Watch tools

[Boothy84]

Hi guys, i want to get some basic watch tools for myself, i'm a complete newbie when it comes to swapping out bracelets and links etc so i have no idea what's good or bad.

Anybody with experience point me in the right direction?

Thanks

[SoylentGreenChi]

I just had this exact question, and from what I could learn, the consensus is that the Bergeon 7825 tool is what you need for the bracelet swapping. I just bought one this week. There are good videos online with folks showing how to use it.

Also, these are useful threads:
https://www.rolexforums.com/showthread.php?t=616376

https://www.rolexforums.com/showthread.php?t=571548

[fskywalker]

Bergeon 6825 and 7825 are good for removing bracelet (more expensive), Bergeon 6767F is a cheaper alternative for the task. Here a picture of my 6825 / 6767F :




As for removing links the size of the screwdriver will depend on the bracelet style. Esslinger sells a very nice deluxe kit for removing Rolex links, picture below:

[copperjohn]

I bought a small tool set on Amazon for about $16 at the time. The tools for removing links work just fine. And that Bergeon (above) is nice.

[copperjohn]

Originally Posted by fskywalker

Bergeon 6825 and 7825 are good for removing bracelet (more expensive), Bergeon 6767F is a cheaper alternative for the task. Here a pocture of my 6825 / 6767F :



As for removing links the size of the screwdriver will depend on the bracelet style. Esslinger sells a very nice kit for removing Rolex links, picture below:


Sent from my iPhone using Tapatalk Pro

Did your pictures attach, or am I the only one that can’t see them.

[Watch2019]

Buy quality tools such as Bergeon’s since you will be using them on your Rolex. The cheap ones from China for example may break or malfunction easily, marring your bracelets or screws.

[fskywalker]

Originally Posted by copperjohn

Did your pictures attach, or am I the only one that can’t see them.

Check now, apparently they did not upload correctly before


Sent from my iPhone using Tapatalk Pro

[copperjohn]

I see it, thanks!

[fskywalker]

Originally Posted by copperjohn

I see it, thanks!

The deluxe screwdriver set is out of stock, they do have in stock this one which is great as well (same as the gold
one on the kit above, but green body)



Specs below:

-Special blade to fit Rolex bracelet screws
-Aluminum handle with hardened steel blades
-1.30mm and 1.70mm flat end blade
-0.90mm pointed tip
-Length is 5"

https://www.esslinger.com/horofix-sc...tips-included/


Sent from my iPhone using Tapatalk Pro

[Bizcut1]

Originally Posted by Boothy84

Hi guys, i want to get some basic watch tools for myself, i'm a complete newbie when it comes to swapping out bracelets and links etc so i have no idea what's good or bad.

Anybody with experience point me in the right direction?

Thanks

Get ready to enjoy some completely unnecessary scratches on your watch.

Practice on a Timex before you weep over what you did to your Rolex.

Or, find a great jeweler to handle the expensive stuff and scratch your itch (and your watch) on something a lot cheaper.

Believe me, I speak from sad experience. Many here will urge you to do it yourself but they won't be around when you gouge or scratch your watch.

Which you will.

Ben

[Boothy84]

Originally Posted by Bizcut1

Get ready to enjoy some completely unnecessary scratches on your watch.

Practice on a Timex before you weep over what you did to your Rolex.

Or, find a great jeweler to handle the expensive stuff and scratch your itch (and your watch) on something a lot cheaper.

Believe me, I speak from sad experience. Many here will urge you to do it yourself but they won't be around when you gouge or scratch your watch.

Which you will.

Ben

Haha, i get your point but really? Is it THAT difficult to remove a spring bar? and screw/unscrew a link? I'm fairly good with my hands and i'd like to think i am capable

[Driver8]

Originally Posted by fskywalker

Exactly the same kit that I have. I don't like to get involved with the internals of my watches, but bracelet/strap changing/adjustment is fine. The 6825 and 6767F make bracelet removal a breeze, and the Horofix screwdrivers are superb for bracelet adjustment. The only other tool I use with the Rolexes is a Bergeon x5 loupe (which can be both a blessing and a curse! )

[fskywalker]

Originally Posted by Boothy84

Haha, i get your point but really? Is it THAT difficult to remove a spring bar? and screw/unscrew a link? I'm fairly good with my hands and i'd like to think i am capable

You can always tape the lugs for extra protection, as shown here:




Sent from my iPhone using Tapatalk Pro

[Little machines]

I think it's great when you're able to remove straps, bracelets and links. I would definitely scratch the watch . I let my jeweler take care of it. Also nice tool kit from Esslinger.
Good luck!!

[Bizcut1]

Originally Posted by Boothy84

Haha, i get your point but really? Is it THAT difficult to remove a spring bar? and screw/unscrew a link? I'm fairly good with my hands and i'd like to think i am capable

Maybe. Not all spring bars and their fittings and construction are created the same. The same with links. The first time you have to take a blowtorch
or your lighter to a $15,000 Rolex to loosen some Loctite in a link, you may wondering how the hell you got there...

And, you're right, some do their own work. I can see where it would be an enjoyable task, if qualified and it goes well.

YMMV (definitely).

Either way, good luck!

[Jocke]

This is a good start kit. I use to have it with me when I visit watch fairs if I should buy a watch and wants to inspect it. Sometimes
I have it with me when I visit friends that needs something adjusted at their watches.

[Bizcut1]

Originally Posted by Jocke

This is a good start kit. I use to have it with me when I visit watch fairs if I should buy a watch and wants to inspect it. Sometimes
I have it with me when I visit friends that needs something adjusted at their watches.

Nice kit!

[Brich436]

Bergeron 7825 or Horofix tweezers if you plan on changing Rolex or Tudor bracelets


Sent from my iPhone using Tapatalk

[TexSub]

Does the 126610 braclet use the 1.30mm or 1.70mm screwdriver blade?

[214270Explorer]

Originally Posted by TexSub

Does the 126610 braclet use the 1.30mm or 1.70mm screwdriver blade?

You should get both. The larger for the Oyster bracelets and the smaller for the Jubilee bracelets. Then you are totally covered for Rolex.