ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

SubKing · 9 June 2008, 05:40 AM

Hey all,
While I have seen many panerai bracelet models Not having this problem, mine does..

I wanted to know if these gaps where normal? I have a new j series and the gaps I am speaking of are where the end links connect to the case. there is a lot of play in the end links and does not look so hot when wearing my pam on the bracelet.

meloncap78 · 9 June 2008, 05:49 AM

Sharp looking watch! Bent pins??

ezod · 9 June 2008, 06:16 AM

Yeah, like what meloncap said. Bent springbars may be the issue. The endlinks should be flush with the case.

Mrdi · 9 June 2008, 06:19 AM

Someone please post a Pam w bracelet to show normal gap and alleviate Sub's anxiety.

pwrslider · 9 June 2008, 08:18 AM

Quote:

Originally Posted by meloncap78

Sharp looking watch! Bent pins??

I agree.......pins are cheap to get....then get rid of the bracelet and start collecting straps!

SubKing · 9 June 2008, 08:47 AM

not bent pins, i had a case replacment and i think the holes in the lugs are a little off...

hienpham04 · 9 June 2008, 09:10 AM

Did you buy the PAM from an AD? Make sure it's not aftermarket parts.

Mr_T · 9 June 2008, 09:30 AM

Quote:

Originally Posted by Mrdi

Someone please post a Pam w bracelet to show normal gap and alleviate Sub's anxiety.

from the PAM220 pic via www.panerai.com

Mr_T · 9 June 2008, 09:35 AM

Quite honesty not too many will be noticing the gap, they should and will be noticing everything else the watch screams out at you.

watchboy · 10 June 2008, 07:53 AM

Which model is that? PAM240???

This is what I know, those PANERAI models that does not originally come with a bracelet, the case is slightly different from those models with bracelets originally. Except for some of the submersible models like the PAM24, PAM25, PAM199 for eg, OEM bracelets will fit them nicely.

In short, you have to see if the model comes with bracelet originally or not.

But there are people saying after market bracelets can fit most models too.

SubKing · 10 June 2008, 09:44 AM

no, it is a 279 and it came on a bracelet. it is all Original... I had a case change done under warrenty and when it came back it had the gaps..

Mr_T · 10 June 2008, 12:14 PM

Quote:

Originally Posted by SubKing

no, it is a 279 and it came on a bracelet. it is all Original... I had a case change done under warrenty and when it came back it had the gaps..

Send it back and have them fix it if it really bothers you. Remember you are entitled to get what you paid for, you did not pay for gaps.

Felly Jr. · 10 June 2008, 12:47 PM

Quote:

Originally Posted by Mr_T

Send it back and have them fix it if it really bothers you. Remember you are entitled to get what you paid for, you did not pay for gaps.

What he said..........

SubKing · 10 June 2008, 01:20 PM

thanks guys,

I will send it back i'm working with someone at panerai in NY office to help speed things up as I have fingerprints inside the crystal, caseback scratches tool marks on the side of the case and crown gaurd and light scratches on the bracelet like it has been worn for a couple months and please keep in mind when I sent it in, it was perfect brand new condition. only got 2 weeks of light rist time as my submariner is my everyday watch which looks more new than my panerai at this point. haha... talk about a nightmare.. no to add the gaps in my links... I'm asking for a watch replacment at this point but i don't think it will happen. So they will prob just keep taking apart and tinkering with what was a brand new watch but it will never be the same and I told them that... I also gave panerai as many before and after photo's that I could find on my computer to help my situation some... we will see what happens.. ill keep you all posted on the outcome... So far the ppl at the TX service center are of no help,short over the phone,and the director john sokol does not return phone calls ever. nice way to treat customers.. I guess it isn't always true you get what you pay for when it comes to panerai's.. it hurts to even wear my watch at this point so it has been sitting back in the box at this point. :*(
losing my watch for months in service to come back worse is not what i had in mind to enjoy a watch i have never gotten to enjoy.

