Going to the AD for sizing of pre owned Rolex?

[Tom_blam5]

Hello everyone!


As i'm new to the world of Rolex i just had to get myself one, picked myself up a Explorer 2 16570 and just love it so far. Though it's in fantastic shape and i can't be happier it doesn't fit me very well, ( i like having my watches tighter) I'd like to have it sized, Now i could go to any jeweler and have it done but that wouldn't be right of me, I'd love to visit my local AD and lavish in what it's like to walk in there and get that good feeling everyone seems to get

I'm just curious on a few things, firstly. How much will it cost? seeing as that i didn't purchases from my local AD i know i'll probably have to pay, but how much? I'm in Ontario Canada for what it's worth... also if the watch doesn't come with a box/papers and you just bring the watch in how do you go about it? ( mine didn't but i'm not selling it so i'm not to to concerned)

Let me know what you guys think anything helps! I just wanna say i'm so happy that i finally stepped into the world of Swiss watches. I've played around with many Boluva's and lower grade watches so this one feels extra special. Thanks very much guys!

[SubMarine]

Why can't you do this yourself with a jeweler's screwdriver?

[LKWAN]

I typically pay $0-20.00 USD at my local Rolex AD for sizing.

[dmash]

You could always call the AD in question. I’m pretty sure they are better informed regarding their pricing scheme as opposed to random members from differing countries.

In regards to how you do it, you’d bring the watch in and say ‘Hi, I would like my bracelet sized please’.

Hope this helps.

[asiparks]

Congrats on you Explorer, lovely watch...

if you know how to work a screwdriver, it's not hard to do yourself. If you'd rather not, read some of the posts on here in the vein of "AD scratched/buggered my screws/links"...

There's no guarantee that an AD will do a better job than any other jeweler you might go to...

good luck!

[Tom_blam5]

Thank you! I'd love to do it myself as it would save me a trip in traffic but going to the AD would be pretty lovely! I could trust myself not to scratch it....or the AD.... I think i may just go in and visit them! Just wanted to know what others did

[77T]

Originally Posted by Tom_blam5

Thank you! I'd love to do it myself as it would save me a trip in traffic but going to the AD would be pretty lovely! I could trust myself not to scratch it....or the AD.... I think i may just go in and visit them! Just wanted to know what others did

It might be a nice visit. A couple of suggestions - don’t mention your watch. Just ask to see the latest models they’ve received.

Next, ask them if all Rolexes are so loose as yours. I predict they’ll want to show you how it “should” fit.


Sent from my iPhone using Tapatalk Pro

[MonsterSS]

Originally Posted by Tom_blam5

Thank you! I'd love to do it myself as it would save me a trip in traffic but going to the AD would be pretty lovely! I could trust myself not to scratch it....or the AD.... I think i may just go in and visit them! Just wanted to know what others did

Welcome and congrats on your rolex! The ad may charge 25 or 30 bucks. But it’s worth it to start a dialogue with an ad.

[Dancing Fire]

Buy the correct size screwdriver and do it yourself. I sized my wife's new DJ w/o putting a scratch on the bracelet. If I can do it anybody can do it!

[Bigblu10]

Order a Horotec hollow ground screwdriver online and do it yourself. Easy DIY with the right screwdriver.

[No SUBctitute]

Oh dear! Reading a few posts on ADs scratching (and worse) watches will cure you of any notion that the AD should size your watch.

[Tom_blam5]

Originally Posted by No SUBctitute

Oh dear! Reading a few posts on ADs scratching (and worse) watches will cure you of any notion that the AD should size your watch.

Yeah i really really don't want that to happen, you'd think after spending such a considerable amount on one of their pieces they'd put 110% into respecting the watch yet some damage it so easily. it's crazy if you ask me!!!

[T01]

Shouldn't be a problem, some ADs will do it for free, some $20.00.

[Foxiness]

Buy a OEM Panerai screwdriver it’s a quality one that’s only $20

[brandrea]

If you’re near Toronto drop in to The RSC.

[mmmmp]

I'm in Toronto and I recommend the RSC on St. Clair. They're trustworthy and probably won't charge, but call them first and ask questions. Be happy there's a RSC so close, there's not many. This is the Official Rolex Service Center, *not* an AD. They don't sell watches - service only.

I also recommend Humbertown Jewellers at Dundas and Royal York. They've been an Authorized Dealer for 20 years and are very reliable. Bought 3 Rolex watches there. It's a very nice, classy place which also sells P.P., IWC, Nardin, Tudor, etc. Plenty to keep a WIS entertained. Although they may charge a nominal fee I'd call first just to be sure.

Good luck,
Mark

Sent from my SM-A520W using Tapatalk

[codecow]

I think your AD will charge $100 Canadian.

[Alternative_Facts]

ANY time i walked into an AD and asked for an adjustment (like 2 times) they always said the guy who does that "is not here right now"... they don't let anyone mess with them because there are a lot of horror stories with scratches etc.

Any good watch place can do it for you and will be happy with a $20 tip.

[Rsubnodate]

My AD has always adjusted my watches whenever I have brought one in. I have yet to be charged for an adjustment.

[doubleroll]

Local AD near me will size for free even if you did not purchase from them.

[Tom_blam5]

Thanks guys! i think i'll go to the RSC and have them size it for me. Should be fun!

[Bo-Dacious]

I'd recommend doing it yourself.

When you allow someone else to work with your watch you risk them damaging it. Like many I assumed that my AD would treat my watch like I do, which is not the case. I've had watches scratched during bracelet adjusting and bracelet removal.

Food for thought.

[spoilsofwar01]

If you take it to your RSC to have the bracelet resized and ask for a written quote for a service, as a courtesy they will check it over for you, you may have to pay for this service however then you will be registered as the owner so there is a plus side to paying for this.

[jimcameron]

I received a DJ36 as a gift. It was last serviced by RSC in 2000. It is currently at a 100% Rolex trained independent that I trust 100%. He attempted to remove a link and had to heat the jubilee with a lighter. That didn't work, and he now has to remove the bracelet and heat it up on some hot plate type device. He told me he has to do this frequently as RCS will utilize some LockTight type adhesive to prevent the screws backing out. He advised that he heats the bracelet up to 300+F and that will do the trick. I would let a professional do it.

[Seibei]

Good grief... Do it yourself, or risk grief and damage. The procedure is simple and the tools are easy to get.

Your watch does not come with a box or papers. Worst case scenario is that you hand it to your AD, the watch comes up on the Rolex stolen database and you walk out of there with no watch. They may drop the watch, scratch it, or who knows what.

Regarding that good feeling everyone is supposed to get from walking into an AD, you can live without it, believe me.

[joli160]

Not again, a member going to get his watch damaged by the clumsy AD sales assistant.

It's an easy and fun DIY Tom, heat up the threaded side with a lighter to loosen up the loctite if any. This is where it goes wrong quite often.
Use a good fitting hollow ground 1.6mm screwdriver which fits without play in the groove and turn ccw. The carbon from the lighter can be easily washed off with a toothbrush and dishwashing liquid.

[SubMarine]

Originally Posted by Seibei

Good grief... Do it yourself, or risk grief and damage. The procedure is simple and the tools are easy to get.

Your watch does not come with a box or papers. Worst case scenario is that you hand it to your AD, the watch comes up on the Rolex stolen database and you walk out of there with no watch. They may drop the watch, scratch it, or who knows what.

Regarding that good feeling everyone is supposed to get from walking into an AD, you can live without it, believe me.

Solid advice.

[uhren917]

i am fairly mechanically inclined, but I still ended up scratching my link a little on a resizing effort even with a professional set of watch tools. Oh well.

I think offering them a ten(er) or 2 ten(ers) would be fair though there are no guarantees they wont scratch it either.