ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Daniel23456 · 20 September 2017, 05:15 AM

Hey folks,
I am loving the explorer so much that I am planning to get some straps for it. Mine is the ref 114270 but I would like to get any ref if possible. Can you share some pictures of your rollies exp on rubber, or straps so I can see how it looks? Thanks! Cheers!

SemperFi · 20 September 2017, 05:27 AM

Quote:

Originally Posted by Daniel23456

Hey folks,
I am loving the explorer so much that I am planning to get some straps for it. Mine is the ref 114270 but I would like to get any ref if possible. Can you share some pictures of your rollies exp on rubber, or straps so I can see how it looks? Thanks! Cheers!

Here's my 214270 on a RubberB.

Chadridv · 20 September 2017, 06:11 AM

Quote:

Originally Posted by SemperFi

Here's my 214270 on a RubberB.

Love that!

Daniel23456 · 20 September 2017, 06:11 AM

Quote:

Originally Posted by SemperFi

Here's my 214270 on a RubberB.

It looks very good! Where did you purchase the strap? Thanks!

SemperFi · 20 September 2017, 06:43 AM

Quote:

Originally Posted by Daniel23456

It looks very good! Where did you purchase the strap? Thanks!

It was purchased directly from RubberB.com
They're pricey but the fit and comfort are top notch.

Daniel23456 · 20 September 2017, 06:55 AM

Quote:

Originally Posted by SemperFi

It was purchased directly from RubberB.com
They're pricey but the fit and comfort are top notch.

Thanks!

jrs146 · 20 September 2017, 06:30 AM

Quote:

Originally Posted by SemperFi

Here's my 214270 on a RubberB.

I'm typically not a fan of RubberB Straps... but boy that's niiiice

Joemck · 20 September 2017, 07:21 AM

Quote:

Originally Posted by SemperFi

Here's my 214270 on a RubberB.

Looks sharp

maximilianmuller · 23 September 2017, 05:40 AM

Quote:

Originally Posted by SemperFi

Here's my 214270 on a RubberB.

I wanted to say just that your Explorer I is a prime example of a classic, timeless watch. Wear her well!

Ruud Van Driver · 23 September 2017, 06:15 PM

Quote:

Originally Posted by SemperFi

Here's my 214270 on a RubberB.

Not usually a fan of Rolex on rubber but that looks pretty cool

ekiro · 20 September 2017, 08:04 AM

Definitely makes a huge difference. like a new watch!

Bdevenney · 20 September 2017, 09:30 AM

Wow! That is nice.

SemperFi · 20 September 2017, 09:57 AM

I'm actually wearing it right now so here's a few more pics.

Boaters · 20 September 2017, 11:56 AM

That looks really nice!

sanosan34 · 20 September 2017, 12:39 PM

The Explorer 1 is the best looking Rolex on rubber. The sleekness of the rubber and the smooth polished bezel, narrow lugs and simple dial all complement each other so perfectly.

ajas · 20 September 2017, 04:29 PM

Love it.
Would Rubber B for SubC fit 39mm Explorer or they are different animals?

TudorBeast · 20 September 2017, 04:59 PM

Quote:

Originally Posted by ajas

Love it.
Would Rubber B for SubC fit 39mm Explorer or they are different animals?

The Everest (competitor to RubberB) bands are interchangeable between the models according to Everest. So I would say yes.

ajas · 20 September 2017, 05:26 PM

Quote:

Originally Posted by TudorBeast

The Everest (competitor to RubberB) bands are interchangeable between the models according to Everest. So I would say yes.

Thanks a lot. Cheers

Sent from my SM-G930F using Tapatalk

maximilianmuller · 23 September 2017, 05:38 AM

Quote:

Originally Posted by TudorBeast

The (competitor to RubberB) bands are interchangeable between the models according to Everest. So I would say yes.

Chinese Made is not competition to Swiss Made. Only one strap says where it is made in the rubber. Others do not dare. I am from the German-Suisse border, and we have a stubborn thing about craftsmanship. ;-) IMHO from Basel Bädischer

maximilianmuller · 23 September 2017, 05:47 AM

Quote:

Originally Posted by ajas

Love it.
Would Rubber B for SubC fit 39mm Explorer or they are different animals?

Some Rolex watches share the identical case. But we must pay attention to the mysterious "pin hole position". For such straps with hard plastic inserts, it would depend on that pin position as well. Not just the height, width and girth. I am sure that the strap companies would love to have the rolex calibration sheets. LOL It must be a task to obtain each watch to study the micro chiffres.

Stx · 23 September 2017, 06:10 AM

I recently purchased a 214270 new and a RubberB and am very happy with it. I like the way it wears especially as I swim frequently. The dealer installed it. I purchased the model that uses the bracelet clasp. My Pros - gives the watch a higher quality 'finish', clasp keeps the watch from rotating around the wrist. Cons - harder to install, harder to switch between the bracelet and RubberB, isn't adjustable. I went on the dealer's recommendation. I like it this way but the tang has some advantages. I have a loose fit which allows my wrist to swell (as it does in the hot climate I live in). Actually, I wore it for two weeks before having the strap cut, just to get a feel for it.

I would consider an Everest if buying with a tang - only because the strap holes are closer which allows a better fit. With a tang, I always seem to need a spot between two holes, the watch is loose enough to rotate or too tight.

I had a great experience buying from a small AD, both with price and extra services such as adjusting the RubberB. As a side, I like charging as I get extended warranty and Price Rewind, which is now saying I'll get another $160 off my watch.

GarbanzoNegro · 23 September 2017, 05:05 PM

Quote:

Originally Posted by Daniel23456

Hey folks,

I am loving the explorer so much that I am planning to get some straps for it. Mine is the ref 114270 but I would like to get any ref if possible. Can you share some pictures of your rollies exp on rubber, or straps so I can see how it looks? Thanks! Cheers!

Hi,

If I am not mistaken (I cannot remember if it was RubberB or Everest), I contacted the company and they told me that they did not offer any strap for the 36 mm Explorer. Make sure that it will fit yours.

Best regards,

Mr. Gonzalez

dysondiver · 23 September 2017, 06:22 PM

makes a tempting alternative to an aquanaut ,,,, nearly.

skkali168 · 25 September 2017, 09:56 AM

love the look of that. I have been looking at explorer pics the last few days.....

carava501 · 3 October 2017, 06:20 AM

Love my rubber b on my explorer!

ajn3323 · 3 October 2017, 07:55 AM

Here's mine. It's a 214270 on Everest with tang. The strap was purchased at an AD and was not specific to any model.

Sent from my iPhone using Tapatalk

Cutlass · 3 October 2017, 08:05 AM

Ehh,this pic of my EX1 is already well known.. but I will post it again..

Beckster · 15 August 2018, 01:26 AM

Quote:

Originally Posted by Cutlass

Ehh,this pic of my EX1 is already well known.. but I will post it again..

Wow. Looks good. Very tempting. Hmm...

maximilianmuller · 14 August 2018, 11:25 PM

OOPS!! Wrong thread! LOL

misterpeanut · 15 August 2018, 02:29 AM

I know. I ruled out the Exp 1 a few times for various reasons, but every time I see it on a rubber it always jumps back into my "decision queue."

20 September 2017, 05:15 AM	#1
Daniel23456 "TRF" Member Join Date: Sep 2017 Location: Watch Land Posts: 683	Explorer I on rubber Hey folks, I am loving the explorer so much that I am planning to get some straps for it. Mine is the ref 114270 but I would like to get any ref if possible. Can you share some pictures of your rollies exp on rubber, or straps so I can see how it looks? Thanks! Cheers!

20 September 2017, 09:57 AM	#13
SemperFi "TRF" Member Join Date: Sep 2014 Real Name: Angelo Location: Brooklyn, NY Watch: Rolex Submariner Posts: 42,164	I'm actually wearing it right now so here's a few more pics. __________________ Rolex Submariner Omega Seamaster Aqua Terra Tudor Black Bay 58 Blue Tudor Ranger 79910 Nomos Club Datum 733 Nomos Metro 38 Stowa Flieger Classic 40 * Card carrying member of TRF's Global Association of Retro-Grouch-Curmudgeons *

3 October 2017, 06:20 AM	#25
carava501 "TRF" Member Join Date: Jul 2017 Location: Tampa Posts: 86	Love my rubber b on my explorer! Attached Images

3 October 2017, 08:05 AM	#27
Cutlass "TRF" Member Join Date: Dec 2015 Real Name: Denis Location: Croatia / Zagreb Posts: 706	Ehh,this pic of my EX1 is already well known.. but I will post it again.. __________________ IG & email : @vintage_seiko_world & @budakknives

20 September 2017, 08:04 AM	#11
ekiro Banned Join Date: Sep 2017 Location: USA Posts: 72	Definitely makes a huge difference. like a new watch!

20 September 2017, 09:30 AM	#12
Bdevenney "TRF" Member Join Date: Feb 2011 Location: Philadelphia, PA Watch: 116610LN Posts: 224	Wow! That is nice.

20 September 2017, 11:56 AM	#14
Boaters 2024 Pledge Member Join Date: May 2015 Real Name: Mike Location: Pacific Northwest Watch: 116610LV 16710 SD Posts: 10,653	That looks really nice!

20 September 2017, 12:39 PM	#15
sanosan34 "TRF" Member Join Date: Oct 2016 Location: Arizona Posts: 108	The Explorer 1 is the best looking Rolex on rubber. The sleekness of the rubber and the smooth polished bezel, narrow lugs and simple dial all complement each other so perfectly.

20 September 2017, 04:29 PM	#16
ajas "TRF" Member Join Date: Nov 2013 Real Name: Will Location: Kuala Lumpur Watch: SubC, Pam, Speede Posts: 3,146	Love it. Would Rubber B for SubC fit 39mm Explorer or they are different animals?

23 September 2017, 06:10 AM	#21
Stx "TRF" Member Join Date: Aug 2017 Location: Chicago Posts: 49	I recently purchased a 214270 new and a RubberB and am very happy with it. I like the way it wears especially as I swim frequently. The dealer installed it. I purchased the model that uses the bracelet clasp. My Pros - gives the watch a higher quality 'finish', clasp keeps the watch from rotating around the wrist. Cons - harder to install, harder to switch between the bracelet and RubberB, isn't adjustable. I went on the dealer's recommendation. I like it this way but the tang has some advantages. I have a loose fit which allows my wrist to swell (as it does in the hot climate I live in). Actually, I wore it for two weeks before having the strap cut, just to get a feel for it. I would consider an Everest if buying with a tang - only because the strap holes are closer which allows a better fit. With a tang, I always seem to need a spot between two holes, the watch is loose enough to rotate or too tight. I had a great experience buying from a small AD, both with price and extra services such as adjusting the RubberB. As a side, I like charging as I get extended warranty and Price Rewind, which is now saying I'll get another $160 off my watch.

23 September 2017, 06:22 PM	#23
dysondiver "TRF" Member Join Date: Jul 2010 Real Name: tom Location: northern ireland Watch: my fins Posts: 10,063	makes a tempting alternative to an aquanaut ,,,, nearly.

25 September 2017, 09:56 AM	#24
skkali168 "TRF" Member Join Date: Mar 2017 Real Name: RP Location: irvine Watch: 116689 Posts: 1,222	love the look of that. I have been looking at explorer pics the last few days.....

3 October 2017, 07:55 AM	#26
ajn3323 "TRF" Member Join Date: Mar 2015 Location: Southeast USA Posts: 158	Here's mine. It's a 214270 on Everest with tang. The strap was purchased at an AD and was not specific to any model. Sent from my iPhone using Tapatalk

14 August 2018, 11:25 PM	#29
maximilianmuller "TRF" Member Join Date: Jun 2017 Real Name: Maximilian Location: Frankfurt, Ger Watch: 116610LV/TBB Posts: 279	OOPS!! Wrong thread! LOL

15 August 2018, 02:29 AM	#30
misterpeanut "TRF" Member Join Date: Feb 2015 Location: Va Posts: 49	I know. I ruled out the Exp 1 a few times for various reasons, but every time I see it on a rubber it always jumps back into my "decision queue."

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)