ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

gt390 · 26 September 2015, 08:27 AM

Just wondering if anyone had a favorite or known reliable watchmaker in the state of Maine. Looking for an independent as opposed to AD. I have had a couple of bad experiences lately and would like to find someone I could trust.
Thank you

bharat · 26 September 2015, 08:41 AM

I have never worked with these people before, but I know that Swiss Time on Exchange street in Portland has Rolex servicing capabilities. They are a Swiss family and have been in existence a couple decades from what I understand. They routinely buy used watches - Rolex, PP, Tudor and service them to resell. Again - no first hand experience, so you would have to 'interview' them yourself to make a decision.

I'm looking for one myself, so if you do have a good experience with anyone let me know.

Bharat

Quote:

Originally Posted by gt390

Just wondering if anyone had a favorite or known reliable watchmaker in the state of Maine. Looking for an independent as opposed to AD. I have had a couple of bad experiences lately and would like to find someone I could trust.
Thank you

adawil2002 · 26 September 2015, 09:11 AM

Swiss Time has not serviced my Rolexes. If my watch(s) need service I'd give them the work for my older watches that are out of warranty. They also have a nice selection of pre-owned Rolexes.

I have used them for my 1890 Tiffany pocket watch which hadn't run in my lifetime. It's a gold minute repeater with chimes for the hour and every 5 minutes past the hour. They were able to fix it when Betteridge Jewelers in Greenwich CT refused in one breath and asked if I 'd sell it with the next.

They restored my Black Forest Cuckoo Clock this winter, which would not run continuously. They just completed my Plymouth mantle clock most recently, picked it up in August.

gt390 · 27 September 2015, 12:32 AM

Kind of tough being up here in the wild woods of Maine huh guys. Not a lot of options. Andrew I have heard mixed reviews on Swiss time. Having gotten burned a couple times I am hoping to find a solid watchmaker I can use long term. A friend says there is a shop in Bangor called Tabors I believe. I may give it a try and report back. Baharat feel free to PM me and I can give you my experiences so far with the places I have used.

azguy · 27 September 2015, 03:43 AM

It's a small country and the post office goes everywhere, you could use Rikki in FL or ABC Watchwerks in LA, both will treat you great and the service will be done to your wishes and quickly.

Sublover2166 · 27 September 2015, 08:53 AM

Quote:

Originally Posted by azguy

It's a small country and the post office goes everywhere, you could use Rikki in FL or ABC Watchwerks in LA, both will treat you great and the service will be done to your wishes and quickly.

X2 on Rik in Florida. He does awesome work and you can ask him about anything over the phone. Many of us members here swear by Rik.
Time Care Inc.

HogwldFLTR · 27 September 2015, 06:23 AM

I've used the Watchmaker in Stoneham, MA for some work but find them over priced.

https://thewatchmaker.com/

I've also used Long's in Peabody, MA and they have an independent repair service which is Rolex approved and matches Rolex's pricing closely and does good work as well as providing a full Rolex warranty.

http://www.longsjewelers.com/

I'd stop in to the Peabody store and talk with their service guy there; he doesn't do the service which is done off site.

Did you talk to Springers in Portland?

gt390 · 27 September 2015, 08:35 AM

Yes Lee I have been into Springers at both the Brunswick and Portland location. They are great people and I never thought to ask if they did any work on sight. I just assumed they sent everything to RSC. My issue stems from having the Mercedes hands on a couple of my watches and actually thinking of having them put on my newest one. We all know Rolex frowns on mods :) I had a couple bad experiences sending watches out for service as I mentioned earlier. I would like to find a place where I could walk in and talk to the watchmaker in person. They are few and far between up here in Maine. Thank you for all the responses thus far.

HogwldFLTR · 27 September 2015, 09:10 AM

The Watchmaker in Stoneham might be the place; they replaced the dial on my DJ for me but it took effort to get them not to do a full service on it. As other's have said, Rik in FL is good; I've used him for service with good success.

gt390 · 28 September 2015, 10:08 AM

Thank you hog wild and everyone who has responded. I may try stoneham, it is not all that far.

HogwldFLTR · 28 September 2015, 12:02 PM

Quote:

Originally Posted by gt390

Thank you hog wild and everyone who has responded. I may try stoneham, it is not all that far.

I'll be paying them a visit shortly myself for some work.

