ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Ouro9999 · 4 October 2016, 04:14 AM

Hi everyone,

Bought o nice tudor day-date, 35 mm blue dial, paid only 700 USD for it, complete set, including original papers.

Not sure if this is a keeper, may sell it on future. Got it because it was cheap. but there is a catch, one of the lugs arm was overpolished, and its shorter than the oposite arm (holes not afected), the rest seems ok.

I have read about a company that may fix this, the guy name is Rocco, and its in UK. There also another company named Lewis Wtach Co in Australia.

My question is, should i fix this?

Thanks for your opinion.

Ouro9999 · 4 October 2016, 04:15 AM

The lug arm in question is o 7 position.

jatco · 4 October 2016, 04:27 AM

IMO, yes.. Needs repair to bring it back to original..
I would..!!

Ouro9999 · 4 October 2016, 04:36 AM

Quote:

Originally Posted by jatco

IMO, yes.. Needs repair to bring it back to original..
I would..!!

Thank you Thomas, any sugestion where i could repair this?

Kiaraff · 4 October 2016, 06:17 AM

I had the same problem with one of my Watches. Rocco does not offer such a service.
Michael Young from classicwatchparts can fix this and he's cheap.
The only downside is you have to wait a very long time.

Ouro9999 · 4 October 2016, 06:33 AM

Quote:

Originally Posted by Kiaraff

I had the same problem with one of my Watches. Rocco does not offer such a service.
Michael Young from classicwatchparts can fix this and he's cheap.
The only downside is you have to wait a very long time.

Thanks a lot for this info, just send an inquire to Michael Young. Will wait for their answer.

Thanks!

Ouro9999 · 4 October 2016, 10:05 AM

Had exchanged emails with Aaron from ABC Watchwerks, sending the watch there, Will post the result after getting the case back.

Enviado de meu SM-N910C usando Tapatalk

jatco · 4 October 2016, 10:56 AM

Quote:

Originally Posted by Ouro9999

Had exchanged emails with Aaron from ABC Watchwerks, sending the watch there, Will post the result after getting the case back.

Enviado de meu SM-N910C usando Tapatalk

..Well, based on their site, I think your piece is in good hands...!!

Ouro9999 · 7 October 2016, 06:28 AM

Hi, i have decided to get a new case instead, was it a smart move?

Started a new topic to discuss this change:

http://www.rolexforums.com/showthread.php?t=498964

Thanks all for your opinion

locutus49 · 7 October 2016, 06:49 AM

You should do it if it will make you happy, and if you will keep it a long time. If you are going to flip it, then non=original parts will hurt the resale value.

Ouro9999 · 8 October 2016, 07:15 PM

Thank for all opinion, changed my mind again, canceled the the new case, still at Rolex for a full overhaul, after that will send to ABC for case repair if needed. Thanks all

Enviado de meu SM-N910C usando Tapatalk

4 October 2016, 04:14 AM	#1
Ouro9999 "TRF" Member Join Date: Apr 2016 Real Name: Romero Location: Brasil Watch: SUB16610lv Posts: 587	Bought a Tudor Day-date 94500 should i repair it? Hi everyone, Bought o nice tudor day-date, 35 mm blue dial, paid only 700 USD for it, complete set, including original papers. Not sure if this is a keeper, may sell it on future. Got it because it was cheap. but there is a catch, one of the lugs arm was overpolished, and its shorter than the oposite arm (holes not afected), the rest seems ok. I have read about a company that may fix this, the guy name is Rocco, and its in UK. There also another company named Lewis Wtach Co in Australia. My question is, should i fix this? Thanks for your opinion.

4 October 2016, 04:27 AM	#3
jatco 2024 SubLV41 Pledge Member Join Date: Feb 2010 Real Name: Thomas Location: YVR Watch: 116233/79190 Posts: 50,567	IMO, yes.. Needs repair to bring it back to original.. I would..!! __________________ . ..- ' A Crown for every achievement '

4 October 2016, 04:15 AM	#2
Ouro9999 "TRF" Member Join Date: Apr 2016 Real Name: Romero Location: Brasil Watch: SUB16610lv Posts: 587	The lug arm in question is o 7 position.

4 October 2016, 06:17 AM	#5
Kiaraff "TRF" Member Join Date: Sep 2015 Location: Antwerp - Belgium Posts: 116	I had the same problem with one of my Watches. Rocco does not offer such a service. Michael Young from classicwatchparts can fix this and he's cheap. The only downside is you have to wait a very long time.

4 October 2016, 10:05 AM	#7
Ouro9999 "TRF" Member Join Date: Apr 2016 Real Name: Romero Location: Brasil Watch: SUB16610lv Posts: 587	Had exchanged emails with Aaron from ABC Watchwerks, sending the watch there, Will post the result after getting the case back. Enviado de meu SM-N910C usando Tapatalk

7 October 2016, 06:28 AM	#9
Ouro9999 "TRF" Member Join Date: Apr 2016 Real Name: Romero Location: Brasil Watch: SUB16610lv Posts: 587	Hi, i have decided to get a new case instead, was it a smart move? Started a new topic to discuss this change: http://www.rolexforums.com/showthread.php?t=498964 Thanks all for your opinion

7 October 2016, 06:49 AM	#10
locutus49 Banned Join Date: May 2014 Real Name: John Location: La Jolla, CA Watch: Platona Posts: 12,194	You should do it if it will make you happy, and if you will keep it a long time. If you are going to flip it, then non=original parts will hurt the resale value.

8 October 2016, 07:15 PM	#11
Ouro9999 "TRF" Member Join Date: Apr 2016 Real Name: Romero Location: Brasil Watch: SUB16610lv Posts: 587	Thank for all opinion, changed my mind again, canceled the the new case, still at Rolex for a full overhaul, after that will send to ABC for case repair if needed. Thanks all Enviado de meu SM-N910C usando Tapatalk

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)