ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

EdChoi · 8 October 2011, 02:49 PM

Hey guys, just wanted to see what you guys are wearing for wedding bands.

Are the majority of RF guys wearing 4.5-5 mm bands or 6?

Or if you have something unique, post up a pic!

Thanks guys.

Andad · 8 October 2011, 05:09 PM

First one was 10mm YG, then 5mm YG, 3mm YG and 7mm S/S.
Might get the YG/WG combo in either 5mm or 6mm next.

apeogre · 8 October 2011, 09:14 PM

Quote:

Originally Posted by directioneng

First one was 10mm YG, then 5mm YG, 3mm YG and 7mm S/S.
Might get the YG/WG combo in either 5mm or 6mm next.

That's a lot of weddings. Who's the next wife?

gettocard · 8 October 2011, 09:34 PM

5 mm YG. Way too classic,I actually wanted something more "trendy" but the classic one doesn't get in the way with my active lifestyle and it'll never run out of style.

Andad · 8 October 2011, 09:35 PM

Only three - the s/s one was a spare.

BigMac53 · 8 October 2011, 09:58 PM

I wear a 5MM pipe cut wg band. I like it because its a little different from what i see a lot of guys wearing these days.. I will try and upload a pic when i get to my computer.

Sent from my SCH-I510 using Tapatalk

gmh1013 · 9 October 2011, 02:40 AM

since i dont like rings much...4mm yg here

jatco · 9 October 2011, 04:26 AM

My daily band is a custom 'dual' band, ttl 4mm using my Dad's and my Father-in-law's band made into 1.
Going out I add our original design ring, 25+ years ago, which I just recently had redone and 'beefed' up a bit...

BarkMaster · 9 October 2011, 04:38 AM

8mm YG with tension set 1 carat solitare (yes, that is MY ring; not the wife's

)

Dr.Brian · 9 October 2011, 05:11 AM

That's Texas for ya'!

ducatidoc · 9 October 2011, 08:44 AM

Quote:

Originally Posted by BarkMaster

8mm YG with tension set 1 carat solitare (yes, that is MY ring; not the wife's

)

rfknauss · 9 October 2011, 09:50 AM

Eddie ...... platinum and gold for me.

gmh1013 · 9 October 2011, 10:59 AM

Quote:

Originally Posted by Dr.Brian

That's Texas for ya'!

x2

oneillba · 9 October 2011, 11:55 AM

I'll keep checking back for responses. I'm in the market for a wedding rings too!

CoopJr · 9 October 2011, 12:03 PM

A plain band of white gold.

BarkMaster · 9 October 2011, 12:07 PM

Quote:

Originally Posted by Dr.Brian

That's Texas for ya'!

gmh1013 · 9 October 2011, 12:27 PM

delete please............................................ .................................................. .................................................. .................................................. ..........

pacifichrono · 9 October 2011, 01:05 PM

Mine is 6mm YG, including very fine coin-edge ridging on the outside edges. My fingers are very thin - - I would have gone to 7-7.5mm with thicker fingers.

BarkMaster · 9 October 2011, 11:23 PM

Quote:

Originally Posted by pacifichrono

Mine is 6mm YG, including very fine coin-edge ridging on the outside edges. My fingers are very thin - - I would have gone to 7-7.5mm with thicker fingers.

Almost sounds like BARK!

I have the same finish on the ring I wear on the other hand.

Dan2010 · 9 October 2011, 11:39 PM

8MM tungston carbide, matches my ss Sub

Dan Pierce · 9 October 2011, 11:42 PM

Poor man's platinum, like my watches.
dP

Boopie · 11 October 2011, 02:05 PM

My husband picked out a titanium band. We have been married 20 years, and I guess my husband still had some baby fat, because his gold band got too band. It kept falling off of his finger, so I told him to pick out whatever he wanted. He found one on a reputable Internet site.

pacifichrono · 11 October 2011, 03:14 PM

Quote:

Originally Posted by BarkMaster

Almost sounds like BARK!

I have the same finish on the ring I wear on the other hand.

Looks like this, except yellow gold:

Timber Loftis · 11 October 2011, 06:44 PM

I have not clue what size my wedding band is. It's WG, that's about all I know. Oh, and it matches steel watches.

8 October 2011, 02:49 PM	#1
EdChoi "TRF" Member Join Date: May 2007 Real Name: Eddie Location: VA Posts: 356	Wedding Band Question Hey guys, just wanted to see what you guys are wearing for wedding bands. Are the majority of RF guys wearing 4.5-5 mm bands or 6? Or if you have something unique, post up a pic! Thanks guys. __________________ instaGram: ehDchoi

8 October 2011, 05:09 PM	#2
Andad 2024 SubLV41 Pledge Member Join Date: Nov 2006 Real Name: Eddie Location: Australia Watch: A few. Posts: 37,534	First one was 10mm YG, then 5mm YG, 3mm YG and 7mm S/S. Might get the YG/WG combo in either 5mm or 6mm next. __________________ E

8 October 2011, 09:35 PM	#5
Andad 2024 SubLV41 Pledge Member Join Date: Nov 2006 Real Name: Eddie Location: Australia Watch: A few. Posts: 37,534	Only three - the s/s one was a spare. __________________ E

9 October 2011, 02:40 AM	#7
gmh1013 Banned Join Date: Jun 2008 Real Name: greg Location: Tempe AZ Watch: GMT Posts: 5,703	I wanted something cheap for me since i dont like rings much...4mm yg here

9 October 2011, 05:11 AM	#10
Dr.Brian 2024 SubLV41 Pledge Member Join Date: Sep 2009 Real Name: Brian Location: CA dreamin' Watch: ing the market. Posts: 5,906	That's Texas for ya'! __________________ -Brian AUDENTES FORTUNA IUVAT 十人十色

8 October 2011, 09:34 PM	#4
gettocard Banned Join Date: Dec 2008 Real Name: Andy Location: EU Watch: them come and go.. Posts: 2,052	5 mm YG. Way too classic,I actually wanted something more "trendy" but the classic one doesn't get in the way with my active lifestyle and it'll never run out of style.

8 October 2011, 09:58 PM	#6
BigMac53 "TRF" Member Join Date: Aug 2010 Real Name: Jon Location: CT Posts: 729	I wear a 5MM pipe cut wg band. I like it because its a little different from what i see a lot of guys wearing these days.. I will try and upload a pic when i get to my computer. Sent from my SCH-I510 using Tapatalk

9 October 2011, 11:55 AM	#14
oneillba "TRF" Member Join Date: Apr 2008 Real Name: Brian Location: Hamilton, MI USA Watch: My beloved TT DJ Posts: 3,831	I'll keep checking back for responses. I'm in the market for a wedding rings too! __________________ My Trusty TT DJ

9 October 2011, 12:03 PM	#15
CoopJr "TRF" Member Join Date: Oct 2007 Real Name: Coop Location: U.S.A. Watch: Subs Posts: 6,455	A plain band of white gold.

9 October 2011, 12:27 PM	#17
gmh1013 Banned Join Date: Jun 2008 Real Name: greg Location: Tempe AZ Watch: GMT Posts: 5,703	Everybody has a fav place but what is your least fav place? delete please............................................ .................................................. .................................................. .................................................. ..........

9 October 2011, 01:05 PM	#18
pacifichrono "TRF" Member Join Date: Aug 2011 Real Name: Tom Location: San Diego Watch: 1968 GMT 1675 Posts: 1,059	Mine is 6mm YG, including very fine coin-edge ridging on the outside edges. My fingers are very thin - - I would have gone to 7-7.5mm with thicker fingers. __________________ Regards from Sunny San Diego..........Tom

9 October 2011, 11:39 PM	#20
Dan2010 "TRF" Member Join Date: Apr 2010 Location: South Carolina Watch: Panerai 914 Posts: 6,540	8MM tungston carbide, matches my ss Sub

11 October 2011, 02:05 PM	#22
Boopie "TRF" Member Join Date: Aug 2007 Location: Beverly Hills, CA Watch: Yachtmaster Posts: 3,952	My husband picked out a titanium band. We have been married 20 years, and I guess my husband still had some baby fat, because his gold band got too band. It kept falling off of his finger, so I told him to pick out whatever he wanted. He found one on a reputable Internet site.

11 October 2011, 06:44 PM	#24
Timber Loftis "TRF" Member Join Date: Nov 2007 Real Name: Jon Location: Chicago Watch: IIc,DJII,P244,A1-Z Posts: 2,857	I have not clue what size my wedding band is. It's WG, that's about all I know. Oh, and it matches steel watches.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode