ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

dooder202 · 10 July 2011, 05:53 AM

I heard that most chrono's should not be operated under water. Obviously they are buttons that must allow a less stronger seal when pushed. But if they are unscrewed on the Daytona, is that bad to do if you're going into water?

worktolivelife · 10 July 2011, 05:59 AM

they are just lock nuts to prevent activation of the pushers

The GMT Master · 10 July 2011, 05:59 AM

The pushers don't need to be screwed down to be waterproof, but it does stop you from accidentally pressing them - that does compromise the seals and allows water into the case.

Joey_V · 10 July 2011, 06:24 AM

No... They are just as waterproof closed or open. You just can't push them or you lose.

Keep them locked though, so they don't get pushed accidentally.

ManUtd · 10 July 2011, 06:30 AM

That's good to know. I always thought it was necessary to screw them in.

dooder202 · 10 July 2011, 07:18 AM

Thanks for the info guys!

10 July 2011, 05:53 AM	#1
dooder202 Banned Join Date: Sep 2010 Real Name: Eric Location: US Watch: DateJust Posts: 1,468	Do the pushers on the Daytona's need to be screwed down before going in water? I heard that most chrono's should not be operated under water. Obviously they are buttons that must allow a less stronger seal when pushed. But if they are unscrewed on the Daytona, is that bad to do if you're going into water?

10 July 2011, 05:59 AM	#2
worktolivelife "TRF" Member Join Date: Sep 2005 Location: UK Posts: 1,365	they are just lock nuts to prevent activation of the pushers __________________ MEMBER NO.142

10 July 2011, 06:24 AM	#4
Joey_V "TRF" Member Join Date: Jan 2008 Real Name: Joey Location: Dallas, TX Watch: SS Sub 16610 M Posts: 3,824	No... They are just as waterproof closed or open. You just can't push them or you lose. Keep them locked though, so they don't get pushed accidentally. __________________ Current Rotation: Rolex Submariner Date (M) - 1/08, Rolex Milgauss GV (V) - 2/10, Rolex SS Black Daytona (V) - 6/10, Rolex GMTIIC (G) - 5/11, TAG Heuer Silverstone (286/1860) - 1/2015 Former-watches: Omega PO/2535.80/2254, TAG Carrera/F1x2/Monaco, Panerai 312K/292L Wish List: Panerai 270/505, Rolex SMURF, Rolex RG Daytona, Rolex DSSD

10 July 2011, 06:30 AM	#5
ManUtd "TRF" Member Join Date: Jun 2011 Real Name: Eric Location: SF Bay Area Posts: 1,613	That's good to know. I always thought it was necessary to screw them in. __________________ 116520 116610LN 126334 126600 PAM986

10 July 2011, 05:59 AM	#3
The GMT Master "TRF" Member Join Date: Jul 2008 Real Name: Chris Location: England Posts: 8,150	The pushers don't need to be screwed down to be waterproof, but it does stop you from accidentally pressing them - that does compromise the seals and allows water into the case.

10 July 2011, 07:18 AM	#6
dooder202 Banned Join Date: Sep 2010 Real Name: Eric Location: US Watch: DateJust Posts: 1,468	Thanks for the info guys!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)