26 September 2015, 08:27 AM	#1
gt390 "TRF" Member Join Date: Nov 2008 Real Name: Danny Location: Maine, USA Watch: Rolex air-king Posts: 16	Rolex service in Maine Just wondering if anyone had a favorite or known reliable watchmaker in the state of Maine. Looking for an independent as opposed to AD. I have had a couple of bad experiences lately and would like to find someone I could trust. Thank you

26 September 2015, 09:11 AM	#3
adawil2002 2024 Pledge Member Join Date: Dec 2014 Real Name: Andrew Wilson Location: Brunswick, Maine Watch: 16550 Explorer II Posts: 1,773	Swiss Time has not serviced my Rolexes. If my watch(s) need service I'd give them the work for my older watches that are out of warranty. They also have a nice selection of pre-owned Rolexes. I have used them for my 1890 Tiffany pocket watch which hadn't run in my lifetime. It's a gold minute repeater with chimes for the hour and every 5 minutes past the hour. They were able to fix it when Betteridge Jewelers in Greenwich CT refused in one breath and asked if I 'd sell it with the next. They restored my Black Forest Cuckoo Clock this winter, which would not run continuously. They just completed my Plymouth mantle clock most recently, picked it up in August. __________________ 6284 SS, 16014 SS Jubilee silver stick, 16253 TT Blue Thunderbird, 16550 SS Exp II Cream, bought in 1986, 116400GV Z-blue Milgauss, 79260 Tudor, 116660 DSSD-Blue, 116500LV Daytona White, 116710 BLNR, 326934 Blue Skydweller

27 September 2015, 06:23 AM	#7
HogwldFLTR 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Aug 2012 Real Name: Lee Location: 42.48.45N70.48.48 Watch: Too many to list! Posts: 33,697	I've used the Watchmaker in Stoneham, MA for some work but find them over priced. https://thewatchmaker.com/ I've also used Long's in Peabody, MA and they have an independent repair service which is Rolex approved and matches Rolex's pricing closely and does good work as well as providing a full Rolex warranty. http://www.longsjewelers.com/ I'd stop in to the Peabody store and talk with their service guy there; he doesn't do the service which is done off site. Did you talk to Springers in Portland? __________________ Troglodyte in residence! https://www.rolexforums.com/showthread.php?t=808599

27 September 2015, 09:10 AM	#9
HogwldFLTR 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Aug 2012 Real Name: Lee Location: 42.48.45N70.48.48 Watch: Too many to list! Posts: 33,697	The Watchmaker in Stoneham might be the place; they replaced the dial on my DJ for me but it took effort to get them not to do a full service on it. As other's have said, Rik in FL is good; I've used him for service with good success. __________________ Troglodyte in residence! https://www.rolexforums.com/showthread.php?t=808599

27 September 2015, 12:32 AM	#4
gt390 "TRF" Member Join Date: Nov 2008 Real Name: Danny Location: Maine, USA Watch: Rolex air-king Posts: 16	Kind of tough being up here in the wild woods of Maine huh guys. Not a lot of options. Andrew I have heard mixed reviews on Swiss time. Having gotten burned a couple times I am hoping to find a solid watchmaker I can use long term. A friend says there is a shop in Bangor called Tabors I believe. I may give it a try and report back. Baharat feel free to PM me and I can give you my experiences so far with the places I have used.

27 September 2015, 03:43 AM	#5
azguy Banned Join Date: Sep 2011 Real Name: ------- Location: ------- Watch: --------- Posts: 12,609	It's a small country and the post office goes everywhere, you could use Rikki in FL or ABC Watchwerks in LA, both will treat you great and the service will be done to your wishes and quickly.

27 September 2015, 08:35 AM	#8
gt390 "TRF" Member Join Date: Nov 2008 Real Name: Danny Location: Maine, USA Watch: Rolex air-king Posts: 16	Yes Lee I have been into Springers at both the Brunswick and Portland location. They are great people and I never thought to ask if they did any work on sight. I just assumed they sent everything to RSC. My issue stems from having the Mercedes hands on a couple of my watches and actually thinking of having them put on my newest one. We all know Rolex frowns on mods :) I had a couple bad experiences sending watches out for service as I mentioned earlier. I would like to find a place where I could walk in and talk to the watchmaker in person. They are few and far between up here in Maine. Thank you for all the responses thus far.

28 September 2015, 10:08 AM	#10
gt390 "TRF" Member Join Date: Nov 2008 Real Name: Danny Location: Maine, USA Watch: Rolex air-king Posts: 16	Thank you hog wild and everyone who has responded. I may try stoneham, it is not all that far.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)