ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

ROLEX4FD · 28 December 2006, 12:41 PM

I've had my TT Sub now for 6 months and am VERY happy with it. The bracelet as it comes stock from the AD and adjusted to it's largest size was a bit too snug for my liking when warm, but "okay" when cool/cold. I wasn't happy with the overall comfort as I prefer to wear my watches a bit looser (from my Omega Seamaster days) and as such, I purchased and had installed an extra link on the 6 o'clock side. The clasp now sits on the middle of my wrist, and the micro-adjustment pin is on the second hole from the smallest. The net result is a very comfortable, albeit loose, fit when cool/cold and still comfortably loose when warmer. The watch does slide back and forth on the wrist (but cannot roll over) and it does slide freely up and down my wrist when I raise and lower my arm - more so when cooler, but still a bit when warmer.

All of this to ask (and I do appreciate your patience) if 1) wearing the bracelet looser will cause premature wear of the hollow links and 2) if worn a big snugger, would the "pressure" of the wrist pressing against the bracelet cause more or less wear and/or stretching (i.e., more of a problem)?

Any insights or advice you can provide would be greatly appreciated. I keep adjusting it back and forth and it's close to driving me crazy.

Thank you for your time and advice.

DIVER4USN · 28 December 2006, 03:53 PM

Metal bracelets will definitely wear prematurely if worn loose. This is the # reason that they are lost in dives. Loose metal wearing against loose metal.

The watch should be worn as you like it. Just keep in mind that you may want a watchmaker to check the condition of it more frequently. This damage is blind to the naked eye!

JJ Irani · 28 December 2006, 04:04 PM

Quote:

Originally Posted by ROLEX4FD

I've had my TT Sub now for 6 months and am VERY happy with it. The bracelet as it comes stock from the AD and adjusted to it's largest size was a bit too snug for my liking when warm, but "okay" when cool/cold. I wasn't happy with the overall comfort as I prefer to wear my watches a bit looser (from my Omega Seamaster days) and as such, I purchased and had installed an extra link on the 6 o'clock side. The clasp now sits on the middle of my wrist, and the micro-adjustment pin is on the second hole from the smallest. The net result is a very comfortable, albeit loose, fit when cool/cold and still comfortably loose when warmer. The watch does slide back and forth on the wrist (but cannot roll over) and it does slide freely up and down my wrist when I raise and lower my arm - more so when cooler, but still a bit when warmer.

All of this to ask (and I do appreciate your patience) if 1) wearing the bracelet looser will cause premature wear of the hollow links and 2) if worn a big snugger, would the "pressure" of the wrist pressing against the bracelet cause more or less wear and/or stretching (i.e., more of a problem)?

Any insights or advice you can provide would be greatly appreciated. I keep adjusting it back and forth and it's close to driving me crazy.

Thank you for your time and advice.

If you want to be absolutely sure about the correct fit of your bracelet, you should be able to insert a finger between the bracelet and your wrist like this. Then you know that the fit is proper!!

finance21 · 29 December 2006, 04:50 AM

I do know that the 1 finger trick is right on. However, wear the watch how you like. You will get more joy out of it that way.

finance21 · 29 December 2006, 04:50 AM

I do know that the 1 finger trick is right on. However, wear the watch how you like. You will get more joy out of it that way.

JJ Irani · 29 December 2006, 04:55 AM

Quote:

Originally Posted by finance21

I do know that the 1 finger trick is right on. However, wear the watch how you like. You will get more joy out of it that way.

That 1 finger thingy is just a guideline. If you wear the watch too tight, it will eventually lead to a bracelet s-t-r-e-t-c-h. If too loose, then you could have the top heavy head of the watch itself putting a strain on the links over a long period of time.

By being able to insert the finger between the wrist and bracelet (as pictired above), you are ensuring yourself a comfortable fit!!

tonelar · 29 December 2006, 04:55 AM

Exactly how I wear mine... great advice, y'all.

JJ Irani · 29 December 2006, 04:55 AM

Quote:

Originally Posted by finance21

I do know that the 1 finger trick is right on. However, wear the watch how you like. You will get more joy out of it that way.

That 1 finger thingy is just a guideline. If you wear the watch too tight, it will lead to a bracelet s-t-r-e-t-c-h eventually. If too loose, then you could have the top heavy head of the watch itself putting a strain on the links over a long period of time.

By being able to insert the finger between the wrist and bracelet (as pictured above), you are ensuring yourself a comfortable fit!!

charles · 29 December 2006, 04:56 AM

Quote:

Originally Posted by finance21

I do know that the 1 finger trick is right on. However, wear the watch how you like. You will get more joy out of it that way.

Definitely...JJ if I wore a watch that loose I'd lose what's left of my mind.

JJ Irani · 29 December 2006, 04:59 AM

Quote:

Originally Posted by charles

Definitely...JJ if I wore a watch that loose I'd lose what's left of my mind.

Sorry, Charles, you got that wrong. Being able to insert the finger exactly as I've shown, will ensure a PERFECT fit - NOT a loose one. Try it and you will see for yourself.

JJ

ROLEX4FD · 29 December 2006, 05:00 AM

Thank you all for the detailed feedback, and JJ for the pictures - very helpful. I appreciate hearing and seeing how others wear their Rolex's. If anyone else would care to weigh in, it would be much appreciated. Happy New Year!!!

charles · 29 December 2006, 05:06 AM

Quote:

Originally Posted by JJ Irani

Sorry, Charles, you got that wrong. Being able to insert the finger exactly as I've shown, will ensure a PERFECT fit - NOT a loose one. Try it and you will see for yourself.

JJ

I guess to each their own...mine was just about that loose and it was driving me nuts sliding around my arm and wrist. I just don't like it that loose...I removed a large link and added a small, then adjusted the clasp and was able to nail it down.

JJ Irani · 29 December 2006, 05:13 AM

Quote:

Originally Posted by charles

I guess to each their own...mine was just about that loose and it was driving me nuts sliding around my arm and wrist. I just don't like it that loose...I removed a large link and added a small, then adjusted the clasp and was able to nail it down.

Agreed, Charles. I hate to wear it loose too. I wouldn't want any of my watches slip/sliding all over my wrist.

By using the system I've pictured above, you can use that norm for just about any watch in the world. It will always ensure a comfortable fit - NOT a loose one. Try it, pal....I betcha it will work!!

charles · 29 December 2006, 05:14 AM

Quote:

Originally Posted by JJ Irani

Agreed, Charles. I hate to wear it loose too. I wouldn't want any of my watches slip/sliding all over my wrist.

By using the system I've pictured above, you can use that norm for just about any watch in the world. It will always ensure a comfortable fit - NOT a loose one. Try it, pal....I betcha it will work!!

I'm on a leather DiModell now.

mike · 29 December 2006, 08:52 AM

I find the "JJ method" to be right for me.

Prince · 29 December 2006, 09:55 AM

Quote:

Originally Posted by mike

I find the "JJ method" to be right for me.

Yes Mike, but you don't have that much hair, do you?!?

JJ Irani · 29 December 2006, 09:57 AM

Quote:

Originally Posted by Prince

Yes Mike, but you don't have that much hair, do you?!?

You had to come along and throw a spanner into the works, didn't you, you tosser?

Prince · 29 December 2006, 09:59 AM

Quote:

Originally Posted by JJ Irani

You had to come along and throw a spanner into the works, didn't you, you tosser?

Hey! Its what I do!!!

JJ Irani · 29 December 2006, 10:02 AM

Quote:

Originally Posted by Prince

Hey! Its what I do!!!

BEST!! You forgot to add the all important word - BEST!!

Prince · 29 December 2006, 10:04 AM

Quote:

Originally Posted by JJ Irani

BEST!!...

Funny, that's exactly what my wife said just last night..."Honey, you're the BEST!!!"

JJ Irani · 29 December 2006, 10:06 AM

Quote:

Originally Posted by Prince

Funny, that's exactly what my wife said just last night..."Honey, you're the BEST!!!"

Well, as long as it's just your lovely wife and not some floozie sheep you happened to have picked up!!

Prince · 29 December 2006, 10:07 AM

Quote:

Originally Posted by JJ Irani

Well, as long as it's just your lovely wife and not some floozie sheep you happened to have picked up!!

We don't have any sheep here, JJ. But if I happen to run across one, I'll send for you right away. Can't ask for a better arrangement!

JJ Irani · 29 December 2006, 10:09 AM

If you happen to RUN across one......just bar-b-q the bugger!!

Prince · 29 December 2006, 10:13 AM

Quote:

Originally Posted by JJ Irani

If you happen to RUN across one......just bar-b-q the bugger!!

Already did!!! He was standing too close to the road - I got twenty extra points!!

JJ Irani · 29 December 2006, 10:17 AM

Quote:

Originally Posted by Prince

Already did!!! He was standing too close to the road - I got twenty extra points!!

Another thread bites the dust, tosser!

Between you and me and our hijacking skills, we'd make the Al Queda guys look like novices!!

28 December 2006, 12:41 PM	#1
ROLEX4FD Member Join Date: Dec 2006 Location: San Diego Watch: TT Blue Sub & SDDS Posts: 105	Newbie Question: Proper Bracelet Fit I've had my TT Sub now for 6 months and am VERY happy with it. The bracelet as it comes stock from the AD and adjusted to it's largest size was a bit too snug for my liking when warm, but "okay" when cool/cold. I wasn't happy with the overall comfort as I prefer to wear my watches a bit looser (from my Omega Seamaster days) and as such, I purchased and had installed an extra link on the 6 o'clock side. The clasp now sits on the middle of my wrist, and the micro-adjustment pin is on the second hole from the smallest. The net result is a very comfortable, albeit loose, fit when cool/cold and still comfortably loose when warmer. The watch does slide back and forth on the wrist (but cannot roll over) and it does slide freely up and down my wrist when I raise and lower my arm - more so when cooler, but still a bit when warmer. All of this to ask (and I do appreciate your patience) if 1) wearing the bracelet looser will cause premature wear of the hollow links and 2) if worn a big snugger, would the "pressure" of the wrist pressing against the bracelet cause more or less wear and/or stretching (i.e., more of a problem)? Any insights or advice you can provide would be greatly appreciated. I keep adjusting it back and forth and it's close to driving me crazy. Thank you for your time and advice.

29 December 2006, 04:55 AM	#7
tonelar "TRF" Member Join Date: Dec 2006 Real Name: Tony Location: san francisco Watch: Seadweller Posts: 1,368	Exactly how I wear mine... great advice, y'all. __________________ It's a rarity that something popular is actually right... Wear 'em with PRIDE, y'all.

29 December 2006, 10:09 AM	#23
JJ Irani Fondly Remembered Join Date: May 2005 Real Name: JJ Location: Auckland, NZ Watch: ALL SOLD!! Posts: 74,319	If you happen to RUN across one......just bar-b-q the bugger!! __________________ Words fail me in expressing my utmost thanks to ALL of you for this wonderful support during my hour of need!! I firmly believe that my time on planet earth is NOT yet up!! I shall fight this to the very end.......and WIN!!

28 December 2006, 03:53 PM	#2
DIVER4USN "TRF" Member Join Date: Dec 2006 Real Name: JASON Location: Chesapeake, VA Watch: 116660 Posts: 183	Metal bracelets will definitely wear prematurely if worn loose. This is the # reason that they are lost in dives. Loose metal wearing against loose metal. The watch should be worn as you like it. Just keep in mind that you may want a watchmaker to check the condition of it more frequently. This damage is blind to the naked eye!

29 December 2006, 04:50 AM	#4
finance21 2024 Pledge Member Join Date: Dec 2006 Location: U.S.A Posts: 363	I do know that the 1 finger trick is right on. However, wear the watch how you like. You will get more joy out of it that way.

29 December 2006, 05:00 AM	#11
ROLEX4FD Member Join Date: Dec 2006 Location: San Diego Watch: TT Blue Sub & SDDS Posts: 105	Thank you all for the detailed feedback, and JJ for the pictures - very helpful. I appreciate hearing and seeing how others wear their Rolex's. If anyone else would care to weigh in, it would be much appreciated. Happy New Year!!!

29 December 2006, 08:52 AM	#15
mike "TRF" Member Join Date: Jul 2005 Posts: 22,683	I find the "JJ method" to be right for me.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)