ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

paleozoic01 · 16 October 2007, 04:54 AM

Thanks for info you all! I read that RWSC may not take it but I explicitly told the lady on the phone it was a 5512, then she asked someone if they would service it and she came back and said they would....she also said if there is any red lettering they wouldnt even touch it! If perchance they do not and send it back anyone here have any suggestion on who to send it too???

PS here are some pics of the 5512...
not bad for serving two terms in vietanam and 25 years of photojournalism!!

Tools · 16 October 2007, 04:58 AM

Welcome aboard.

There are some good watchmakers that vintage collectors use..

Hang in and some of our fine members will give you some courses to chart..

SPACE-DWELLER · 16 October 2007, 05:05 AM

Welcome to TRF!

I would contact Mr. Michael Young and hear what he can do for you:

www.classicwatchparts.com

Good luck!

YuppieKid · 16 October 2007, 05:17 AM

Quote:

Originally Posted by paleozoic01

Thanks for info you all! I read that RWSC may not take it but I explicitly told the lady on the phone it was a 5512, then she asked someone if they would service it and she came back and said they would....she also said if there is any red lettering they wouldnt even touch it! If perchance they do not and send it back anyone here have any suggestion on who to send it too???

PS here are some pics of the 5512...
not bad for serving two terms in vietanam and 25 years of photojournalism!!

from qualitytyme.net. They servced it to perfection. Give them a shout ( www.qualitytyme.net ). John Brozek is the point of contact over there (Florida).

Alex Stylianou · 16 October 2007, 06:35 AM

RSC time.

mike · 16 October 2007, 07:37 AM

Congrats on the 5512.

I'm sure you'll get a lot of opinions on what to do so I'll give you my thoughts.

It appears you have a very lovely dial and the case is in good shape. If you send it to RSC at a minimum they are going to force a hands change. They will replace with luminova. The bracelet actually doesn't look to bad, but I can't figure out what happened to the endlinks and the clasp looks broken? RSC will want to replace. The bezel insert is lacking a pearl and RSC will want to replace.
IF I were to sent the watch to an RSC I would remove the bracelet and repair later. The riveted bracelets are $$$ in their own right. I would fit a current replacement 93150 with 580s -- cost $850. I would also remove the orginal insert and have them fit a replacement (look for a pearl later for the orginal) -cost about $51. Service will run about $450- 500. AND THEY WOULD NOT TOUCH THE DIAL!!
Hands are something you'll have to live with if done by RSC.

Option 2. Send it here,
http://www.watchmakers.com/index.html

Bob has serviced many collectors watches, his service is fantastic, and he may have a set of tritium hands that would match as well as addressing the bezel pearl.

Good luck!

Subfiend · 16 October 2007, 08:16 AM

I use Peter Whittle of Whittle's Watch Works in Wayne, PA for all my vintage work. (That's too many Ws, but you get the point.) He has serviced my 5512, 5513 and 1675.

16 October 2007, 04:54 AM	#1
paleozoic01 Member Join Date: Oct 2007 Real Name: Joshua Location: Texas Posts: 20	5512 pics Thanks for info you all! I read that RWSC may not take it but I explicitly told the lady on the phone it was a 5512, then she asked someone if they would service it and she came back and said they would....she also said if there is any red lettering they wouldnt even touch it! If perchance they do not and send it back anyone here have any suggestion on who to send it too??? PS here are some pics of the 5512... not bad for serving two terms in vietanam and 25 years of photojournalism!! Attached Images

16 October 2007, 05:05 AM	#3
SPACE-DWELLER "TRF" Member Join Date: Apr 2007 Real Name: Bo Location: Denmark Watch: Rolex, of course! Posts: 22,436	Welcome to TRF! I would contact Mr. Michael Young and hear what he can do for you: www.classicwatchparts.com Good luck! __________________ With kind regards, Bo LocTite 221: The Taming Of The Screw...

16 October 2007, 08:16 AM	#7
Subfiend "TRF" Member Join Date: Jan 2006 Location: Outside Watch: Isn't it obvious? Posts: 1,926	I use Peter Whittle of Whittle's Watch Works in Wayne, PA for all my vintage work. (That's too many Ws, but you get the point.) He has serviced my 5512, 5513 and 1675. __________________ Subfiend

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

16 October 2007, 04:58 AM	#2
Tools TRF Moderator & 2024 SubLV41 Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,516	Welcome aboard. There are some good watchmakers that vintage collectors use.. Hang in and some of our fine members will give you some courses to chart..

16 October 2007, 06:35 AM	#5
Alex Stylianou "TRF" Member Join Date: Jan 2007 Location: UK Posts: 1,785	RSC time.

16 October 2007, 07:37 AM	#6
mike "TRF" Member Join Date: Jul 2005 Posts: 22,683	Congrats on the 5512. I'm sure you'll get a lot of opinions on what to do so I'll give you my thoughts. It appears you have a very lovely dial and the case is in good shape. If you send it to RSC at a minimum they are going to force a hands change. They will replace with luminova. The bracelet actually doesn't look to bad, but I can't figure out what happened to the endlinks and the clasp looks broken? RSC will want to replace. The bezel insert is lacking a pearl and RSC will want to replace. IF I were to sent the watch to an RSC I would remove the bracelet and repair later. The riveted bracelets are $$$ in their own right. I would fit a current replacement 93150 with 580s -- cost $850. I would also remove the orginal insert and have them fit a replacement (look for a pearl later for the orginal) -cost about $51. Service will run about $450- 500. AND THEY WOULD NOT TOUCH THE DIAL!! Hands are something you'll have to live with if done by RSC. Option 2. Send it here, http://www.watchmakers.com/index.html Bob has serviced many collectors watches, his service is fantastic, and he may have a set of tritium hands that would match as well as addressing the bezel pearl. Good luck!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)