ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Mike Lee · 28 February 2009, 12:49 AM

I purchased a Rolex Submariner new from an authorised dealer in Great Yarmouth last May.

The watch was losing approx 6 seconds a day and I returned it in June to be checked over and the shop corrected the timing so that it was gaining approx 2 seconds per day which I found ok.

Last week for some unknown reason the watch began spontaneously to lose 16 seconds per day and when I spoke to Rolex they asked me to send the watch back via the Dealer for examination.

As I am likely to be without the watch for some 2-3 weeks I am very surprised that a watch of this alleged quality should behave in this manner and I am obviously worried that it may re-occur.

Can anybody advise me why this would happen - is this common with Rolex and if it happens again within the warranty period should I ask for a new watch?

Any advice would be greatly appreciated.

Mosco · 28 February 2009, 01:21 AM

Mike - 16 seconds a day is within COSC allowed variances, so it is OK. You have to remember that a mechanical watch will have gravity affecting it differently in different positions. I think what you're seeing ain't bad. Quartz will have the ultimate accuracy, but we don't want that, do we

wantonebad · 28 February 2009, 01:48 AM

Greg, the COSC stadards I've read state -4/+6 seconds per day? 16 seconds shouldn't be tolerated IMHO, I'd have the watch regulated at the very least and possibly serviced.

Mike, unfortunately these things happen, it is a machanical piece after all, however rest assured that once its fixed, it will be FIXED. Rolex has great technicians and they will correct the issue.

Mirx · 1 March 2009, 04:55 AM

A consistent loss of 16 seconds a day is way out of the COSC and, therefore, unacceptable and cannot be justified.

On a positive note, I too had a very similar experience when my watch needed to be regulated twice by the RSC. After that it ran +2 sec. a day for years.

Have it regulated once again and hopefully that should be the end of it.

I would recommend sending it straight to the RSC (London or Bexley) to save time.

Mike Lee · 28 February 2009, 06:05 PM

Thanks for the info - My real worry was that the watch had been working perfectly since June and suddenly started to lose literally overnight.

The Dealer said "Rolex should never lose time, gaining only" .

Guess I'll wait and see.

Thanks again.

Incidentally, watonebad's photo is my very model.

padi56 · 1 March 2009, 05:10 AM

Quote:

Originally Posted by Mike Lee

I purchased a Rolex Submariner new from an authorised dealer in Great Yarmouth last May.

The watch was losing approx 6 seconds a day and I returned it in June to be checked over and the shop corrected the timing so that it was gaining approx 2 seconds per day which I found ok.

Last week for some unknown reason the watch began spontaneously to lose 16 seconds per day and when I spoke to Rolex they asked me to send the watch back via the Dealer for examination.

As I am likely to be without the watch for some 2-3 weeks I am very surprised that a watch of this alleged quality should behave in this manner and I am obviously worried that it may re-occur.

Can anybody advise me why this would happen - is this common with Rolex and if it happens again within the warranty period should I ask for a new watch?

Any advice would be greatly appreciated.

Well first its very unusual for any watch to suddenly start to loose that much time.Have you changed your wearing habits or even dropped your watch.Before you run off to get it regulated try giving your watch a full wind 40 crown turns.Then set watch with a reliable accurate time source wear as normal check time daily for a week with same time source average out the plus or minus over the week.If out of COSC spec then its time to have it checked or re-regulated.

bdub · 1 March 2009, 06:59 AM

If it hasn't been dropped or had a harsh hit, it could have become magnetized. Although not common, this has been known to happen. Most watchmakers can easily correct this problem.

padi56 · 2 March 2009, 03:02 AM

Quote:

Originally Posted by bdub

If it hasn't been dropped or had a harsh hit, it could have become magnetized. Although not common, this has been known to happen. Most watchmakers can easily correct this problem.

If any watch becomes temporally magnetised it would run very very erratic speed up by a lot more than a few seconds or come to a complete stop.

bdub · 2 March 2009, 07:21 AM

Quote:

Originally Posted by padi56

If any watch becomes temporally magnetised it would run very very erratic speed up by a lot more than a few seconds or come to a complete stop.

Good to know!

Mike Lee · 2 March 2009, 03:55 AM

Thanks for all the replies.

No I haven't dropped or damaged the watch but I am interested in the 40 winds comment and would like to know how long a Rolex will run when it is not worn and any further advice greatly appreciated.

I supposed I could start a new thread if necessary.

