be easier to see if you look at the crystal from a shallow angle. They are easily visible against a dark face, but may be less obvious against a light or white face.

padi56 · 14 August 2015, 01:57 AM

Just cannot understand why anyone brings back a thread that's 7 years old.

6 June 2008, 04:53 AM	#1
Land Dweller Member Join Date: May 2008 Location: London U.K. Posts: 62	Etched crown Datejust 116200 Hi all, For the life of me i can't see the etched crown on the crystal of my 2008 Datejust. Can anyone help? Thanks in advance L.D.

6 June 2008, 05:17 AM	#3
SPACE-DWELLER "TRF" Member Join Date: Apr 2007 Real Name: Bo Location: Denmark Watch: Rolex, of course! Posts: 22,436	Take a small flashlight and light onto the crystal with it from the 12 towards the 6 o' clock position. This will make the laser etched coronet ("LEC") literally glow up. __________________ With kind regards, Bo LocTite 221: The Taming Of The Screw...

7 June 2008, 03:36 AM	#5
Rhorne 2024 Pledge Member Join Date: Feb 2008 Real Name: Roger Location: Summerton, SC Watch: two tone blusey Posts: 79	Mine is a D series and it has it. __________________ Roger *"M" SUBMARINER DATE*

14 August 2015, 01:57 AM	#22
padi56 "TRF" Life Patron Join Date: Jun 2005 Real Name: Peter Location: Llanfairpwllgwyng Watch: ing you. Posts: 53,064	Just cannot understand why anyone brings back a thread that's 7 years old. __________________ ICom Pro3 All posts are my own opinion and my opinion only. "The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever." Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again. www.mc0yad.club Second in command CEO and left handed watch winder

6 June 2008, 05:03 AM	#2
Frampton "TRF" Member Join Date: May 2008 Location: N/A Posts: 74	It is very hard to see without magnification. You need to use a loupe or magnifying glass.

7 June 2008, 03:34 AM	#4
Land Dweller Member Join Date: May 2008 Location: London U.K. Posts: 62	Cheers lads, Someone has informed me that the latest Datejust's may not have the Laser etched crystal after all! surely not!

7 June 2008, 03:36 AM	#6
perryj "TRF" Member Join Date: Mar 2008 Location: USA Watch: Rolex, Swatch Posts: 952	I think it should....... did you try the flashlight ?

7 June 2008, 03:42 AM	#7
Land Dweller Member Join Date: May 2008 Location: London U.K. Posts: 62	Thanks, I'll dig my Flashlight out and have a look.

7 June 2008, 07:19 PM	#9
Land Dweller Member Join Date: May 2008 Location: London U.K. Posts: 62	I dont know weather this is reason to worry or not but my new Datejust shows no etched crown! be it under torchlight or natural light. It was bought from an AD. Would it be possible that for the 2008 model year that Rolex may well have dropped the etched crown on the Datejust and others, as the fakers can now replicate it? L.D.

7 June 2008, 07:39 PM	#10
swatty 2024 SubLV41 Pledge Member Join Date: Dec 2007 Real Name: Peter Location: Sydney Watch: The Game Posts: 17,415	If you look from below the 6 with a jewelers loope , its there

7 June 2008, 09:34 PM	#11
perryj "TRF" Member Join Date: Mar 2008 Location: USA Watch: Rolex, Swatch Posts: 952	Are you in a dark room and shining that flashlight through the side of the crystal? From 12 toward 6 ?

7 June 2008, 10:54 PM	#12
McGary911 "TRF" Member Join Date: May 2008 Real Name: John Location: Jacksonville, FL Watch: All of 'em. Posts: 132	THis is a common topic, and really, some people just have difficulty seeing it. The flashlight method works very well. Also, it may be helpful if you look at it from a pretty acute angle.....not head on. Once you see it once, It'll be easy to find. Kind of like when your buddy points out a scratch on your car you never noticed, but now notice it EVERY time.......'cept nicer. Sometimes i'll be in the car, waiting at a light with my hands on the wheel, and the sun will hit the edge of the crystal just right, and the coronet just about lights up. I can see it clearly from 3 feet away. That's a pretty nice way to start the day.....

8 June 2008, 04:12 AM	#13
mkultra "TRF" Member Join Date: Sep 2007 Location: The War Room Watch: 116200, 116710 Posts: 76	I have the same model 116200 Z series datejust and I found mine with bright sunlight. My dial is Rhodium Roman.

8 June 2008, 11:42 PM	#14
Land Dweller Member Join Date: May 2008 Location: London U.K. Posts: 62	Hmmm, no, the etched crown is not on my crystal at all, i have had two other people try to view it under the Flashlight and at angles etc etc. My watch is an M prefix 2008 Datejust. Maybe Rolex have dropped the crown so to speak, on non professional series watches.. L.D.

9 June 2008, 02:18 AM	#17
Land Dweller Member Join Date: May 2008 Location: London U.K. Posts: 62	Brilliant! I have just found the Laser Etched crown on the crystal of my Datejust, talk about microscopic! I found it by holding my watch into the sunset at about 45 degrees looking down from 12 to 6 on the dial "as advised earlier" and there it is, it seems much smaller than the crown etching on the Sub etc. Thanks all for your advice. Ps, give it a go Neil i'm sure you will see the same too.

14 August 2015, 12:03 AM	#19
polarinda "TRF" Member Join Date: Mar 2011 Real Name: Trav Location: singapore Watch: it Posts: 2,316	I just had a horrid time locating the lec on my 16200 silver dial d serial. Trick...in a dark room...shine a torch from 3 oclock flush with the crystal and look from 6 oclock slightly at an angle of 30 degrees from plane of crystal. Pops

14 August 2015, 01:43 AM	#20
BuddaLun "TRF" Member Join Date: Jul 2015 Location: USA Watch: LV & BLRO Posts: 210	I have found that the flash on the iPhone (or the flashlight - same light source) is a perfect way to make the etched crown show up. As seen here: http://thegreengmthand.com/about/use...r_etched_crown

14 August 2015, 01:56 AM	#21
jhe888 "TRF" Member Join Date: Apr 2015 Real Name: John Location: Texas Posts: 377	Shine a light at a shallow angle across the crystal. Move the light around a bit. It may be easier to see if you look at the crystal from a shallow angle. They are easily visible against a dark face, but may be less obvious against a light or white face.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)