ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

illiguy · 25 March 2022, 09:36 PM

Normally prefer to keep my watches away from a polishing wheel, as I’ll inevitably just put marks back on from everyday wear.

My Kermit, however, has a ding on one of the permanent bracelet links. Visually, doesn’t bother me, but if I run my finger across it, I definitely can “feel” the blemish.

Watch will be going in for service. The case remains unpolished and prefer to leave it that way. Torn whether to have the bracelet ding worked on.

Thoughts? I don’t want to make a small problem worse with a crapshoot RSC job, but would be great if it could be worked out a bit without losing edges, etc.

***

Sent from my iPad using Tapatalk

jets · 25 March 2022, 10:07 PM

There’s metal missing, doubtful they can do anything without adverse effects. Just get a replacement bracelet if need be. At least it’s not the watch case

Sent from my iPhone using Tapatalk

dpt.calvin · 25 March 2022, 10:47 PM

Would that need laser welding?

brandrea · 25 March 2022, 10:58 PM

That’s nasty looking … I’d be inclined to want it repaired honestly. I get what you’re saying about scratches and scuffs, but to my eye, that would bother me.

I’d maybe research sending the bracelet to a someone like Michael Young, see what he says

jgottsman11 · 25 March 2022, 11:07 PM

Send it to Rolliworks or LA Watch Works and have the pros laser weld it and make it new again. RSC may give you a hack job. it's hit or miss

illiguy · 25 March 2022, 11:18 PM

Would another option be simply sourcing the non-removable 93250 bracelet part and retaining all the removable links/clasp? That seems more economical.

I am no bracelet expert.

edisonstar23 · 25 March 2022, 11:22 PM

I feel your pain and to be honest I will leave it as that if you against polishing like myself. Just curious, how did it happen?

Driver8 · 25 March 2022, 11:23 PM

As others have said, send just the bracelet to a laser-welding pro. The results I've seen are are fantastic, so that would be my number one option.

Failing that, I'd be tempted to try RSC and if you don't like the result, just bite the bullet and get a new bracelet.

hitman23 · 25 March 2022, 11:27 PM

I would leave it as is. Never know how it turns out.

If it really bothers you, buy a preowned one to wear in the meantime.

afjag256 · 25 March 2022, 11:41 PM

Couldn’t they just swap out the link?

illiguy · 26 March 2022, 12:39 AM

Quote:

Originally Posted by afjag256

Couldn’t they just swap out the link?

I think it’s more than a single link. It would be the 4 permanent links including the 801 SEL.

GRabens · 26 March 2022, 06:13 AM

I always felt one of the benefits of having RSC work on a watch is that they have the means to make any mistake right. In other words, if they do a botch-up job on your bracelet they could easily replace it on them. Likely not the case if you go with an independent watchmaker.

Of course since they are permanent links RSC may just tell you that the bracelet needs to be replaced or left as-is.

Roddypeepa · 26 March 2022, 07:20 AM

Surely they can just replace that one link?! No new bracelet needed

Sent from my iPhone using Tapatalk

THC · 26 March 2022, 07:28 AM

Where is Bas?

rmagoo57 · 26 March 2022, 07:38 AM

Quote:

Originally Posted by Roddypeepa

Surely they can just replace that one link?! No new bracelet needed

That's the route I would pursue - replace the damaged link. Keep us posted on what you do. Great watch!!

Dirt · 26 March 2022, 08:59 AM

Quote:

Originally Posted by jgottsman11

Send it to Rolliworks or LA Watch Works and have the pros laser weld it and make it new again. RSC may give you a hack job. it's hit or miss

Agreed

fskywalker · 27 March 2022, 06:11 AM

You can simply replace the 4 link permanent section with endlink with a donor one and problem solved; not sure however how easy would be to find one.

The other option is just to have laser welding on the damaged link; doubt RSC would do that (they will likely just offer you to replace the whole bracelet) but an easy job for LAWW, Rolliworks or any other major restoration shop. Hope this helps!

Sent from my iPhone using Tapatalk Pro

nachopc · 27 March 2022, 06:30 AM

Quote:

Originally Posted by afjag256

Couldn’t they just swap out the link?

This

Sent from my iPhone using Tapatalk Pro

illiguy · 27 March 2022, 07:13 AM

Quote:

Originally Posted by fskywalker

You can simply replace the 4 link permanent section with endlink with a donor one and problem solved; not sure however how easy would be to find one.

The other option is just to have laser welding on the damaged link; doubt RSC would do that (they will likely just offer you to replace the whole bracelet) but an easy job for LAWW, Rolliworks or any other major restoration shop. Hope this helps!

Sent from my iPhone using Tapatalk Pro

Going to take this route.

burnthesehills · 27 March 2022, 07:38 AM

If it visually does not bother you, why bother? I can’t imagine you would need to run your finger across it very often.

Personally I would fix it.

Great watch by the way!