Tools · 2 March 2009, 10:45 AM

Quote:

Originally Posted by Mike Lee

Thanks for all the replies.

No I haven't dropped or damaged the watch but I am interested in the 40 winds comment and would like to know how long a Rolex will run when it is not worn and any further advice greatly appreciated.

I supposed I could start a new thread if necessary.

A fully wound Rolex should run on the counter, untouched, for 40 to 50 hours....

aelvin · 2 March 2009, 07:11 AM

-16 seconds definitely out of COSC tolerance. I will send it back and see what RSC says.

28 February 2009, 12:49 AM	#1
Mike Lee "TRF" Member Join Date: Aug 2008 Location: suffolk Watch: GMT Master II Posts: 12	Rolex Submariner losing time I purchased a Rolex Submariner new from an authorised dealer in Great Yarmouth last May. The watch was losing approx 6 seconds a day and I returned it in June to be checked over and the shop corrected the timing so that it was gaining approx 2 seconds per day which I found ok. Last week for some unknown reason the watch began spontaneously to lose 16 seconds per day and when I spoke to Rolex they asked me to send the watch back via the Dealer for examination. As I am likely to be without the watch for some 2-3 weeks I am very surprised that a watch of this alleged quality should behave in this manner and I am obviously worried that it may re-occur. Can anybody advise me why this would happen - is this common with Rolex and if it happens again within the warranty period should I ask for a new watch? Any advice would be greatly appreciated.

28 February 2009, 01:21 AM	#2
Mosco "TRF" Member Join Date: Dec 2008 Real Name: Greg Location: Cincinnati Watch: I like to... Posts: 18,567	Mike - 16 seconds a day is within COSC allowed variances, so it is OK. You have to remember that a mechanical watch will have gravity affecting it differently in different positions. I think what you're seeing ain't bad. Quartz will have the ultimate accuracy, but we don't want that, do we __________________ Instagram - @CaliberSwiss *“A man who procrastinates in his choosing will inevitably have his choice made for him by circumstance.” - Hunter S. Thompson*

28 February 2009, 01:48 AM	#3
wantonebad 2024 SubLV41 Pledge Member Join Date: Nov 2007 Location: USA Watch: 126600, 116500LN Posts: 12,849	Greg, the COSC stadards I've read state -4/+6 seconds per day? 16 seconds shouldn't be tolerated IMHO, I'd have the watch regulated at the very least and possibly serviced. Mike, unfortunately these things happen, it is a machanical piece after all, however rest assured that once its fixed, it will be FIXED. Rolex has great technicians and they will correct the issue. __________________ "I'm kind of a big deal... on a fairly irrelevant social media site that falsely inflates my fragile ego"

1 March 2009, 04:55 AM	#4
Mirx "TRF" Member Join Date: Jan 2009 Location: UK Watch: RLX Posts: 437	A consistent loss of 16 seconds a day is way out of the COSC and, therefore, unacceptable and cannot be justified. On a positive note, I too had a very similar experience when my watch needed to be regulated twice by the RSC. After that it ran +2 sec. a day for years. Have it regulated once again and hopefully that should be the end of it. I would recommend sending it straight to the RSC (London or Bexley) to save time.

28 February 2009, 06:05 PM	#5
Mike Lee "TRF" Member Join Date: Aug 2008 Location: suffolk Watch: GMT Master II Posts: 12	Thanks for the info - My real worry was that the watch had been working perfectly since June and suddenly started to lose literally overnight. The Dealer said "Rolex should never lose time, gaining only" . Guess I'll wait and see. Thanks again. Incidentally, watonebad's photo is my very model.

1 March 2009, 06:59 AM	#7
bdub "TRF" Member Join Date: Feb 2009 Location: usa Posts: 6	If it hasn't been dropped or had a harsh hit, it could have become magnetized. Although not common, this has been known to happen. Most watchmakers can easily correct this problem.

2 March 2009, 03:55 AM	#10
Mike Lee "TRF" Member Join Date: Aug 2008 Location: suffolk Watch: GMT Master II Posts: 12	Thanks for all the replies. No I haven't dropped or damaged the watch but I am interested in the 40 winds comment and would like to know how long a Rolex will run when it is not worn and any further advice greatly appreciated. I supposed I could start a new thread if necessary.

2 March 2009, 07:11 AM	#12
aelvin "TRF" Member Join Date: Jul 2008 Real Name: Aelvin Location: Princeton, NJ Posts: 330	-16 seconds definitely out of COSC tolerance. I will send it back and see what RSC says.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)