ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

btwistround · 17 July 2022, 07:11 AM

Obviously I'll be heading to a watchmaker to look at this issue. Likely independent for speed and ease unless it's a tricky issue, then back to my AD.

My Black Bay GMT (purchased January 2019), for the past week or so has been running erractically. It's pretty much my daily wearer, apart from weekend G-Shocking.

Even done a full wind daily and multiple times a day, around 60-70 winds.

But it doesn't hold power and after a few hours it just dies and needs winding to start up again.

Have checked with the Lepsi app for magnetism, but nothing is showing up. I'm no pro though.

Anyone any ideas?

JMGoodnight369 · 17 July 2022, 07:16 AM

Sounds like a mainspring problem to me. Is it not in warranty still? I can’t remember what the Tudor warranty length.

btwistround · 17 July 2022, 07:24 AM

Quote:

Originally Posted by JMGoodnight369

Sounds like a mainspring problem to me. Is it not in warranty still? I can’t remember what the Tudor warranty length.

I think it might still be under warranty. 5yrs I think.

JMGoodnight369 · 17 July 2022, 07:35 AM

Quote:

Originally Posted by btwistround

I think it might still be under warranty. 5yrs I think.

I thought it was. So you’re still under warranty so I would send it in to Tudor. Yeah it will take longer but could end up saving you a solid chunk of money.

Bustelo · 17 July 2022, 07:42 AM

PR issues point to issues us independents may have an issue resolving with no parts access. This one may unfortunately be best served going into Tudor.

Calatrava r · 17 July 2022, 09:55 AM

Yes, send it to Tudor. I would also recheck the magnetism first with a good watch repair person. That is a simple fix.

Turbo Racer · 17 July 2022, 10:03 AM

I would definitely send it in to Tudor.

kieselguhr · 17 July 2022, 10:09 AM

Send it to RSC. The Tudor mainspring is Silicone and can’t be magnetized

Dirt · 17 July 2022, 05:43 PM

Quote:

Originally Posted by kieselguhr

Send it to RSC. The Tudor mainspring is Silicone and can’t be magnetized

Silicon Mainspring?
Really?

PanosI · 17 July 2022, 06:51 PM

It's definitely a problem with the calibre.

Not so known as the "slow date change/stuck" problem because people can have the watch for years and never realize it because the way of wearing it or resting it.

My favorite Tudor P01 Commando had it.

It took me a month and extensive daily testing to nail it.

When I leave it with a crown up or dial down stops although it is fully wound (40 full 360 wounds) from 3 to 10 hours after wounding.

So, if I left my watch dial up I would never understand it.

When I swung it and started again, it continued and exhausted all 70 hours of its autonomy.

I feel sorry for you OP and i am almost sure that Tudor will replace the whole calibre.

mountainjogger · 17 July 2022, 08:22 PM

Someone correct me if I am wrong, but do not think an independent can work on this movement.

WatchSmith · 17 July 2022, 11:27 AM

Could be the auto wind module. If the reversing wheels aren’t functioning properly it can cause a fully wound movement to stop.

You · 17 July 2022, 04:28 PM

It will need to be serviced :(

Andad · 17 July 2022, 04:36 PM

See post 2.

brandrea · 17 July 2022, 08:50 PM

I hope you get it sorted OP, that’s frustrating.

m j b · 17 July 2022, 09:57 PM

Sorry to hear of this. If it's under warranty, send it back.

btwistround · 18 July 2022, 08:21 AM

thanks for the suggestions.

popped into my AD and it's off to Tudor service centre. Will update with what they find when I know.

TunaTuna · 18 July 2022, 09:38 AM

Once you get it back, I'd stop winding it daily and several times a day. That could have contributed to your problem

Ksbi · 18 July 2022, 10:02 AM

Sorry about that send it to RSC

17 July 2022, 07:11 AM	#1
btwistround "TRF" Member Join Date: Mar 2021 Location: Liverpool Posts: 139	WTH is going on? Obviously I'll be heading to a watchmaker to look at this issue. Likely independent for speed and ease unless it's a tricky issue, then back to my AD. My Black Bay GMT (purchased January 2019), for the past week or so has been running erractically. It's pretty much my daily wearer, apart from weekend G-Shocking. Even done a full wind daily and multiple times a day, around 60-70 winds. But it doesn't hold power and after a few hours it just dies and needs winding to start up again. Have checked with the Lepsi app for magnetism, but nothing is showing up. I'm no pro though. Anyone any ideas?

