ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

adnjoo · 13 August 2017, 04:27 PM

I was having a bit of trouble rotating the bezel on my S-series Submariner so I decided to take off the bezel and see if all the parts are OK i.e. no grit blocking the rotation. However when I tried to put it back together I had a hard time fitting the small spring with the external part and so I decided to just keep them all in a separate plastic case.

And now I present to you the bezel-less Colonel Kurtz (Marlon Brando in Apocalypse Now) style Submariner.

It feels great: very elemental feeling, ready to go off into the proverbial Vietnam jungle and live off my senses ;]

Simon_e · 13 August 2017, 04:39 PM

Beware - the crystal is now more vulnerable as it's more exposed. I would be trying to fit that bezel back on asap.

tamiya · 13 August 2017, 05:00 PM

You broke your watch, sonny!

Good excuse as any to start modding

BristolCavendish · 13 August 2017, 05:14 PM

You have quite possibly created a new Rolex model, a contemporary fashion statement and potential cult following all in one measure.

sager · 13 August 2017, 09:08 PM

lol...

But seriously though, fix that bezel. Otherwise you put the crystal at risk.

Racerdj · 13 August 2017, 09:11 PM

I have done similar activities in the past taking things apart that I can't get back together. Lesson learned as I do not attempt anymore. I feel your pain.

fskywalker · 13 August 2017, 09:36 PM

Well, guess it is time to arrange a trip to RSC, have your wallet ready!

ras47 · 13 August 2017, 09:44 PM

I recently restored the bezel click function on my GMT2 and it was a simple job but took a light touch to get the spring in place. Every time I got it set the spring would fall off as I took my finger off it. I also had to give the spring a little more curve, plus I bent the end upwards slightly to get it to engage the bezel properly.

The steps are simple and straightforward, but it takes a deft touch. Tucking the spring into the groove on the watch casing and holding it in place with a toothpick let me remove my finger from the spring without it falling away.

AK797 · 13 August 2017, 10:51 PM

You look like an errand boy...

Golden Ellipse · 13 August 2017, 11:22 PM

The horror! The horror!

HogwldFLTR · 14 August 2017, 12:32 AM

I watched a snail crawl along the edge of a straight razor. That's my dream. That's my nightmare. Crawling, slithering, along the edge of a straight... razor... and surviving.

Old Geezer · 14 August 2017, 02:01 AM

I hope you have plans to have the bezel replaced ASAP. Sorry, just looks like a "broken" watch without the bezel.

13 August 2017, 04:27 PM	#1
adnjoo "TRF" Member Join Date: Jan 2016 Location: Singapore Posts: 108	I present to you the Colonel Kurtz Rolex I was having a bit of trouble rotating the bezel on my S-series Submariner so I decided to take off the bezel and see if all the parts are OK i.e. no grit blocking the rotation. However when I tried to put it back together I had a hard time fitting the small spring with the external part and so I decided to just keep them all in a separate plastic case. And now I present to you the bezel-less Colonel Kurtz (Marlon Brando in Apocalypse Now) style Submariner. It feels great: very elemental feeling, ready to go off into the proverbial Vietnam jungle and live off my senses ;]

13 August 2017, 04:39 PM	#2
Simon_e "TRF" Member Join Date: Dec 2011 Location: Berkshire,England Posts: 362	Beware - the crystal is now more vulnerable as it's more exposed. I would be trying to fit that bezel back on asap. __________________ Life is too short to wear anything but a Rolex.

13 August 2017, 09:11 PM	#6
Racerdj 2024 Pledge Member Join Date: Apr 2013 Location: Indianapolis Watch: Patek-Philippe Posts: 16,832	I have done similar activities in the past taking things apart that I can't get back together. Lesson learned as I do not attempt anymore. I feel your pain. __________________ Rolex and Patek Philippe

13 August 2017, 09:36 PM	#7
fskywalker 2024 Pledge Member Join Date: Aug 2014 Real Name: Francisco Location: San Juan, PR Watch: Is Ticking ! Posts: 25,182	Well, guess it is time to arrange a trip to RSC, have your wallet ready! __________________ Francisco ♛ 16610 / 116264 Ω 168.022 / 2535.80.00 / 310.30.42.50.01.002 / 210.90.42.20.01.001 Zenith 02.480.405 2FA security enabled

13 August 2017, 09:44 PM	#8
ras47 "TRF" Member Join Date: Apr 2017 Real Name: Robert Location: Northern NJ Watch: 16710 BLRO Posts: 3,064	I recently restored the bezel click function on my GMT2 and it was a simple job but took a light touch to get the spring in place. Every time I got it set the spring would fall off as I took my finger off it. I also had to give the spring a little more curve, plus I bent the end upwards slightly to get it to engage the bezel properly. The steps are simple and straightforward, but it takes a deft touch. Tucking the spring into the groove on the watch casing and holding it in place with a toothpick let me remove my finger from the spring without it falling away. __________________ Rolex GMT Master II BLRO 16710 Omega Speedmaster Co-Axial Chrono

13 August 2017, 05:00 PM	#3
tamiya "TRF" Member Join Date: Jul 2017 Real Name: Willy Location: AU, SG, MY Posts: 1,248	You broke your watch, sonny! Good excuse as any to start modding

13 August 2017, 05:14 PM	#4
BristolCavendish Banned Join Date: Aug 2016 Location: United States Posts: 1,864	You have quite possibly created a new Rolex model, a contemporary fashion statement and potential cult following all in one measure.

13 August 2017, 09:08 PM	#5
sager "TRF" Member Join Date: Jan 2013 Real Name: Sage Location: MENA Posts: 1,563	lol... But seriously though, fix that bezel. Otherwise you put the crystal at risk.

13 August 2017, 10:51 PM	#9
AK797 2024 Pledge Member Join Date: Feb 2010 Real Name: Neil Location: UK Watch: ing ships roll in Posts: 59,369	You look like an errand boy...

13 August 2017, 11:22 PM	#10
Golden Ellipse 2024 Pledge Member Join Date: Jul 2010 Location: Family first Posts: 652	The horror! The horror!

14 August 2017, 12:32 AM	#11
HogwldFLTR 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Aug 2012 Real Name: Lee Location: 42.48.45N70.48.48 Watch: Too many to list! Posts: 33,695	I watched a snail crawl along the edge of a straight razor. That's my dream. That's my nightmare. Crawling, slithering, along the edge of a straight... razor... and surviving. __________________ Troglodyte in residence! https://www.rolexforums.com/showthread.php?t=808599

14 August 2017, 02:01 AM	#12
Old Geezer "TRF" Member Join Date: May 2015 Location: South Carolina Posts: 5,287	I hope you have plans to have the bezel replaced ASAP. Sorry, just looks like a "broken" watch without the bezel.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode