ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

CHRONOLEX · 25 December 2014, 01:38 PM

I've read people on here have just dropped by RSC to ask about the cyclops magnification and in some cases RSC replaced their crystals under warranty. My BLNR magnification is really substandard and I would like to pursue this option. Does anyone have any experience or guidance they could share on how best to do that? Thank you very much in advance.

Al1969 · 25 December 2014, 02:14 PM

I was considering doing the same. Here's mine.

CHRONOLEX · 25 December 2014, 02:21 PM

I hope someone will help us out here. Of my 10 Rolex watches, this is the one anomaly in my collection and it's really irritating.

DJExplorer · 25 December 2014, 03:50 PM

I have recently sent them my BLNR for cyclops issues (glued on misaligned) and to be honest it was a little battle to get them to do anything. If you send in your watch it will first go to Quality Control department technician. Who, for me, responded with that it's within spec. Now I suspect mine was only just within, as compared to my other two it was way off.
After commenting that "I know rolex can do better than what is on my watch, as I can see it in my others" they finally agreed to replace crystal compliments of them.
I suspect you will have a similar experience, with it being within spec. But I have read a few times about the BLNR cyclops issues.
I'm still awaiting my piece back and they are closed until Jan 5th if I recall.
Hopefully it comes back all good and sorted with no "induced" issues due to service work.
I have faith.

Dalton · 25 December 2014, 04:09 PM

Talk to the manager of the AD you bought it from. It should be corrected with a new crystal. Do you use glasses to read? That can have an effect on the way the cyclops magnifies through your eyewear. AR on your glasses, and AR on the cyclops also adds to the problem. you should compare two cyclops next to each other if you're able to bring in a second watch that you have, or ask the manager to bring out a new one from case.

CHRONOLEX · 25 December 2014, 05:34 PM

Quote:

Originally Posted by Dalton

Talk to the manager of the AD you bought it from. It should be corrected with a new crystal. Do you use glasses to read? That can have an effect on the way the cyclops magnifies through your eyewear. AR on your glasses, and AR on the cyclops also adds to the problem. you should compare two cyclops next to each other if you're able to bring in a second watch that you have, or ask the manager to bring out a new one from case.

I don't wear any corrective lenses. Have you ever seen a BLNR with the small mag before crystal change actually look normal and big after crystal change? I will try to post a pic of mine for comment.

RUK · 25 December 2014, 05:59 PM

This is why I bought the non date sub. No irritating Cyclopes to stress about :p

Dalton · 25 December 2014, 06:08 PM

Quote:

Originally Posted by CHRONOLEX

I don't wear any corrective lenses. Have you ever seen a BLNR with the small mag before crystal change actually look normal and big after crystal change? I will try to post a pic of mine for comment.

Never. But doesn't mean it doesn't happen.

25 December 2014, 01:38 PM	#1
CHRONOLEX 2024 Pledge Member Join Date: Jun 2008 Location: USA Posts: 1,629	Contacting RSC about cyclops mag? I've read people on here have just dropped by RSC to ask about the cyclops magnification and in some cases RSC replaced their crystals under warranty. My BLNR magnification is really substandard and I would like to pursue this option. Does anyone have any experience or guidance they could share on how best to do that? Thank you very much in advance.

25 December 2014, 02:14 PM	#2
Al1969 2024 Pledge Member Join Date: May 2008 Location: New Jersey Posts: 6,640	I was considering doing the same. Here's mine. Attached Images __________________ WG SUB-116719 GMT MASTER II 126719

25 December 2014, 05:59 PM	#7
RUK "TRF" Member Join Date: Dec 2013 Real Name: Ruk Location: .ie Watch: 5711,Sub,Daytona,P Posts: 1,232	This is why I bought the non date sub. No irritating Cyclopes to stress about :p __________________ 'The best watch out there is the one you like the most'

25 December 2014, 02:21 PM	#3
CHRONOLEX 2024 Pledge Member Join Date: Jun 2008 Location: USA Posts: 1,629	I hope someone will help us out here. Of my 10 Rolex watches, this is the one anomaly in my collection and it's really irritating.

25 December 2014, 03:50 PM	#4
DJExplorer "TRF" Member Join Date: Nov 2014 Location: GA Posts: 403	I have recently sent them my BLNR for cyclops issues (glued on misaligned) and to be honest it was a little battle to get them to do anything. If you send in your watch it will first go to Quality Control department technician. Who, for me, responded with that it's within spec. Now I suspect mine was only just within, as compared to my other two it was way off. After commenting that "I know rolex can do better than what is on my watch, as I can see it in my others" they finally agreed to replace crystal compliments of them. I suspect you will have a similar experience, with it being within spec. But I have read a few times about the BLNR cyclops issues. I'm still awaiting my piece back and they are closed until Jan 5th if I recall. Hopefully it comes back all good and sorted with no "induced" issues due to service work. I have faith.

25 December 2014, 04:09 PM	#5
Dalton TechXpert Join Date: Mar 2008 Real Name: Dal Location: Seattle Watch: 168000 Posts: 1,614	Talk to the manager of the AD you bought it from. It should be corrected with a new crystal. Do you use glasses to read? That can have an effect on the way the cyclops magnifies through your eyewear. AR on your glasses, and AR on the cyclops also adds to the problem. you should compare two cyclops next to each other if you're able to bring in a second watch that you have, or ask the manager to bring out a new one from case.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)