How to set up a Sub Bracelet for 7.5 wrist

[Super Dave]

Hi,

Could someone help me save some time by telling me how many links to have on each side for a 7 1/4 to 7 1/2 sized wrist.

Thanks for your help.
Dave

[Tools]

That's exactly my wrist size 7.5"...

All my Subs have 5 links on the 6 o'clock side...(no extra links); all the other screw links are on the 12 o'clock side.. The micro clasp pin is in the second hole from the inside.........

[JJ Irani]

Originally Posted by Super Dave

Hi,

Could someone help me save some time by telling me how many links to have on each side for a 7 1/4 to 7 1/2 sized wrist.

Thanks for your help.
Dave

I too have the same wrist and this is the exact LINK arrangement an SS Sub-date should come out of the box - brand new.

9 links + 1 flat link (marked "S") on the 12 side.

4½ link on the 6 side.

[Super Dave]

Thank you for the help and photo.

Aloha,
DF

[Johny]

good info. had one link off at the ad and assumed it was off the short side (6 oclock) but after looking it is off the long side (12 oclock) which now only has 8 plus 1 flat one. johny

[vsighi]

Hi guys, I have a 7" wrist and my DEEP SEA has by removing one link...4 @ 6 o'clock side and 6 @ 12 o'clock side...is this normal.? My question is where you remove one braceled link if you have too from 6 or 12 o'clock side...!?!

[skyedog]

I just know it's mostly come in 13links
just put in on my wrist, center it and then remove the extra...... never think of counting up / down left right.....

[vsighi]

Originally Posted by skyedog

I just know it's mostly come in 13links
just put in on my wrist, center it and then remove the extra...... never think of counting up / down left right.....

...the assistant manager at the jewelery place where I got my baby DeepSea he insisted that the best way to adjust your bracelet is by removing one link @ 6 o'clock...this way your watch will be pulled more towards you...he insisted

[Tools]

Originally Posted by vsighi

Hi guys, I have a 7" wrist and my DEEP SEA has by removing one link...4 @ 6 o'clock side and 6 @ 12 o'clock side...is this normal.? My question is where you remove one braceled link if you have too from 6 or 12 o'clock side...!?!

Usually you would remove a link from the 6 o'clock side first and check fit, then go the 12 o'clock side..

This post is over a year old, and so doesn't address the new bracelets.. All of the new-generations bracelets have an additional removable link on both side... They use an SEL + 3 link permanent half, whereas the older bracelets used a SEL + 4 permanent link half.. (this keeps users from needing to remove a permanent link off the 6 side, which used to be very common..)

Adjustment is still the same... remove all 6 o'clock links first...