ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Oneironaut · 22 February 2016, 02:56 AM

I bought a new BLNR on the 12th this month from a local AD and after setting the date I noticed a small scrap of metal stuck on the date wheel that only showed up on the 12th. I pointed it out to the AD who offered me an additional discount off the watch if I wanted to send it to the RSC to get it fixed. I agreed since I thought it was a good deal. Now looking back at the pictures I took at the AD before sending the watch off I'm beginning to wonder if the mag on the cyclops is a little low. I figured I'd ask now while the watch is still at the RSC. Any help from the TRF QA team would be of great help! I have more pictures if needed too.

Snow-Dweller · 22 February 2016, 03:37 AM

Looks OK to me. I've always understood that the corners of the date window should (more or less) fit into the ends of the horizontal sides of the cyclops.

Watch@ddict · 22 February 2016, 03:46 AM

mag looks fine, other owners of the BLNR have had mag issues at 1.5 instead of 2.5 (not even sure that's official anymore) but the 1.5 is very noticeable.

Skyrider01 · 22 February 2016, 03:47 AM

Looks fine to me too.

AK797 · 22 February 2016, 03:53 AM

Mag is OK, should be a similar size to the Bezel 6.

bayerische · 22 February 2016, 03:58 AM

Mag is fine, but a metal chip on the 12th date number... Not ok!

Dubarzy · 22 February 2016, 04:02 AM

Looks to be the same size as mine. Doesn't bother me at all.

Danny83 · 22 February 2016, 04:02 AM

Looks good

albmich · 22 February 2016, 04:06 AM

+1. It's fine.

Aceldama · 22 February 2016, 04:10 AM

That mag looks fine to my eyes... I'd loupe the date and see if it's just scratch on the date wheel. If it's a piece of something, I'd get this looked at via RSC while it's still under warranty.

Oneironaut · 22 February 2016, 04:11 AM

Thanks all!! I'm looking forward to having her back from the RSC in a couple weeks since they apparently expedited the service on the date wheel.

lig · 22 February 2016, 04:12 AM

I'd be a lot more concerned bout metal bits in my BLNR than the cyclops!

The Shadow · 22 February 2016, 04:15 AM

Looks OK to me.

GP13 · 22 February 2016, 04:28 AM

Looks fine.

cdmorenot · 22 February 2016, 05:12 AM

Mag is OK.

Sent from my SM-N920T using Tapatalk

Daryl · 22 February 2016, 05:12 AM

Looks fine.mine says hi

Sent from my iPhone using Tapatalk

Daytona88 · 22 February 2016, 11:56 AM

mag looks OK to me

RichM · 22 February 2016, 12:04 PM

Looks fine to me.

alika · 22 February 2016, 06:56 PM

Looks OK to me.

fskywalker · 22 February 2016, 07:47 PM

The marking on the date wheel is weird on a new BLNR, glad RSC is fixing that for you.

22 February 2016, 02:56 AM	#1
Oneironaut "TRF" Member Join Date: Nov 2014 Location: NOLA Posts: 44	BLNR Cyclops - Help needed from TRF I bought a new BLNR on the 12th this month from a local AD and after setting the date I noticed a small scrap of metal stuck on the date wheel that only showed up on the 12th. I pointed it out to the AD who offered me an additional discount off the watch if I wanted to send it to the RSC to get it fixed. I agreed since I thought it was a good deal. Now looking back at the pictures I took at the AD before sending the watch off I'm beginning to wonder if the mag on the cyclops is a little low. I figured I'd ask now while the watch is still at the RSC. Any help from the TRF QA team would be of great help! I have more pictures if needed too.

22 February 2016, 03:37 AM	#2
Snow-Dweller 2024 Pledge Member Join Date: Mar 2014 Real Name: Clive Location: The Alps Watch: collections change Posts: 6,284	Looks OK to me. I've always understood that the corners of the date window should (more or less) fit into the ends of the horizontal sides of the cyclops. __________________ . The path from WIShood to WISdom can have many turnings... ——————————————————————————————————— . 16803. 16570. 18038. 114300. GMW-B5000D.

22 February 2016, 03:46 AM	#3
Watch@ddict "TRF" Member Join Date: Dec 2015 Real Name: Kevin M. Location: Los Angeles Watch: GMT2C/LVC/SSYM1/Da Posts: 180	mag looks fine, other owners of the BLNR have had mag issues at 1.5 instead of 2.5 (not even sure that's official anymore) but the 1.5 is very noticeable. __________________ Speed, price, and quality...you only get 2.

22 February 2016, 03:58 AM	#6
bayerische "TRF" Member Join Date: Nov 2009 Real Name: Andreas Location: Margaritaville Watch: Smurf Posts: 19,879	Mag is fine, but a metal chip on the 12th date number... Not ok! __________________ Yeah, well, you know, that's just, like, your opinion, man.

22 February 2016, 04:02 AM	#7
Dubarzy "TRF" Member Join Date: Mar 2015 Real Name: Wesley Location: Austin Watch: 214270 Posts: 630	Looks to be the same size as mine. Doesn't bother me at all. Attached Images

22 February 2016, 03:47 AM	#4
Skyrider01 "TRF" Member Join Date: Oct 2014 Location: Florida/Canada Posts: 1,312	Looks fine to me too.

22 February 2016, 03:53 AM	#5
AK797 2024 Pledge Member Join Date: Feb 2010 Real Name: Neil Location: UK Watch: ing ships roll in Posts: 59,369	Mag is OK, should be a similar size to the Bezel 6.

22 February 2016, 04:02 AM	#8
Danny83 2024 ROLEX DATEJUST41 Pledge Member Join Date: Sep 2013 Real Name: Danny Location: Bay Area CA Watch: Yellow Gold Posts: 20,312	Looks good

22 February 2016, 04:06 AM	#9
albmich "TRF" Member Join Date: Aug 2015 Location: WI Watch: SD4k Posts: 1,333	+1. It's fine.

22 February 2016, 04:10 AM	#10
Aceldama "TRF" Member Join Date: Jul 2013 Location: Central Cal Watch: Dads Omega Cal 601 Posts: 707	That mag looks fine to my eyes... I'd loupe the date and see if it's just scratch on the date wheel. If it's a piece of something, I'd get this looked at via RSC while it's still under warranty.

22 February 2016, 04:11 AM	#11
Oneironaut "TRF" Member Join Date: Nov 2014 Location: NOLA Posts: 44	Thanks all!! I'm looking forward to having her back from the RSC in a couple weeks since they apparently expedited the service on the date wheel.

22 February 2016, 04:12 AM	#12
lig "TRF" Member Join Date: Jan 2011 Location: PacNW Watch: Enthusiast Posts: 2,611	I'd be a lot more concerned bout metal bits in my BLNR than the cyclops!

22 February 2016, 04:15 AM	#13
The Shadow "TRF" Member Join Date: Dec 2015 Location: Where Evil lurks Posts: 92	Looks OK to me.

22 February 2016, 04:28 AM	#14
GP13 "TRF" Member Join Date: Oct 2015 Location: GA Watch: All of them... Posts: 407	Looks fine.

22 February 2016, 05:12 AM	#15
cdmorenot 2024 SubLV41 Pledge Member Join Date: Jun 2015 Real Name: Carlos. Location: NNJ - MDE Watch: = Want them all. Posts: 3,697	Mag is OK. Sent from my SM-N920T using Tapatalk __________________ \| Breguet \| Cartier \| Casio \| Hublot \| IWC \| Omega \| Rolex \| Seiko \|

22 February 2016, 05:12 AM	#16
Daryl 2024 SubLV41 Pledge Member Join Date: Apr 2015 Location: USA Posts: 3,363	Looks fine.mine says hi Sent from my iPhone using Tapatalk __________________ 2FA-Enabled Official Member "Perpetual 30" Las Vegas International GTG 2016 Official Member "WIS-CON" Las Vegas International GTG 2017 Official Member "WIS-CON" Las Vegas International GTG 2019

22 February 2016, 11:56 AM	#17
Daytona88 2024 Pledge Member Join Date: Dec 2015 Location: USA Watch: 5712 Posts: 2,621	mag looks OK to me

22 February 2016, 12:04 PM	#18
RichM 2024 SubLV41 Pledge Member Join Date: Mar 2015 Real Name: Richie Location: "Nowhere Man" Watch: out now,take care! Posts: 29,771	Looks fine to me. Attached Images __________________ "I love to work at nothing all day" TRF #139960

22 February 2016, 06:56 PM	#19
alika "TRF" Member Join Date: Nov 2015 Real Name: ali Location: istanbul Watch: 116500 Posts: 674	Looks OK to me.

22 February 2016, 07:47 PM	#20
fskywalker 2024 Pledge Member Join Date: Aug 2014 Real Name: Francisco Location: San Juan, PR Watch: Is Ticking ! Posts: 25,182	The marking on the date wheel is weird on a new BLNR, glad RSC is fixing that for you. __________________ Francisco ♛ 16610 / 116264 Ω 168.022 / 2535.80.00 / 310.30.42.50.01.002 / 210.90.42.20.01.001 Zenith 02.480.405 2FA security enabled

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)