ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

AdrianQ · 2 September 2020, 01:56 AM

Can somebody recommend me to someone reliable that can fix this ding? Thank you

Sent from my SM-N975U using Tapatalk

dddrees · 2 September 2020, 02:02 AM

To fix a ding you"ll have to remove metal around the ding. The more you ding the more you polish the more metal you remove.

rodo · 2 September 2020, 02:07 AM

Quote:

Originally Posted by dddrees

To fix a ding you"ll have to remove metal around the ding. The more you ding the more you polish the more metal you remove.

Not necessarily. Can be laser welded.

Blansky · 2 September 2020, 02:09 AM

Yup the only way is polish it down which removes metal, or the adding metal to fill the hole which is a whole different can of worms.

Some of the different polishing cloths and pastes will get it down without too much work but you are still taking away metal.

btinl · 2 September 2020, 02:10 AM

It’s so small. Don’t bother. Watches are meant to be worn.

Tools · 2 September 2020, 02:13 AM

If you try to fix every ding or scratch, you end up with a patchwork case and are not really doing your watch a good deed.

dddrees · 2 September 2020, 02:29 AM

Quote:

Originally Posted by rodo

Not necessarily. Can be laser welded.

Yeah, so great, so popular, looks so good, it's not even on my radar.

But please do tell an educate me and provide any proof where this is something that I should even possibly consider for my Rolex especially for such a small ding as the one the OP has.

SearChart · 2 September 2020, 02:34 AM

Quote:

Originally Posted by dddrees

Yeah, so great, so popular, looks so good, it's not even on my radar.

But please do tell an educate me and provide any proof where this is something that I should even possibly consider for my Rolex especially for such a small ding as the one the OP has.

It's certainly possible to weld small dings like this, have done it myself plenty of times. Actually much easier to do something like this than a large dent.

dddrees · 2 September 2020, 02:37 AM

Quote:

Originally Posted by SearChart

It's certainly possible to weld small dings like this, have done it myself plenty of times. Actually much easier to do something like this than a large dent.

I'm listening, still thinking it wouldn't be something I wouldn't chose to do, but I'm still listening as I might learn something.

sco · 2 September 2020, 02:37 AM

I have almost the exact same ding in the same place on my sub. Personally I'm just waiting until service time to have it taken care of.

AzPaul · 2 September 2020, 02:38 AM

Your effort would be better spent coming up with a great 'ding' story.

SearChart · 2 September 2020, 02:40 AM

Quote:

Originally Posted by dddrees

I'm listening, still thinking it wouldn't be something I wouldn't chose to do, but I'm still listening as I might learn something.

Not saying that you or anyone else should immediately weld something like this, but it is certainly possible.

Personally I'm not in favour of polishing any of my watches, let alone welding it.

beshannon · 2 September 2020, 02:42 AM

Quote:

Originally Posted by AdrianQ

Can somebody recommend me to someone reliable that can fix this ding? Thank you

Sent from my SM-N975U using Tapatalk

RSC?

Personally I would leave it

dddrees · 2 September 2020, 02:43 AM

Quote:

Originally Posted by SearChart

Not saying that you or anyone else should immediately weld something like this, but it is certainly possible.

Personally I'm not in favour of polishing any of my watches, let alone welding it.

Oh, I wouldn't personally do it. What a mistake that would be.

No, I thought maybe you could enlighten me as to how good a process this might be.

RichM · 2 September 2020, 02:56 AM

How close are you to needing a full service? If close, I’d send it to Rolliworks in Ca. They’ll take care of that.

If not close to service, leave it be.

42itus · 2 September 2020, 02:56 AM

I had a bigger accident with my one week old watch. I have dings on older watches that I won’t repair but I really wanted to fix this one because it was brand new. Rolliworks did an amazing job.

Sent from my iPhone using Tapatalk

AdrianQ · 2 September 2020, 02:57 AM

Quote:

Originally Posted by sco

I have almost the exact same ding in the same place on my sub. Personally I'm just waiting until service time to have it taken care of.

Okay might just wait until I send for service. Any idea what Rolex charges for something like this? Thanks

Sent from my SM-N975U using Tapatalk

swils8610 · 2 September 2020, 02:58 AM

I’d leave it alone personally. If not, send it to Rikki. His laser welding is amazing. Again...leave it alone.

Sent from my iPhone using Tapatalk Pro

AdrianQ · 2 September 2020, 02:58 AM

I've only had the watch for about 2 years

Sent from my SM-N975U using Tapatalk

SearChart · 2 September 2020, 02:59 AM

Quote:

Originally Posted by dddrees

Oh, I wouldn't personally do it. What a mistake that would be.

No, I thought maybe you could enlighten me as to how good a process this might be.

Ah I see, you're just trolling.

JParm · 2 September 2020, 03:14 AM

That's nothing!

I've got a similar ding on my Hulk; no big deal.

dddrees · 2 September 2020, 03:15 AM

Quote:

Originally Posted by SearChart

Ah I see, you're just trolling.

No, but I still have serious doubts to it's merits but I'm still willing to listen. Convince me I'm wrong and I might learn something.

AdrianQ · 2 September 2020, 03:58 AM

Quote:

Originally Posted by [email protected]

That's nothing!

I've got a similar ding on my Hulk; no big deal.

Sent from my SM-N975U using Tapatalk

AdrianQ · 2 September 2020, 03:58 AM

Quote:

Originally Posted by 42itus

I had a bigger accident with my one week old watch. I have dings on older watches that I won’t repair but I really wanted to fix this one because it was brand new. Rolliworks did an amazing job.

Sent from my iPhone using Tapatalk

Niceee great work. I will look into them, thanks

Sent from my SM-N975U using Tapatalk

AdrianQ · 2 September 2020, 04:05 AM

Quote:

Originally Posted by swils8610

I’d leave it alone personally. If not, send it to Rikki. His laser welding is amazing. Again...leave it alone.

Sent from my iPhone using Tapatalk Pro

How can I find Rikki contact info? Thanks

Sent from my SM-N975U using Tapatalk

The Joker · 2 September 2020, 04:09 AM

Adds character.

You'll ding it again few weeks.

walds11 · 2 September 2020, 04:26 AM

Quote:

Originally Posted by SearChart

Ah I see, you're just trolling.

I was going to say the same thing

I’ve heard nothing but good results on welding dings on watch cases.

Speedbird-1 · 2 September 2020, 05:59 AM

Quote:

Originally Posted by SearChart

Not saying that you or anyone else should immediately weld something like this, but it is certainly possible.

Personally I'm not in favour of polishing any of my watches, let alone welding it.

Please, excuse my ignorance Bas, but would it be possible, with something slightly harder than 904, to slowly and carefully, 'roll' the metal back into shape"?

Just wondering.

Blansky · 2 September 2020, 06:38 AM

Quote:

Originally Posted by Speedbird-1

Please, excuse my ignorance Bas, but would it be possible, with something slightly harder than 904, to slowly and carefully, 'roll' the metal back into shape"?

Just wondering.

Ya mean take it to Bob's Auto Repair and Body Shop.

"Scrapes and Dings, we fix all dem things"

Ferdelious · 2 September 2020, 06:53 AM

OP are you trying to sell or trade the watch? If not, I would leave it alone. That ding is too small to fret over.

If you must have it repaired, Rolliworks seems to be the best place to send it. Those guys do magic when restoring cases.

2 September 2020, 01:56 AM	#1
AdrianQ "TRF" Member Join Date: Oct 2016 Location: Texas Posts: 72	Fixing a ding Can somebody recommend me to someone reliable that can fix this ding? Thank you Sent from my SM-N975U using Tapatalk

2 September 2020, 02:02 AM	#2
dddrees "TRF" Member Join Date: May 2010 Real Name: Dan Location: USA Watch: This N That Posts: 34,253	To fix a ding you"ll have to remove metal around the ding. The more you ding the more you polish the more metal you remove. __________________ When it captures your imagination, that's when you know you have found your passion. Loyal Foot Soldier of The Nylon Nation. Card Carrying Member of the Global Association of Retro-Grouch-Curmudgeons

2 September 2020, 02:09 AM	#4
Blansky 2024 Pledge Member Join Date: Feb 2013 Location: swmnpoolsmovie* Posts: 9,809	Yup the only way is polish it down which removes metal, or the adding metal to fill the hole which is a whole different can of worms. Some of the different polishing cloths and pastes will get it down without too much work but you are still taking away metal. __________________ OlllllllO

2 September 2020, 02:13 AM	#6
Tools TRF Moderator & 2024 SubLV41 Patron Join Date: May 2007 Real Name: Larry Location: Mojave Desert Watch: GMT's Posts: 43,516	If you try to fix every ding or scratch, you end up with a patchwork case and are not really doing your watch a good deed. __________________ (Chill ... It's just a watch Forum.....) NAWCC Member

2 September 2020, 02:38 AM	#11
AzPaul 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: May 2012 Real Name: Paul Location: Tucson, Az Watch: Rolex 1501 Posts: 13,904	Your effort would be better spent coming up with a great 'ding' story. __________________ Ain't much of a crime, whacking a surly bartender

2 September 2020, 02:10 AM	#5
btinl 2024 Pledge Member Join Date: Aug 2010 Location: . Watch: on my wrist Posts: 1,973	It’s so small. Don’t bother. Watches are meant to be worn.

2 September 2020, 02:37 AM	#10
sco "TRF" Member Join Date: Dec 2013 Location: Chicago Watch: Subc AT 8500 CSO Posts: 3,646	I have almost the exact same ding in the same place on my sub. Personally I'm just waiting until service time to have it taken care of.

2 September 2020, 02:56 AM	#15
RichM 2024 SubLV41 Pledge Member Join Date: Mar 2015 Real Name: Richie Location: "Nowhere Man" Watch: out now,take care! Posts: 29,780	How close are you to needing a full service? If close, I’d send it to Rolliworks in Ca. They’ll take care of that. If not close to service, leave it be. __________________ "I love to work at nothing all day" TRF #139960

2 September 2020, 02:56 AM	#16
42itus "TRF" Member Join Date: Sep 2018 Real Name: Tom Location: Honolulu Watch: 116519LN Posts: 3,828	I had a bigger accident with my one week old watch. I have dings on older watches that I won’t repair but I really wanted to fix this one because it was brand new. Rolliworks did an amazing job. Sent from my iPhone using Tapatalk

2 September 2020, 02:58 AM	#18
swils8610 2024 SubLV41 Pledge Member Join Date: Sep 2012 Real Name: shannon Location: usa Posts: 9,211	I’d leave it alone personally. If not, send it to Rikki. His laser welding is amazing. Again...leave it alone. Sent from my iPhone using Tapatalk Pro

2 September 2020, 03:14 AM	#21
JParm 2024 ROLEX DATEJUST41 Pledge Member Join Date: Aug 2010 Location: NorCal Watch: Yes! Posts: 6,568	That's nothing! I've got a similar ding on my Hulk; no big deal. __________________

2 September 2020, 04:09 AM	#26
The Joker "TRF" Member Join Date: Sep 2010 Location: Gotham Posts: 9,641	Adds character. You'll ding it again few weeks.

2 September 2020, 06:53 AM	#30
Ferdelious 2024 SubLV41 Pledge Member Join Date: May 2013 Real Name: Matt Location: Tampa, FL Watch: Hulk/SD4K/SeaQ/P39 Posts: 3,203	OP are you trying to sell or trade the watch? If not, I would leave it alone. That ding is too small to fret over. If you must have it repaired, Rolliworks seems to be the best place to send it. Those guys do magic when restoring cases. __________________ Why is it, "A penny for your thoughts," but, "you have to put your two cents in?" Somebody's making a penny.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode