Not Another SDc Post...

[Ducky]

I don't recall any of the reviews talking about the thickness/height of the new SDc. While looking at a profile shot of the SDc it occurred to me ratios might be a good way to get an approximate height.

The 114060 case length from lug tip to lug tip is about 47mm and caseback to top of crystal is 12mm. 47/12=3.92

The SDc case length (measured on my computer screen) is 63mm and caseback to top of crystal is 20mm. 63/20=3.15

Difference between 114060 and SDc = 3.92/3.15 = 1.244444

So...(47/12)=(47/x)(1.24444) and we solve for x
Assumption here is that since the SDc is "40mm" the lug tip to lug tip is the same as the 114060.

x=12(1.244444) therefore....

The SDc thickness should be about 14.9mm. Half way between the SubC thickness of 12mm and the DSSD thickness of 18mm.

I think I have too much free time on my hands!