17 July 2022, 08:22 PM	#11
mountainjogger 2024 Pledge Member Join Date: Aug 2010 Real Name: H Location: North Carolina Watch: M99230B-0008 Posts: 5,675	Someone correct me if I am wrong, but do not think an independent can work on this movement. __________________ The King of Cool.

17 July 2022, 04:36 PM	#14
Andad 2024 SubLV41 Pledge Member Join Date: Nov 2006 Real Name: Eddie Location: Australia Watch: A few. Posts: 37,533	See post 2. __________________ E

17 July 2022, 09:57 PM	#16
m j b "TRF" Member Join Date: Mar 2011 Real Name: Michael Location: RTP, NC, USA Watch: ♕& Ω Posts: 5,221	Sorry to hear of this. If it's under warranty, send it back. __________________ Enjoy life - it has an expiration date. Disclaimer: Please note that the avatar is not an accurate representation of how I look. The camera adds 10 pounds...

17 July 2022, 07:16 AM	#2
JMGoodnight369 "TRF" Member Join Date: Dec 2018 Location: Georgia USA Posts: 373	Sounds like a mainspring problem to me. Is it not in warranty still? I can’t remember what the Tudor warranty length.

17 July 2022, 07:42 AM	#5
Bustelo "TRF" Member Join Date: Aug 2008 Location: FL Watch: maker Posts: 177	PR issues point to issues us independents may have an issue resolving with no parts access. This one may unfortunately be best served going into Tudor.

17 July 2022, 09:55 AM	#6
Calatrava r 2024 SubLV41 Pledge Member Join Date: Mar 2017 Location: United States Watch: Rolex and Patek Posts: 11,427	Yes, send it to Tudor. I would also recheck the magnetism first with a good watch repair person. That is a simple fix.

17 July 2022, 10:03 AM	#7
Turbo Racer "TRF" Member Join Date: May 2021 Location: USA Watch: Rolex and Patek Posts: 1,027	I would definitely send it in to Tudor.

17 July 2022, 10:09 AM	#8
kieselguhr "TRF" Member Join Date: May 2013 Real Name: Nick Location: Las Vegas Watch: 1601 Posts: 10,623	Send it to RSC. The Tudor mainspring is Silicone and can’t be magnetized

17 July 2022, 06:51 PM	#10
PanosI 2024 Pledge Member Join Date: May 2008 Real Name: Panos Location: Athens, Greece Watch: 16710 Posts: 8,704	It's definitely a problem with the calibre. Not so known as the "slow date change/stuck" problem because people can have the watch for years and never realize it because the way of wearing it or resting it. My favorite Tudor P01 Commando had it. It took me a month and extensive daily testing to nail it. When I leave it with a crown up or dial down stops although it is fully wound (40 full 360 wounds) from 3 to 10 hours after wounding. So, if I left my watch dial up I would never understand it. When I swung it and started again, it continued and exhausted all 70 hours of its autonomy. I feel sorry for you OP and i am almost sure that Tudor will replace the whole calibre.

17 July 2022, 11:27 AM	#12
WatchSmith 2024 Pledge Member Join Date: Jan 2009 Location: USA Posts: 702	Could be the auto wind module. If the reversing wheels aren’t functioning properly it can cause a fully wound movement to stop.

17 July 2022, 04:28 PM	#13
You "TRF" Member Join Date: Jul 2016 Location: Beverly Hills, CA Watch: Platinum Daytona Posts: 785	It will need to be serviced :(

17 July 2022, 08:50 PM	#15
brandrea 2024 SubLV41 Pledge Member Join Date: Jul 2013 Real Name: Brian (TBone) Location: canada Watch: es make me smile Posts: 78,126	I hope you get it sorted OP, that’s frustrating.

18 July 2022, 08:21 AM	#17
btwistround "TRF" Member Join Date: Mar 2021 Location: Liverpool Posts: 139	thanks for the suggestions. popped into my AD and it's off to Tudor service centre. Will update with what they find when I know.

18 July 2022, 09:38 AM	#18
TunaTuna 2024 Pledge Member Join Date: Jun 2021 Location: Merica Posts: 1,337	Once you get it back, I'd stop winding it daily and several times a day. That could have contributed to your problem

18 July 2022, 10:02 AM	#19
Ksbi Banned Join Date: Aug 2020 Location: Usa Watch: On my wrist Posts: 207	Sorry about that send it to RSC

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)