ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

MortgageGuy · 29 June 2010, 01:08 PM

Check out what happened to my bracelet on my V serial GMT ceramic

I dont know what happened

Any ideas????

kyle L · 29 June 2010, 01:09 PM

If you don't know, I certainly have no idea.

Was it in the fire or something?

tgoose1 · 29 June 2010, 01:15 PM

Is it stained or have a rough feel to it?

ayres · 29 June 2010, 01:16 PM

could you please provide some other pics? i'm a bit unsure of what i'm looking at. is it darkened?

plus, the orange, incandescent lighting does not help in discerning the coloration.

kyle L · 29 June 2010, 01:18 PM

Kind of has the same effect as Jocke's watch:

http://www.rolexforums.com/showpost....09&postcount=2

scl6118 · 29 June 2010, 01:19 PM

What are we looking at? Can you put the watch under better lighting?

sakuraba · 29 June 2010, 01:20 PM

Quote:

Originally Posted by scl6118

What are we looking at?

I think the last link has a discoloration. Looks like burnt metal?

chriseskew24 · 29 June 2010, 01:20 PM

fire???

sleddog · 29 June 2010, 02:05 PM

Quote:

Originally Posted by sakuraba

I think the last link has a discoloration. Looks like burnt metal?

Exactly....Or an electrical arc burn???
Need clearer pics!!! Are you sure you don't know how this happened.....Just looked down and there it was....

MortgageGuy · 29 June 2010, 02:24 PM

Oh no, I know what happened, I just wanted to see how good you guys were... Sorry I got delayed and could not get back here.

Remember my loctite thread? Well, I used the wrong loctite and the links got stiff (to say the least) and nothing would loosen it... Warm water, soap, acetone, gasoline... NOTHING.

When all else fails use FIRE... I held a flame to the watch for about 5 minutes to burn the loctite off, not sure if it was the smartest thing to do or not

but it worked, it loosened the link and now it is not stiff... All the black discoloration came off with a bit of rubbing and it looks like new again.

So who wants to buy a perfectly new GMT Ceramic???

Just kidding... I love it. It was so stiff that I could not wear it so this is what I did. Funny thing here, some are scared to allow anyone other than ROLEX to regulate their watch and I hold open flames to mine

Moral of the story USE THE CORRECT LOCTITE AND ONLY A LITTLE!!!

sakuraba · 29 June 2010, 02:26 PM

Maybe you should have used Rob's blow dryer.

andrew79 · 29 June 2010, 02:27 PM

This must be another "every rolex tells a story" thread ! very brave .....

MortgageGuy · 29 June 2010, 02:28 PM

Quote:

Originally Posted by kyle L

If you don't know, I certainly have no idea.

Was it in the fire or something?

You got it right away Kyle... Damn, your good

MortgageGuy · 29 June 2010, 02:29 PM

Quote:

Originally Posted by sakuraba

Maybe you should have used Rob's blow dryer.

sleddog · 29 June 2010, 02:30 PM

Quote:

Originally Posted by MortgageGuy

Oh no, I know what happened, I just wanted to see how good you guys were... Sorry I got delayed and could not get back here.

Remember my loctite thread? Well, I used the wrong loctite and the links got stiff (to say the least) and nothing would loosen it... Warm water, soap, acetone, gasoline... NOTHING.

When all else fails use FIRE... I held a flame to the watch for about 5 minutes to burn the loctite off, not sure if it was the smartest thing to do or not

but it worked, it loosened the link and now it is not stiff... All the black discoloration came off with a bit of rubbing and it looks like new again.

So who wants to buy a perfectly new GMT Ceramic???

Just kidding... I love it. It was so stiff that I could not wear it so this is what I did. Funny thing here, some are scared to allow anyone other than ROLEX to regulate their watch and I hold open flames to mine

Moral of the story USE THE CORRECT LOCTITE AND ONLY A LITTLE!!!

I knew something wasn't right!!

Quote:

Originally Posted by sakuraba

Maybe you should have used Rob's blow dryer.

Not mine Jib,the wife's!!!!
I have a head like JJ's....................

sakuraba · 29 June 2010, 02:32 PM

Quote:

Originally Posted by sleddog1000

Not mine Jib,the wife's!!!!
I have a head like JJ's....................

Sorry Rob!

I meant for him to have used your hairdryer advice

Was typing too fast for my own good again!

JJ Irani · 29 June 2010, 02:33 PM

Quote:

Originally Posted by sleddog1000

I knew something wasn't right!!

Not mine Jib,the wife's!!!!
I have a head like JJ's....................

MortgageGuy · 29 June 2010, 02:33 PM

Quote:

Originally Posted by sleddog1000

I knew something wasn't right!!

Not mine Jib,the wife's!!!!
I have a head like JJ's....................

You know the scary part??? Right after I held the flame over it and let it cool off a bit I ran it under cold water... BIG MISTAKE.. I had touched the hot steel and my fingerprints were still on it... I could not get them off. I rubbed and rubbed and they wouldnt come off...

You dont want to know how I got them off but I did

JJ Irani · 29 June 2010, 02:34 PM

Quote:

Originally Posted by MortgageGuy

You dont want to know how I got them off but I did

I would like to know how you got those fingerprints off!!

sleddog · 29 June 2010, 02:36 PM

Quote:

Originally Posted by MortgageGuy

You know the scary part??? Right after I held the flame over it and let it cool off a bit I ran it under cold water... BIG MISTAKE.. I had touched the hot steel and my fingerprints were still on it... I could not get them off. I rubbed and rubbed and they wouldnt come off...

You dont want to know how I got them off but I did

Let me guess.........More flame???

sleddog · 29 June 2010, 02:38 PM

Quote:

Originally Posted by sakuraba

Sorry Rob!

I meant for him to have used your hairdryer advice

Was typing too fast for my own good again!

I knew what you meant.........

Quote:

Originally Posted by JJ Irani

JJ,oneday everyone will want to be like us!!!

JJ Irani · 29 June 2010, 02:40 PM

Quote:

Originally Posted by sleddog1000

I knew what you meant.........

JJ,oneday everyone will want to be like us!!!

Well, I guess it's easier and simpler to be like us than to have a huge abundance of hair!!

MortgageGuy · 29 June 2010, 02:40 PM

Same watch, same pic...Who needs RSC

JJ Irani · 29 June 2010, 02:41 PM

Great job!!

sakuraba · 29 June 2010, 02:41 PM

Quote:

Originally Posted by JJ Irani

Well, I guess it's easier and simpler to be like us than to have a huge abundance of hair!!

For one, you save a lot on shampoo!

Just kidding, guys.

MortgageGuy · 29 June 2010, 02:41 PM

Quote:

Originally Posted by JJ Irani

Well, I guess it's easier and simpler to be like us than to have a huge abundance of hair!!

Are you guys hijacking my thread???

JJ Irani · 29 June 2010, 02:42 PM

Quote:

Originally Posted by sakuraba

For one, you save a lot on shampoo!

Just kidding, guys.

Shampoos, Conditioners, hair creams, barbers, etc. - virtually tantamount to a new Rolex each year!!

JJ Irani · 29 June 2010, 02:43 PM

Quote:

Originally Posted by MortgageGuy

Are you guys hijacking my thread???

Hell, and we didn't even mean to.............guess it kinda just comes naturally to us pros!!

sakuraba · 29 June 2010, 02:43 PM

Quote:

Originally Posted by JJ Irani

Shampoos, Conditioners, hair creams, barbers, etc. - virtually tantamount to a new Rolex each year!!

So that's how you do it, JJ! I have eat mac and cheese for a year to save up.

sakuraba · 29 June 2010, 02:45 PM

Quote:

Originally Posted by MortgageGuy

Are you guys hijacking my thread???

Sorry, Adam.

29 June 2010, 01:08 PM	#1
MortgageGuy "TRF" Member Join Date: Jun 2009 Real Name: Adam Location: Orlando, Florida Watch: Me Posts: 9,935	GMT's are HOT Check out what happened to my bracelet on my V serial GMT ceramic I dont know what happened Any ideas???? __________________ The richest people in the world look for and build NETWORKS, Everyone else looks for work... Robert Kiyosaki

29 June 2010, 01:19 PM	#6
scl6118 "TRF" Member Join Date: Oct 2009 Real Name: Shawn Location: United States Watch: SS GMT IIC Posts: 1,624	What are we looking at? Can you put the watch under better lighting? __________________ Current: SS GMT IIC Former: Panerai 114 Former: Breitling Hercules :

29 June 2010, 02:24 PM	#10
MortgageGuy "TRF" Member Join Date: Jun 2009 Real Name: Adam Location: Orlando, Florida Watch: Me Posts: 9,935	Oh no, I know what happened, I just wanted to see how good you guys were... Sorry I got delayed and could not get back here. Remember my loctite thread? Well, I used the wrong loctite and the links got stiff (to say the least) and nothing would loosen it... Warm water, soap, acetone, gasoline... NOTHING. When all else fails use FIRE... I held a flame to the watch for about 5 minutes to burn the loctite off, not sure if it was the smartest thing to do or not but it worked, it loosened the link and now it is not stiff... All the black discoloration came off with a bit of rubbing and it looks like new again. So who wants to buy a perfectly new GMT Ceramic??? Just kidding... I love it. It was so stiff that I could not wear it so this is what I did. Funny thing here, some are scared to allow anyone other than ROLEX to regulate their watch and I hold open flames to mine Moral of the story USE THE CORRECT LOCTITE AND ONLY A LITTLE!!! __________________ The richest people in the world look for and build NETWORKS, Everyone else looks for work... Robert Kiyosaki

29 June 2010, 02:26 PM	#11
sakuraba "TRF" Member Join Date: May 2009 Real Name: Jib Location: SJ, California Watch: sun dial Posts: 8,189	Maybe you should have used Rob's blow dryer. __________________ F 14000 AirKing black F 16710 GMT Pepsi F 16570 Explorer II white T 16600 SD D 16610 LV "fine quality is remembered long after the pain of spending money" -Steve Mulholland

29 June 2010, 02:27 PM	#12
andrew79 "TRF" Member Join Date: Apr 2010 Real Name: Andrew Location: Indonesia Watch: Rolex Posts: 2,277	This must be another "every rolex tells a story" thread ! very brave ..... __________________ Baume & Mercier Riviera Rolex GMT II c, DJ 116234, Sub 16610, EXP 2 16570 Panerai 111 , 232

29 June 2010, 01:09 PM	#2
kyle L "TRF" Member Join Date: Feb 2009 Location: USA Watch: Rolex Explorer I Posts: 10,278	If you don't know, I certainly have no idea. Was it in the fire or something?

29 June 2010, 01:15 PM	#3
tgoose1 "TRF" Member Join Date: May 2009 Location: Louisiana Watch: Rolex Submariner Posts: 668	Is it stained or have a rough feel to it?

29 June 2010, 01:16 PM	#4
ayres "TRF" Member Join Date: Aug 2008 Location: honolulu Watch: whatever runs Posts: 551	could you please provide some other pics? i'm a bit unsure of what i'm looking at. is it darkened? plus, the orange, incandescent lighting does not help in discerning the coloration.

29 June 2010, 01:18 PM	#5
kyle L "TRF" Member Join Date: Feb 2009 Location: USA Watch: Rolex Explorer I Posts: 10,278	Kind of has the same effect as Jocke's watch: http://www.rolexforums.com/showpost....09&postcount=2

29 June 2010, 01:20 PM	#8
chriseskew24 "TRF" Member Join Date: Sep 2008 Real Name: Christopher Location: fort lauderdale Watch: Bunches Posts: 1,860	fire???

29 June 2010, 02:40 PM	#23
MortgageGuy "TRF" Member Join Date: Jun 2009 Real Name: Adam Location: Orlando, Florida Watch: Me Posts: 9,935	Same watch, same pic...Who needs RSC __________________ The richest people in the world look for and build NETWORKS, Everyone else looks for work... Robert Kiyosaki

29 June 2010, 02:41 PM	#24
JJ Irani Fondly Remembered Join Date: May 2005 Real Name: JJ Location: Auckland, NZ Watch: ALL SOLD!! Posts: 74,319	Great job!! __________________ Words fail me in expressing my utmost thanks to ALL of you for this wonderful support during my hour of need!! I firmly believe that my time on planet earth is NOT yet up!! I shall fight this to the very end.......and WIN!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)