25 March 2022, 09:36 PM	#1
illiguy 2024 SubLV41 Pledge Member Join Date: Dec 2013 Location: UTC/GMT -5 Posts: 3,661	16610LV (“Kermit”) Advice Normally prefer to keep my watches away from a polishing wheel, as I’ll inevitably just put marks back on from everyday wear. My Kermit, however, has a ding on one of the permanent bracelet links. Visually, doesn’t bother me, but if I run my finger across it, I definitely can “feel” the blemish. Watch will be going in for service. The case remains unpolished and prefer to leave it that way. Torn whether to have the bracelet ding worked on. Thoughts? I don’t want to make a small problem worse with a crapshoot RSC job, but would be great if it could be worked out a bit without losing edges, etc. *** Sent from my iPad using Tapatalk

25 March 2022, 10:07 PM	#2
jets "TRF" Member Join Date: Dec 2008 Real Name: Mario Location: CANADA Posts: 2,483	There’s metal missing, doubtful they can do anything without adverse effects. Just get a replacement bracelet if need be. At least it’s not the watch case Sent from my iPhone using Tapatalk __________________ ♛ DJII 116234 · Submariner 126610LV · Yacht Master 42 226659 ✿ Pelagos 25600TN Ω X-33 Speedmaster Skywalker · 1861 Speedmaster Modsukoshi · SMP 2254.50 · SMP 2230.50 NAC · Seamaster 300 166.0324 · Genève 162.037 Seiko SLA033 Willard · SKX007

25 March 2022, 10:47 PM	#3
dpt.calvin "TRF" Member Join Date: Jun 2020 Location: TRF Posts: 2,270	Would that need laser welding? __________________ 16570 \| 16710 \| 116710 \| 116500 76214 \| 79090 \| 79030 \| 79830

25 March 2022, 11:07 PM	#5
jgottsman11 2024 Pledge Member Join Date: Mar 2016 Location: wHerE do U liv Watch: President Posts: 1,447	Send it to Rolliworks or LA Watch Works and have the pros laser weld it and make it new again. RSC may give you a hack job. it's hit or miss __________________ 5164R Aquanaut "Tiffany & Co" 18238 Champagne Day Date

25 March 2022, 11:23 PM	#8
Driver8 "TRF" Member Join Date: Jan 2017 Location: UK Posts: 2,874	As others have said, send just the bracelet to a laser-welding pro. The results I've seen are are fantastic, so that would be my number one option. Failing that, I'd be tempted to try RSC and if you don't like the result, just bite the bullet and get a new bracelet. __________________ Rolex - 116710BLNR : 116610LN : 116622 : 116334 : 14060M (Plus - Glashutte Original, Breitling, Omega, IWC, Tag Heuer, Doxa, Sinn, Seiko, G-Shock + micros)

25 March 2022, 10:58 PM	#4
brandrea 2024 SubLV41 Pledge Member Join Date: Jul 2013 Real Name: Brian (TBone) Location: canada Watch: es make me smile Posts: 77,938	That’s nasty looking … I’d be inclined to want it repaired honestly. I get what you’re saying about scratches and scuffs, but to my eye, that would bother me. I’d maybe research sending the bracelet to a someone like Michael Young, see what he says

25 March 2022, 11:18 PM	#6
illiguy 2024 SubLV41 Pledge Member Join Date: Dec 2013 Location: UTC/GMT -5 Posts: 3,661	Would another option be simply sourcing the non-removable 93250 bracelet part and retaining all the removable links/clasp? That seems more economical. I am no bracelet expert.

25 March 2022, 11:22 PM	#7
edisonstar23 "TRF" Member Join Date: Jun 2014 Location: NYC Posts: 488	I feel your pain and to be honest I will leave it as that if you against polishing like myself. Just curious, how did it happen?

25 March 2022, 11:27 PM	#9
hitman23 "TRF" Member Join Date: Feb 2012 Location: ny Posts: 765	I would leave it as is. Never know how it turns out. If it really bothers you, buy a preowned one to wear in the meantime.

25 March 2022, 11:41 PM	#10
afjag256 "TRF" Member Join Date: Oct 2013 Location: New Orleans Posts: 175	Couldn’t they just swap out the link?

26 March 2022, 06:13 AM	#12
GRabens "TRF" Member Join Date: Dec 2009 Location: FL Watch: Too Many Rolex! Posts: 593	I always felt one of the benefits of having RSC work on a watch is that they have the means to make any mistake right. In other words, if they do a botch-up job on your bracelet they could easily replace it on them. Likely not the case if you go with an independent watchmaker. Of course since they are permanent links RSC may just tell you that the bracelet needs to be replaced or left as-is.

26 March 2022, 07:20 AM	#13
Roddypeepa "TRF" Member Join Date: Feb 2019 Real Name: Mark Location: Southern England Watch: DJ41 SubC SMP mast Posts: 1,683	Surely they can just replace that one link?! No new bracelet needed Sent from my iPhone using Tapatalk

26 March 2022, 07:28 AM	#14
THC 2024 SubLV41 Pledge Member Join Date: Jun 2013 Real Name: Tom Location: Mandeville La Watch: 126333 Posts: 10,664	Where is Bas?

27 March 2022, 06:11 AM	#17
fskywalker 2024 Pledge Member Join Date: Aug 2014 Real Name: Francisco Location: San Juan, PR Watch: Is Ticking ! Posts: 25,168	You can simply replace the 4 link permanent section with endlink with a donor one and problem solved; not sure however how easy would be to find one. The other option is just to have laser welding on the damaged link; doubt RSC would do that (they will likely just offer you to replace the whole bracelet) but an easy job for LAWW, Rolliworks or any other major restoration shop. Hope this helps! Sent from my iPhone using Tapatalk Pro __________________ Francisco ♛ 16610 / 116264 Ω 168.022 / 2535.80.00 / 310.30.42.50.01.002 / 210.90.42.20.01.001 Zenith 02.480.405 2FA security enabled

27 March 2022, 07:38 AM	#20
burnthesehills "TRF" Member Join Date: Jan 2019 Real Name: Joe Location: Western MA Posts: 1,211	If it visually does not bother you, why bother? I can’t imagine you would need to run your finger across it very often. Personally I would fix it. Great watch by the way!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode