ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Jeffs4315 · 7 May 2018, 09:53 AM

Hi Everyone - Long time reader, first time poster. This is a wonderful forum with some great people. I had a quick question for the masses.

Has anyone placed a rubber strap on their SD43? If so, does anyone have any recommendations? It appears Everest and Rubberb have yet to release a strap that works with the wider lug length of the SD43. Ideally I would love to use a strap that is compatible with the delopment clasp.

Thank you.

JohnLT · 7 May 2018, 10:36 AM

Im sure they are in development and will be available asap. The wait will be worth it.

Jeffs4315 · 7 May 2018, 12:00 PM

Thanks for the reply. I’ve been monitoring their sites for almost a year now, and I haven’t seen anything.

The 904L bracelet is beautiful, I just happen to work in an industry where the watch can take a decent beating. A nice rubber strap would be nice!

Thank you.

waterman1 · 7 May 2018, 03:50 PM

I spoke to rubber b last week and they told me release will be the end of May.

watchmework · 7 May 2018, 08:09 PM

Quote:

Originally Posted by waterman1

I spoke to rubber b last week and they told me release will be the end of May.

Nice! Will be interesting to see what it looks like after it took them over a year to release the strap.

1William · 7 May 2018, 08:49 PM

Good deal. I look forward to seeing them.

VicLeChic · 7 May 2018, 11:33 PM

Quote:

Originally Posted by waterman1

I spoke to rubber b last week and they told me release will be the end of May.

I'm looking forward to their strap since I got my SD43 last year. I hope they'll come up with something similar to the Deepsea's, what they call blocked integration where the strap is flush with the outer edge of the lugs.

TeddyS · 7 May 2018, 11:46 PM

+1 I’m really interested to see this

Sent from my iPhone using Tapatalk

imperio · 7 May 2018, 11:48 PM

Quote:

Originally Posted by VicLeChic

I'm looking forward to their strap since I got my SD43 last year. I hope they'll come up with something similar to the Deepsea's, what they call blocked integration where the strap is flush with the outer edge of the lugs.

Yes! When the strap isn't flush with the outer edge of the lugs it looks really off. Kinda like this...

printrep · 7 May 2018, 11:50 PM

Quote:

Originally Posted by VicLeChic

I'm looking forward to their strap since I got my SD43 last year. I hope they'll come up with something similar to the Deepsea's, what they call blocked integration where the strap is flush with the outer edge of the lugs.

When I spoke to Rubber B last month the person I spoke to said the SD43 strap would not be covering the end of the lugs like it does on the Deepsea.

Devildog · 7 May 2018, 11:55 PM

Quote:

Originally Posted by imperio

Yes! When the strap isn't flush with the outer edge of the lugs it looks really off. Kinda like this...

That could be any super-case sub

imperio · 8 May 2018, 12:00 AM

Quote:

Originally Posted by Devildog

That could be any super-case sub

Exactly why I couldn't get myself to put a rubber b on my subC and expII. Only the Deepsea and only rubber B, not Everest.

watchmework · 8 May 2018, 08:56 AM

This is the response I received from RubberB when I reached out.

"Hello,

I am sorry but due to manufacturing delays in Switzerland, the Rubber B for the 43mm Seadweller should become available this summer 2018

We apologize again for the wait, but this strap is a more complicated one than most others. It is very unique and will be worth the wait for sure!

If you already are registered on our insiders list below you will be notified as soon as it becomes available for purchase.

Thank you for your patience and interest in Rubber B."

Flybak · 8 May 2018, 10:50 AM

Quote:

Originally Posted by watchmework

This is the response I received from RubberB when I reached out.

"Hello,

I am sorry but due to manufacturing delays in Switzerland, the Rubber B for the 43mm Seadweller should become available this summer 2018

We apologize again for the wait, but this strap is a more complicated one than most others. It is very unique and will be worth the wait for sure!

If you already are registered on our insiders list below you will be notified as soon as it becomes available for purchase.

Thank you for your patience and interest in Rubber B."

Thanks for sharing the comments. Definitely building up a lot of anticipation.

WJGESQ · 8 May 2018, 12:19 PM

Too nice a watch to play with rubber.

waterman1 · 8 May 2018, 03:58 PM

I got the same response about this strap being very unique....ok let’s see it! What could they do to it if we can eliminate flaring at the lugs like the dssd? More colored stripes...Not my cup of tea. Venting perhaps - that would make it comfortable. Have to wait and see.

amh · 8 May 2018, 11:19 PM

How about using the rubber strap from a Pelagos? I got one included with mine, should also be the same width as the SD43 lugs.

waterman1 · 9 May 2018, 02:56 AM

The Pelagos strap requires use of endlinks from Pelagos to affix the strap.

brandrea · 9 May 2018, 03:14 AM

Quote:

Originally Posted by Devildog

That could be any super-case sub

I see what you did there

Now Scott, some times it’s not bad when larger up top

VicLeChic · 9 May 2018, 03:24 AM

Maybe they'll come up with an inner flexible metal sheet, Oysterflex style?

amh · 9 May 2018, 03:39 AM

Quote:

Originally Posted by waterman1

The Pelagos strap requires use of endlinks from Pelagos to affix the strap.

Did not know that...

Devildog · 9 May 2018, 05:38 AM

Quote:

Originally Posted by brandrea

I see what you did there

Now Scott, some times it’s not bad when larger up top

Indy11 · 9 May 2018, 06:07 AM

I wish they had an option that would include end links. I believe Everest has leather straps with end links. I think this would go a long way in improving the look of the 6 digit models on rubber. Until then my sub c will remain on its bracelet. The lugs are just to pronounced for my taste when on a strap.

Chadridv · 9 May 2018, 06:37 AM

Quote:

Originally Posted by watchmework

This is the response I received from RubberB when I reached out.

"Hello,

I am sorry but due to manufacturing delays in Switzerland, the Rubber B for the 43mm Seadweller should become available this summer 2018

We apologize again for the wait, but this strap is a more complicated one than most others. It is very unique and will be worth the wait for sure!

If you already are registered on our insiders list below you will be notified as soon as it becomes available for purchase.

Thank you for your patience and interest in Rubber B."

That sounds exciting! I love the DSSD strap they make. Hopefully it also has flared lugs.

watchmework · 9 May 2018, 09:57 AM

Quote:

Originally Posted by VicLeChic

Maybe they'll come up with an inner flexible metal sheet, Oysterflex style?

I’d seriously consider picking up one of these, that’d be awesome.

Jeffs4315 · 5 June 2018, 12:25 AM

Quote:

Originally Posted by waterman1

I spoke to rubber b last week and they told me release will be the end of May.

Any update on this?

GT500 · 5 June 2018, 12:26 AM

Following

Sent from my iPhone using Tapatalk

Devildog · 5 June 2018, 01:34 AM

Quote:

Originally Posted by VicLeChic

I'm looking forward to their strap since I got my SD43 last year. I hope they'll come up with something similar to the Deepsea's, what they call blocked integration where the strap is flush with the outer edge of the lugs.

Me too.

Something like this would be fantastic IMO

Devildog · 5 June 2018, 03:21 AM

Just seen this from Rubber B

“For the first time (and hopefully the last time), a project has been taking this long to complete to perfection. The SD43 strap has actually been in production at the Swiss factory for over a year, and the first few submissions were refused, from what I've heard. Unfortunately, the delay has put the new release date for sometime near the mid or end of this Summer. We are all as anxious and impatient as you, and we apologize for the inconvenience”

Sent from my iPhone using Tapatalk

watchmework · 5 June 2018, 08:45 AM

Quote:

Originally Posted by Devildog

Just seen this from Rubber B

“For the first time (and hopefully the last time), a project has been taking this long to complete to perfection. The SD43 strap has actually been in production at the Swiss factory for over a year, and the first few submissions were refused, from what I've heard. Unfortunately, the delay has put the new release date for sometime near the mid or end of this Summer. We are all as anxious and impatient as you, and we apologize for the inconvenience”

Sent from my iPhone using Tapatalk

I also received a similar response from RubberB today, quoting a mid summer “hopeful” release.

“I apologize we at customer service do not have an exact date but the latest update below ,

I am sorry but due to manufacturing delays in Switzerland, the Rubber B for the 43mm Seadweller should become available this mid summer 2018 hopefully.

We apologize again for the wait, but this strap is a more complicated one than most others. It is very unique and will be worth the wait for sure!

If you already are registered on our insiders list below you will be notified as soon as it becomes available for purchase.

Thank you for your patience and for being a valued Rubber B Customer.

Best regards,

CLICK HERE for INSIDER INFORMATION…

John,

WATCH THE FILM: “A TIMELESS LOVE AFFAIR"- FEATURING ROLEX, PANERAI, AND PATEK PHILIPPE.

Customer Service
RUBBER B- The Ultimate Rubber Strap.
Made in Switzerland
[email protected]
1-(305)-771-2369”

7 May 2018, 09:53 AM	#1
Jeffs4315 "TRF" Member Join Date: Sep 2017 Location: USA Posts: 4	SD43 Rubber Strap Hi Everyone - Long time reader, first time poster. This is a wonderful forum with some great people. I had a quick question for the masses. Has anyone placed a rubber strap on their SD43? If so, does anyone have any recommendations? It appears Everest and Rubberb have yet to release a strap that works with the wider lug length of the SD43. Ideally I would love to use a strap that is compatible with the delopment clasp. Thank you.

7 May 2018, 03:50 PM	#4
waterman1 2024 Pledge Member Join Date: Apr 2012 Location: USA Posts: 889	Rubber b I spoke to rubber b last week and they told me release will be the end of May.

8 May 2018, 03:58 PM	#16
waterman1 2024 Pledge Member Join Date: Apr 2012 Location: USA Posts: 889	Rubber b I got the same response about this strap being very unique....ok let’s see it! What could they do to it if we can eliminate flaring at the lugs like the dssd? More colored stripes...Not my cup of tea. Venting perhaps - that would make it comfortable. Have to wait and see.

5 June 2018, 03:21 AM	#29
Devildog "TRF" Member Join Date: Jul 2009 Real Name: Scott Location: UK Watch: ^^^ for now Posts: 5,797	Just seen this from Rubber B “For the first time (and hopefully the last time), a project has been taking this long to complete to perfection. The SD43 strap has actually been in production at the Swiss factory for over a year, and the first few submissions were refused, from what I've heard. Unfortunately, the delay has put the new release date for sometime near the mid or end of this Summer. We are all as anxious and impatient as you, and we apologize for the inconvenience” Sent from my iPhone using Tapatalk __________________ Past: 6239 (yes, I know...), 16610, 16600, 116515, 116613LN, 126600, 126711 CHNR Present: 16600, 116509, Cartier Santos Green.

7 May 2018, 10:36 AM	#2
JohnLT "TRF" Member Join Date: Oct 2015 Real Name: JohnLT Location: Boston Watch: time fly Posts: 618	Im sure they are in development and will be available asap. The wait will be worth it.

7 May 2018, 12:00 PM	#3
Jeffs4315 "TRF" Member Join Date: Sep 2017 Location: USA Posts: 4	Thanks for the reply. I’ve been monitoring their sites for almost a year now, and I haven’t seen anything. The 904L bracelet is beautiful, I just happen to work in an industry where the watch can take a decent beating. A nice rubber strap would be nice! Thank you.

7 May 2018, 08:49 PM	#6
1William 2024 SubLV41 Pledge Member Join Date: Nov 2010 Location: North Carolina Watch: Rolex/Others Posts: 47,764	Good deal. I look forward to seeing them.

7 May 2018, 11:46 PM	#8
TeddyS "TRF" Member Join Date: Apr 2018 Real Name: Teddy Location: London U.K. Watch: sea-dweller 126600 Posts: 670	+1 I’m really interested to see this Sent from my iPhone using Tapatalk

8 May 2018, 08:56 AM	#13
watchmework "TRF" Member Join Date: Jun 2017 Location: DC Watch: 126710BLRO, 116600 Posts: 7,869	This is the response I received from RubberB when I reached out. "Hello, I am sorry but due to manufacturing delays in Switzerland, the Rubber B for the 43mm Seadweller should become available this summer 2018 We apologize again for the wait, but this strap is a more complicated one than most others. It is very unique and will be worth the wait for sure! If you already are registered on our insiders list below you will be notified as soon as it becomes available for purchase. Thank you for your patience and interest in Rubber B."

8 May 2018, 12:19 PM	#15
WJGESQ Banned Join Date: Jan 2008 Location: Florida Posts: 3,753	Too nice a watch to play with rubber.

8 May 2018, 11:19 PM	#17
amh "TRF" Member Join Date: Oct 2008 Location: Tejas Watch: Various Posts: 5,082	How about using the rubber strap from a Pelagos? I got one included with mine, should also be the same width as the SD43 lugs.

9 May 2018, 02:56 AM	#18
waterman1 2024 Pledge Member Join Date: Apr 2012 Location: USA Posts: 889	The Pelagos strap requires use of endlinks from Pelagos to affix the strap.

9 May 2018, 03:24 AM	#20
VicLeChic Banned Join Date: Jul 2014 Real Name: Victor Location: Spain Watch: YM 116622 - SD43 Posts: 2,598	Maybe they'll come up with an inner flexible metal sheet, Oysterflex style?

9 May 2018, 06:07 AM	#23
Indy11 "TRF" Member Join Date: Apr 2016 Location: Indianapolis Watch: 114060 Posts: 306	I wish they had an option that would include end links. I believe Everest has leather straps with end links. I think this would go a long way in improving the look of the 6 digit models on rubber. Until then my sub c will remain on its bracelet. The lugs are just to pronounced for my taste when on a strap.

5 June 2018, 12:26 AM	#27
GT500 "TRF" Member Join Date: Apr 2017 Real Name: John Location: OH IO Posts: 539	Following Sent from my iPhone using Tapatalk

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)