ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Mattcrx · 25 August 2016, 09:43 PM

Hi guys, this may be a stupid question but I'm looking for a perfect screwdriver for a Rolex bracelet... (116610) All the screw drivers I seem to buy are either slightly too big or slightly too small so after a while it damaged the screw head and a damaged screw head annoys the shit out of me!

I don't want to break the bank and buy a gen Rolex one so is there a perfect alternative?

Thanks Matt

Zdenek · 25 August 2016, 10:23 PM

Whatever with 1.6 mm blade (Bergeon, Flume, ... or noname).

Andad · 28 August 2016, 12:36 PM

Quote:

Originally Posted by Zdenek

Whatever with 1.6 mm blade (Bergeon, Flume, ... or noname).

Avoid these.....

mnbookman · 26 August 2016, 03:10 AM

Rolex hollow grinds their screwdrivers using a tool. This allows both sides of the blade to touch both walls in near parallel fashion this preventing the infamous bow tie.

Many watchmaker's use a wedge shape with approximately 8-16° angle, and then file or grind the tip so that it won't touch the bottom of the screw slot, ensuring it is evenly seated against both screw recess walls.

I would practice shaping blades until you can achieve this. Then, you won't chew up screw heads.
Any blades I have ever purchased or made have required periodic dressing, and adjustments between calibers.

Fredrik · 26 August 2016, 04:13 AM

The Rolex 2100 seadweller screwdriver is what I use. You can find it in the classifieds now and then but also buy it at an AD(at an extortionate price).

rozyd · 26 August 2016, 04:26 AM

The screwdriver that came with my Panerai 111 also works well!

Mattcrx · 26 August 2016, 04:27 AM

ill just file one down.. Idearly I want the 2100 driver, Iv seen them on eBay but like you say they are a horrendous price!

Thanks guys

toolr · 26 August 2016, 02:40 PM

You can find the Horotec screwdriver and order the 1.6mm hollow ground blade tips, works perfect, and can be found on Otto Frei (OFREI) website.

SC11 · 26 August 2016, 03:57 PM

Matt are you UK based?

handsfull · 28 August 2016, 09:59 AM

FWIW: It's actually a 1.7mm hollow ground. So if your looking for a perfect fit, buy a 1.8 and hand file to a 1.7mm.

Johnv · 28 August 2016, 07:21 PM

This works well for me.
http://www.watch-tool.de/html/rlx_special.php?id=0905hh

25 August 2016, 09:43 PM	#1
Mattcrx "TRF" Member Join Date: Jan 2013 Location: Southport Posts: 32	Rolex bracelet screwdriver Hi guys, this may be a stupid question but I'm looking for a perfect screwdriver for a Rolex bracelet... (116610) All the screw drivers I seem to buy are either slightly too big or slightly too small so after a while it damaged the screw head and a damaged screw head annoys the shit out of me! I don't want to break the bank and buy a gen Rolex one so is there a perfect alternative? Thanks Matt

25 August 2016, 10:23 PM	#2
Zdenek "TRF" Member Join Date: Mar 2010 Location: Europe Posts: 357	Whatever with 1.6 mm blade (Bergeon, Flume, ... or noname). __________________ "Whoever said the pen is mightier than the sword, obviously never encountered automatic weapons." – General Douglas MacArthur "I can resist everything except temptation." – Oscar Wilde

26 August 2016, 03:10 AM	#4
mnbookman "TRF" Member Join Date: Oct 2014 Posts: 79	Rolex hollow grinds their screwdrivers using a tool. This allows both sides of the blade to touch both walls in near parallel fashion this preventing the infamous bow tie. Many watchmaker's use a wedge shape with approximately 8-16° angle, and then file or grind the tip so that it won't touch the bottom of the screw slot, ensuring it is evenly seated against both screw recess walls. I would practice shaping blades until you can achieve this. Then, you won't chew up screw heads. Any blades I have ever purchased or made have required periodic dressing, and adjustments between calibers.

26 August 2016, 04:13 AM	#5
Fredrik 2024 Pledge Member Join Date: Oct 2011 Location: Sweden Watch: 1680 Posts: 1,874	The Rolex 2100 seadweller screwdriver is what I use. You can find it in the classifieds now and then but also buy it at an AD(at an extortionate price).

26 August 2016, 04:26 AM	#6
rozyd "TRF" Member Join Date: Nov 2010 Location: Michigan Watch: SD,DD,Exp1,Daytona Posts: 550	The screwdriver that came with my Panerai 111 also works well!

26 August 2016, 04:27 AM	#7
Mattcrx "TRF" Member Join Date: Jan 2013 Location: Southport Posts: 32	ill just file one down.. Idearly I want the 2100 driver, Iv seen them on eBay but like you say they are a horrendous price! Thanks guys

26 August 2016, 02:40 PM	#8
toolr 2024 Pledge Member Join Date: Sep 2009 Location: Northwest Posts: 1,368	You can find the Horotec screwdriver and order the 1.6mm hollow ground blade tips, works perfect, and can be found on Otto Frei (OFREI) website.

26 August 2016, 03:57 PM	#9
SC11 Banned Join Date: Jul 2010 Real Name: Sam Location: UK Watch: AP ☠️ Posts: 6,151	Matt are you UK based?

28 August 2016, 09:59 AM	#10
handsfull "TRF" Member Join Date: Apr 2010 Real Name: J Location: The great Midwest Watch: youlookinat? Posts: 2,369	FWIW: It's actually a 1.7mm hollow ground. So if your looking for a perfect fit, buy a 1.8 and hand file to a 1.7mm.

28 August 2016, 07:21 PM	#11
Johnv "TRF" Member Join Date: May 2016 Real Name: John Verkerk Location: The Netherlands Posts: 53	This works well for me. http://www.watch-tool.de/html/rlx_special.php?id=0905hh

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)