The Rolex Forums   The Rolex Watch

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Old 28 March 2024, 09:39 AM   #1
andrewjb88
"TRF" Member
 
andrewjb88's Avatar
 
Join Date: May 2018
Location: United Kingdom
Watch: 16302 Rolex OP
Posts: 767
Polish or not?

Hi all,

I'm getting married in just over two weeks,I am going to wear my late fathers 16203 as pictured below, I had it serviced back in 2019 but insisted it wasn't polished at all as it was my dads watch and wanted to keep all the marks on it that dad had made!





I was chatting to a bloke in a shop the other day who had a more modern version of the watch and naturally the watch was a lot shinier and popped more which made me think that my watch needs/deserves a bit of a polish up.

Should I or Shouldn't I give it a quick polish up with something like a cape cod? nothing mad just a light rub on the gold sections for a few seconds?

I dont have time to send it anywhere now or just leave it?
__________________
Rolex Datejust 16203
Omega Seamaster Professional 300m
Tudor BB GMT
Luch one hand
andrewjb88 is offline   Reply With Quote
Old 28 March 2024, 09:44 AM   #2
Calatrava r
2024 SubLV41 Pledge Member
 
Join Date: Mar 2017
Location: United States
Watch: Rolex and Patek
Posts: 11,431
I would leave it alone. It looks great as it is. If at some point you want to have it polished, have it done by a professional. Your Dad probably liked it the way it looks. Each scratch has memories.
Calatrava r is offline   Reply With Quote
Old 28 March 2024, 09:45 AM   #3
omar-rye
"TRF" Member
 
omar-rye's Avatar
 
Join Date: Feb 2020
Location: Underground
Posts: 2,671
Just leave it. Cape cod can turn disastrous
omar-rye is offline   Reply With Quote
Old 28 March 2024, 09:46 AM   #4
Auto16610
"TRF" Member
 
Auto16610's Avatar
 
Join Date: Apr 2010
Real Name: Scott
Location: Santa Cruz
Watch: RolexOmegaPanerai
Posts: 1,182
Only professionally!

Leave it to Rolex by experts. You can't undue mistakes. Congratulations on your upcoming wedding!
Auto16610 is offline   Reply With Quote
Old 28 March 2024, 09:54 AM   #5
Hardtimes
Banned
 
Join Date: Jan 2023
Location: USA
Watch: 118238
Posts: 831
Professionally YES!
Hardtimes is offline   Reply With Quote
Old 28 March 2024, 11:41 AM   #6
Jefferyasher
"TRF" Member
 
Join Date: Jun 2014
Location: Ohio
Posts: 361
I recently had my Sub serviced and opted out of a polish and here's why - you take off metal to eliminate scratches to just add more scratches with less metal.
Jefferyasher is offline   Reply With Quote
Old 28 March 2024, 04:21 PM   #7
Airkingchnr
"TRF" Member
 
Join Date: Oct 2020
Location: England
Posts: 178
No one need get a professional polish when there is JOOLTOOL
How about JOOLTOOL at the tradeshow. Daytona polish
She is so good she doesn't have to remove the bracelet ... A Rolex service center could not do a polish like this
Watch from 20 minutes in the see the perfect bracelet and daytona bezel polish ... enjoy.

https://youtu.be/21DrOx3RjDA?si=O4ewgxpUfCCM14dE
Airkingchnr is offline   Reply With Quote
Old 28 March 2024, 04:34 PM   #8
omar-rye
"TRF" Member
 
omar-rye's Avatar
 
Join Date: Feb 2020
Location: Underground
Posts: 2,671
Quote:
Originally Posted by Airkingchnr View Post
How about JOOLTOOL at the tradeshow. Daytona polish
She is so good she doesn't have to remove the bracelet ... A Rolex service center could not do a polish like this
Watch from 20 minutes in the see the perfect bracelet and daytona bezel polish ... enjoy.

https://youtu.be/21DrOx3RjDA?si=O4ewgxpUfCCM14dE
Hard to detect the sarcasm but I hope you’re being sarcastic
omar-rye is offline   Reply With Quote
Old 28 March 2024, 04:58 PM   #9
andrewjb88
"TRF" Member
 
andrewjb88's Avatar
 
Join Date: May 2018
Location: United Kingdom
Watch: 16302 Rolex OP
Posts: 767
Think I will just give it a quick clean and leave it as is.
__________________
Rolex Datejust 16203
Omega Seamaster Professional 300m
Tudor BB GMT
Luch one hand
andrewjb88 is offline   Reply With Quote
Old 28 March 2024, 05:10 PM   #10
Nav01L
"TRF" Member
 
Nav01L's Avatar
 
Join Date: Apr 2012
Real Name: Fred
Location: Zurich
Posts: 2,697
I have nothing but good things to say about Poland but I’m pretty sure that one is Swiss.
__________________
Greetings from Switzerland

Remember, the dignity you surrender at your AD‘s doorstep will never be recovered by wearing the watch he may get you.
Nav01L is offline   Reply With Quote
Old 28 March 2024, 05:26 PM   #11
996marty
"TRF" Member
 
996marty's Avatar
 
Join Date: May 2019
Location: Uk
Watch: RolexGMT/Tudor7928
Posts: 4,182
I’d leave it as it is they are made to be worn and scratches are a part of it
996marty is offline   Reply With Quote
Old 28 March 2024, 05:32 PM   #12
Andad
2024 SubLV41 Pledge Member
 
Andad's Avatar
 
Join Date: Nov 2006
Real Name: Eddie
Location: Australia
Watch: A few.
Posts: 37,540
Quote:
Originally Posted by omar-rye View Post
Hard to detect the sarcasm but I hope you’re being sarcastic
He is joking.

Or a



He has posted about this watch abuse.
__________________
E

Andad is offline   Reply With Quote
Old 28 March 2024, 07:47 PM   #13
travisb
2024 SubLV41 Pledge Member
 
travisb's Avatar
 
Join Date: Aug 2009
Real Name: Travis
Location: FL / NYC
Watch: Yes..
Posts: 33,500
I would not touch it with a Cape Cod. If you want a proper polish, take it to a professional watchmaker or RSC.
travisb is offline   Reply With Quote
Old 28 March 2024, 07:49 PM   #14
Airkingchnr
"TRF" Member
 
Join Date: Oct 2020
Location: England
Posts: 178
Quote:
Originally Posted by Andad View Post
He is joking.

Or a



He has posted about this watch abuse.
Joking .. showing the opposite to the professional yes comment
There's professional.. yes and
This abomination..... no. No way ... never
Always get the best if you want a watch polished...
Airkingchnr is offline   Reply With Quote
Old 28 March 2024, 08:18 PM   #15
joli160
2024 SubLV41 Pledge Member
 
joli160's Avatar
 
Join Date: Apr 2013
Location: NL
Watch: Yachtmaster
Posts: 14,763
The center links look dull indeed.

Use a sunshine cloth and tape off the brushed area. Don’t worry about removing material or changing the case lines. It will take a month of 24/7 polishing before you remove so much material that you can even measure it.

Half hour would change the appearance enough to bring back the shine
__________________
Day Date 18238, Yachtmaster 16622, Deepsea 116660, Submariner 116619, SkyD 326935, DJ 178271, DJ 69158, Yachtmaster 169622, GMT 116713LN, GMT 126711.
joli160 is offline   Reply With Quote
Old 28 March 2024, 08:27 PM   #16
padi56
"TRF" Life Patron
 
padi56's Avatar
 
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 53,064
Today there is a anti polish syndrome gods knows why, my working tool 16600 SD has been polish now by 4 different RSC world wide. And it had a very hard life as a real working tool watch underwater, now almost 25 years old still looks good today.
__________________

ICom Pro3

All posts are my own opinion and my opinion only.

"The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever."
Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again.

www.mc0yad.club

Second in command CEO and left handed watch winder
padi56 is offline   Reply With Quote
Old 28 March 2024, 08:59 PM   #17
omar-rye
"TRF" Member
 
omar-rye's Avatar
 
Join Date: Feb 2020
Location: Underground
Posts: 2,671
Quote:
Originally Posted by padi56 View Post
Today there is a anti polish syndrome gods knows why, my working tool 16600 SD has been polish now by 4 different RSC world wide. And it had a very hard life as a real working tool watch underwater, now almost 25 years old still looks good today.
Not against polishing, but against doing it yourself with Cape Cod.
omar-rye is offline   Reply With Quote
Old 28 March 2024, 09:03 PM   #18
1William
2024 SubLV41 Pledge Member
 
Join Date: Nov 2010
Location: North Carolina
Watch: Rolex/Others
Posts: 47,801
I would not but if I did it would go to a professional to do the job.
1William is offline   Reply With Quote
Old 28 March 2024, 09:39 PM   #19
rmlovett1
2024 SubLV41 Pledge Member
 
rmlovett1's Avatar
 
Join Date: Sep 2015
Real Name: Richard
Location: GA
Watch: YTBD
Posts: 23,513
Sentimentally, I’d leave it as is.
rmlovett1 is offline   Reply With Quote
Old 28 March 2024, 10:24 PM   #20
karleone
"TRF" Member
 
Join Date: Feb 2012
Location: Dayona
Posts: 2,269
Do not listen to people telling you polish it.


I always ask my watch not to be polished during service and made it written. Why? Because my watches are either unpolished or repolished but very well done so I don’t want to take the risks Rolex messing up with polish. Whatever people who are fan of polishing says a repolished watch would never look as good as a factory unpolished Rolex. Especially on 4/5 digits Sub/SD/GMT/Explo 2 where the case have bevels/ chamfers most of watches after a repolish lose these bevels/ chamfers that were originally there when the watch left the factory. It’s very common to see as well rounded lugs, lug holes surface not sharp, rounded crown guards, lug holes too close from bevel/ chamfer if still there etc. An additional problem is lugs not being V brushed as it supposed to be on 4/5 digits or with a grain different from Rolex factory finish. People saying a Rolex will come back as new after RSC are just not enough knowledgeable. On a 4/5 digits best case your watch has been repolished by an expert like Rolliworks or LAWW or someone very qualified at RSC and it will look decent / great (but not 100% orignal factory finish). Worst case your watch has been polished not by an expert (and it happens a lot even by Rolex RSC) and your watch has no more scratches so form a non expert looks new but someone who know about polish / repolish will be able to say watch has been repolished and it won’t look as good / not as sharp as initially
karleone is offline   Reply With Quote
Old 28 March 2024, 10:47 PM   #21
pk552502
2024 Pledge Member
 
Join Date: Apr 2021
Real Name: Paul
Location: ohio
Watch: 16570 black
Posts: 514
Quote:
Originally Posted by karleone View Post
Do not listen to people telling you polish it.


I always ask my watch not to be polished during service and made it written. Why? Because my watches are either unpolished or repolished but very well done so I don’t want to take the risks Rolex messing up with polish. Whatever people who are fan of polishing says a repolished watch would never look as good as a factory unpolished Rolex. Especially on 4/5 digits Sub/SD/GMT/Explo 2 where the case have bevels/ chamfers most of watches after a repolish lose these bevels/ chamfers that were originally there when the watch left the factory. It’s very common to see as well rounded lugs, lug holes surface not sharp, rounded crown guards, lug holes too close from bevel/ chamfer if still there etc. An additional problem is lugs not being V brushed as it supposed to be on 4/5 digits or with a grain different from Rolex factory finish. People saying a Rolex will come back as new after RSC are just not enough knowledgeable. On a 4/5 digits best case your watch has been repolished by an expert like Rolliworks or LAWW or someone very qualified at RSC and it will look decent / great (but not 100% orignal factory finish). Worst case your watch has been polished not by an expert (and it happens a lot even by Rolex RSC) and your watch has no more scratches so form a non expert looks new but someone who know about polish / repolish will be able to say watch has been repolished and it won’t look as good / not as sharp as initially
I agree with this guy. I bought a couple rolex early in my collecting journey and didn't fully know what to look for in terms of case condition. A couple of my watches have a soft case and now that I know the difference, I get more enjoyment out of my unpolished or nicely polished watches. To me, it's always safest to just leave it alone.

BTW, you mentioned you saw a newer rolex model and it popped more than yours. It may be because the newer models have a high shine finish on the top of the lugs, while your watch has a matte finish and they are meant to be different. I prefer the matte/brushed lugs anyway.
pk552502 is offline   Reply With Quote
Old 28 March 2024, 10:52 PM   #22
padi56
"TRF" Life Patron
 
padi56's Avatar
 
Join Date: Jun 2005
Real Name: Peter
Location: Llanfairpwllgwyng
Watch: ing you.
Posts: 53,064
Quote:
Originally Posted by karleone View Post
Do not listen to people telling you polish it.


I always ask my watch not to be polished during service and made it written. Why? Because my watches are either unpolished or repolished but very well done so I don’t want to take the risks Rolex messing up with polish. Whatever people who are fan of polishing says a repolished watch would never look as good as a factory unpolished Rolex. Especially on 4/5 digits Sub/SD/GMT/Explo 2 where the case have bevels/ chamfers most of watches after a repolish lose these bevels/ chamfers that were originally there when the watch left the factory. It’s very common to see as well rounded lugs, lug holes surface not sharp, rounded crown guards, lug holes too close from bevel/ chamfer if still there etc. An additional problem is lugs not being V brushed as it supposed to be on 4/5 digits or with a grain different from Rolex factory finish. People saying a Rolex will come back as new after RSC are just not enough knowledgeable. On a 4/5 digits best case your watch has been repolished by an expert like Rolliworks or LAWW or someone very qualified at RSC and it will look decent / great (but not 100% orignal factory finish). Worst case your watch has been polished not by an expert (and it happens a lot even by Rolex RSC) and your watch has no more scratches so form a non expert looks new but someone who know about polish / repolish will be able to say watch has been repolished and it won’t look as good / not as sharp as initially
Each to their own but myself being around Rolex watches for well over 50 years and over those years had many watches polished and never ever had a bad polish by any RSC.Expect Rolex service and polish thousands of watches each year and a very very very tiny proportion have any real big problems.My own working 16600 SD tool watch from the around 1999.It had a very hard life seen more use than today's pampered watches will see in 10 life times.Yet it has been serviced and polished by now 4 RSC world wide 25 years old still looking good today.

__________________

ICom Pro3

All posts are my own opinion and my opinion only.

"The clock of life is wound but once, and no man has the power to tell just when the hands will stop. Now is the only time you actually own the time, Place no faith in time, for the clock may soon be still for ever."
Good Judgement comes from experience,experience comes from Bad Judgement,.Buy quality, cry once; buy cheap, cry again and again.

www.mc0yad.club

Second in command CEO and left handed watch winder
padi56 is offline   Reply With Quote
Old 28 March 2024, 11:57 PM   #23
ChronoHunk
"TRF" Member
 
Join Date: Feb 2023
Location: London
Posts: 8
I wouldn’t polish it. Those dings and scratches are the etchings of memories your father made whilst wearing the watch. Keep those memories with you on your special day. Add to them.

Congrats on the wedding!
ChronoHunk is offline   Reply With Quote
Old 17 September 2024, 04:55 AM   #24
andrewjb88
"TRF" Member
 
andrewjb88's Avatar
 
Join Date: May 2018
Location: United Kingdom
Watch: 16302 Rolex OP
Posts: 767
I didn't touch it in the end, simply just gave it a quick clean with water and soap.

__________________
Rolex Datejust 16203
Omega Seamaster Professional 300m
Tudor BB GMT
Luch one hand
andrewjb88 is offline   Reply With Quote
Old 17 September 2024, 05:22 AM   #25
Apdl
"TRF" Member
 
Apdl's Avatar
 
Join Date: Jun 2012
Location: Lakeville, MN
Watch: 126610LN Finally!
Posts: 418
Quote:
Originally Posted by andrewjb88 View Post
I didn't touch it in the end, simply just gave it a quick clean with water and soap.

Absolute perfection
Apdl is offline   Reply With Quote
Old 17 September 2024, 06:13 AM   #26
Turpentine
"TRF" Member
 
Join Date: Nov 2011
Location: Mississippi
Posts: 265
what's going on with these end-links?
Turpentine is offline   Reply With Quote
Old 17 September 2024, 07:03 AM   #27
majidessa
"TRF" Member
 
Join Date: Apr 2015
Location: .
Posts: 392
I think the watch needs a polish at Rolex service center once service is due as I'm of the opinion that 2 tone and precious metal watches do not look good if not polished while SS models are more of a tool pieces that can do without polish if they are in a good cosmetic condition but either way no point in wearing a scratched up and poor looking watch unless it is a rare peice that is highly collectable which 99% of modern Rolexes aren't.

As for not polishing the watch in order to keep your dad's memory, it is the watch it self what it matters and not the dings and scratches, by maintianing the watch in a good shape you will enjoy wearing it more while staying connected to your father memory.
majidessa is offline   Reply With Quote
Old 17 September 2024, 07:14 AM   #28
Boopie
"TRF" Member
 
Boopie's Avatar
 
Join Date: Aug 2007
Location: Beverly Hills, CA
Watch: Yachtmaster
Posts: 3,952
Quote:
Originally Posted by majidessa View Post
I think the watch needs a polish at Rolex service center once service is due as I'm of the opinion that 2 tone and precious metal watches do not look good if not polished while SS models are more of a tool pieces that can do without polish if they are in a good cosmetic condition but either way no point in wearing a scratched up and poor looking watch unless it is a rare peice that is highly collectable which 99% of modern Rolexes aren't.

As for not polishing the watch in order to keep your dad's memory, it is the watch it self what it matters and not the dings and scratches, by maintianing the watch in a good shape you will enjoy wearing it more while staying connected to your father memory.
Agreed with this.

It is a lovely watch. You honor your father’s memory by wearing it on your wedding day. The dings and scratches are a subjective thing. If you like them, keep them. If you don’t, get the watch professionally polished to look new, and create your own memories with your father’s watch.

Congratulations!
Boopie is offline   Reply With Quote
Old 17 September 2024, 07:37 AM   #29
aboutime
"TRF" Member
 
Join Date: Mar 2024
Location: Australia
Posts: 197
Congratulations to you and your partner on the wonderful day. A lovely datejust that your father owned. I think it looks perfect the way it is but do what suits you. No one else is wearing it.
aboutime is offline   Reply With Quote
Old 17 September 2024, 07:39 AM   #30
Cambo
"TRF" Member
 
Join Date: Dec 2012
Real Name: Cam
Location: North of 49th
Watch: Rolex/Grand Seiko
Posts: 1,934
A beautiful reference and congrats! Personally, I would polish the watch.
Edit…I see I’m late to the game but I still would have it polished.
__________________
16618 126710BLRO 116500 LN (White) 228235 228239
SBGK002
Cambo is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

OCWatches

Wrist Aficionado

My Watch LLC

WatchesOff5th

DavidSW Watches

Takuya Watches


*Banners Of The Month*
This space is provided to horological resources.





Copyright ©2004-2024, The Rolex Forums. All Rights Reserved.

ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Rolex is a registered trademark of ROLEX USA. The Rolex Forums is not affiliated with ROLEX USA in any way.