9 June 2008, 05:40 AM	#1
SubKing "TRF" Member Join Date: Feb 2008 Location: USA Watch: where do i start?? Posts: 3,254	Bracelet End Link Gaps.. Normal? Hey all, While I have seen many panerai bracelet models Not having this problem, mine does.. I wanted to know if these gaps where normal? I have a new j series and the gaps I am speaking of are where the end links connect to the case. there is a lot of play in the end links and does not look so hot when wearing my pam on the bracelet.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

9 June 2008, 05:49 AM	#2
meloncap78 "TRF" Member Join Date: Mar 2008 Real Name: Joshua Location: Syracuse, NY Watch: LV C Posts: 2,204	Sharp looking watch! Bent pins??

9 June 2008, 06:16 AM	#3
ezod "TRF" Member Join Date: May 2008 Location: Chicago, Illinois Watch: SeaDweller Posts: 67	Yeah, like what meloncap said. Bent springbars may be the issue. The endlinks should be flush with the case.

9 June 2008, 06:19 AM	#4
Mrdi Banned Join Date: Mar 2006 Location: PA Posts: 3,478	Someone please post a Pam w bracelet to show normal gap and alleviate Sub's anxiety.

9 June 2008, 08:47 AM	#6
SubKing "TRF" Member Join Date: Feb 2008 Location: USA Watch: where do i start?? Posts: 3,254	not bent pins, i had a case replacment and i think the holes in the lugs are a little off...

9 June 2008, 09:10 AM	#7
hienpham04 "TRF" Member Join Date: Nov 2007 Real Name: Hien Q Pham Location: Orlando, FL Watch: Rolex President Posts: 595	Did you buy the PAM from an AD? Make sure it's not aftermarket parts.

9 June 2008, 09:35 AM	#9
Mr_T Member Join Date: May 2008 Location: New Jersey Posts: 54	Quite honesty not too many will be noticing the gap, they should and will be noticing everything else the watch screams out at you.

10 June 2008, 07:53 AM	#10
watchboy "TRF" Member Join Date: Oct 2006 Real Name: Jacky Location: Watch World Posts: 244	Which model is that? PAM240??? This is what I know, those PANERAI models that does not originally come with a bracelet, the case is slightly different from those models with bracelets originally. Except for some of the submersible models like the PAM24, PAM25, PAM199 for eg, OEM bracelets will fit them nicely. In short, you have to see if the model comes with bracelet originally or not. But there are people saying after market bracelets can fit most models too.

10 June 2008, 09:44 AM	#11
SubKing "TRF" Member Join Date: Feb 2008 Location: USA Watch: where do i start?? Posts: 3,254	no, it is a 279 and it came on a bracelet. it is all Original... I had a case change done under warrenty and when it came back it had the gaps..

10 June 2008, 01:20 PM	#14
SubKing "TRF" Member Join Date: Feb 2008 Location: USA Watch: where do i start?? Posts: 3,254	thanks guys, I will send it back i'm working with someone at panerai in NY office to help speed things up as I have fingerprints inside the crystal, caseback scratches tool marks on the side of the case and crown gaurd and light scratches on the bracelet like it has been worn for a couple months and please keep in mind when I sent it in, it was perfect brand new condition. only got 2 weeks of light rist time as my submariner is my everyday watch which looks more new than my panerai at this point. haha... talk about a nightmare.. no to add the gaps in my links... I'm asking for a watch replacment at this point but i don't think it will happen. So they will prob just keep taking apart and tinkering with what was a brand new watch but it will never be the same and I told them that... I also gave panerai as many before and after photo's that I could find on my computer to help my situation some... we will see what happens.. ill keep you all posted on the outcome... So far the ppl at the TX service center are of no help,short over the phone,and the director john sokol does not return phone calls ever. nice way to treat customers.. I guess it isn't always true you get what you pay for when it comes to panerai's.. it hurts to even wear my watch at this point so it has been sitting back in the box at this point. :*( losing my watch for months in service to come back worse is not what i had in mind to enjoy a watch i have never gotten to enjoy.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)