ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

improviz · 18 July 2013, 07:37 AM

Was out earlier today and after looking at my watch several times, I noticed that time seemed to be standing still....which is because the watch was standing still, it had stopped!

I would it 40 times before leaving this AM, but tried again, nothing. She is dead, off to RSC she goes, grr...fortunately it is still under warranty and I live close to an RSC, so no postage expenses or worries.

Spartan · 18 July 2013, 07:41 AM

Same thing happened to my wifes T serial YM! Its at the RSC in Toronto as well....Since June the 4th

kilyung · 18 July 2013, 07:41 AM

At least you have other fine pieces to wear.

Thebiglagu · 18 July 2013, 07:46 AM

I'm so sorry for you're loss.

samsmart · 18 July 2013, 08:08 AM

Quote:

Originally Posted by improviz

Was out earlier today and after looking at my watch several times, I noticed that time seemed to be standing still....which is because the watch was standing still, it had stopped!

I would it 40 times before leaving this AM, but tried again, nothing. She is dead, off to RSC she goes, grr...fortunately it is still under warranty and I live close to an RSC, so no postage expenses or worries.

Same thing recently happened to mine, ended up being the main spring. Just got her back.

Sent from my GT-P5113 using Tapatalk 2

cop414 · 18 July 2013, 08:11 AM

Wow, that stinks, keep us posted.

improviz · 18 July 2013, 08:12 AM

Quote:

Originally Posted by kilyung

At least you have other fine pieces to wear.

It definitely could be worse! Otoh it could definitely be better: I could have your collection instead!

improviz · 18 July 2013, 08:14 AM

Quote:

Originally Posted by samsmart

Same thing recently happened to mine, ended up being the main spring. Just got her back.

Yeah, I'm thinking that's what happened here as well, this thing won't even hint at a tick, deader than a doornail....

Rashid.bk · 18 July 2013, 09:09 AM

lots of these popping up lately, what gives....
Dr Qadri's GMT2c with a similar mvmnt also died today.
these are new watches, rolex needs to get there qc in order, these things aint getting any cheaper.
plz give us an update when it's resolved.

mjclark32 · 18 July 2013, 09:14 AM

Sorry to hear, at least it's under warranty and will be returned good as new

rodrob59 · 18 July 2013, 09:19 AM

My Explorer has died twice since I purchased it in early June, 2011. Repaired both times under warranty but very annoying. You should have in back in 3-4 weeks. Good thing, at least, the folks at Dallas RSC are very nice and great to work with. But there'll be no word on what was wrong.

Good luck. And you're other watches will enjoy the extra attention.

thisisyourlife · 18 July 2013, 11:03 AM

For a watch repair under warranty, is the warranty period extended by the service duration?

improviz · 18 July 2013, 11:29 AM

Just had a look at the warranty paper, it's a good thing it failed now: there are only a few months left on the warranty!

Thatguy · 18 July 2013, 11:32 AM

Quote:

Originally Posted by thisisyourlife

For a watch repair under warranty, is the warranty period extended by the service duration?

I know of no warranty that does that.

Chainring · 18 July 2013, 11:43 AM

Sorry to hear that. Maybe you should have wound it 40 times instead of "would it" 40 times.

Did you try banging it on the table a few times? I tried that method with my Harmony One remote when it stopped responding. Turns out that method is not recommended with electronics.

It probably wouldn't work with expensive watches either. I hope you get her back quickly.

Boopie · 18 July 2013, 12:43 PM

My YM suddenly died last year. Because RSC had seen it fairly recently for service, Dallas took care of it. They never told me what the problem was, but it works and it was free to fix (other than the hassle of being without it).

Billywiz · 18 July 2013, 12:49 PM

My imagination or is this happening more than usual...I have been a Rolex owner since 1988 and apart from a street brawl in London over one I have never had a problem with any...ever.

....please do not ask about my Panerai....never again!

improviz · 18 July 2013, 01:26 PM

Quote:

Originally Posted by Chainring

Sorry to hear that. Maybe you should have wound it 40 times instead of "would it" 40 times.

Did you try banging it on the table a few times? I tried that method with my Harmony One remote when it stopped responding. Turns out that method is not recommended with electronics.

It probably wouldn't work with expensive watches either. I hope you get her back quickly.

Ack! Dang small font...

Lol, I can vouch for the fact that Harmony One remotes do not like hard impacts! Very convenient, but not the most robust remotes out there...anyway, thanks!

Hairdude1 · 18 July 2013, 01:28 PM

Sorry to hear, lets us know how it goes

busytimmy · 18 July 2013, 01:29 PM

Hmm... this is crappy to hear. Keep us posted.

ec51 · 18 July 2013, 02:20 PM

Quote:

Originally Posted by Boopie

My YM suddenly died last year. Because RSC had seen it fairly recently for service, Dallas took care of it. They never told me what the problem was, but it works and it was free to fix (other than the hassle of being without it).

A new warranty is given after a full service.

Thatguy · 18 July 2013, 02:59 PM

Quote:

Originally Posted by ec51

A new warranty is given after a full service.

True, but after a warranty service??

TAKUYA · 18 July 2013, 03:08 PM

Sorry to hear that. but fortunately it's still under factory warranty.

watchlist88 · 18 July 2013, 03:27 PM

This is a reminder that buying any new watch which is not cheap by the way ... it is always better to buy with an original warranty, otherwise take the risk of any problems cropping up.

andyboy39 · 18 July 2013, 07:12 PM

Quote:

Originally Posted by samsmart

Same thing recently happened to mine, ended up being the main spring. Just got her back.

Sent from my GT-P5113 using Tapatalk 2

Same thing happened with my Sub Serti dial, Main Spring...hmmm

ec51 · 18 July 2013, 09:39 PM

Quote:

Originally Posted by Thatguy

True, but after a warranty service??

No, after a paid service.

ec51 · 18 July 2013, 09:43 PM

Quote:

Originally Posted by watchlist88

This is a reminder that buying any new watch which is not cheap by the way ... it is always better to buy with an original warranty, otherwise take the risk of any problems cropping up.

The amount saved buying preloved often outweighs a full service. I rather buy preloved, send the watch in and still save money.

padi56 · 18 July 2013, 10:55 PM

Quote:

Originally Posted by ec51

A new warranty is given after a full service.

No its not if any warranty work is done the owner does not pay and the warranty is just that a warranty for that time period its not extended.Now if you pay for a full service then you will get a two year warranty after.

nickng · 18 July 2013, 11:14 PM

Argh..... I hate reading such things happening to our fellow member. Thankfully it is still under warranty.

Sorry to hear about your predicament, improviz.
Hope you will get it back from RSC soon.

improviz · 18 July 2013, 11:16 PM

Thanks, all! I'll keep you posted...taking in later this week/early next depending on work load!

18 July 2013, 07:37 AM	#1
improviz "TRF" Member Join Date: Jun 2008 Location: Tejas Watch: your step Posts: 2,806	Explorer II died today! Was out earlier today and after looking at my watch several times, I noticed that time seemed to be standing still....which is because the watch was standing still, it had stopped! I would it 40 times before leaving this AM, but tried again, nothing. She is dead, off to RSC she goes, grr...fortunately it is still under warranty and I live close to an RSC, so no postage expenses or worries. __________________ 116520 white; 16613 black; 116710; 16570 polar; 16600. AP 15400; 15703. Blancpain Fifty Fathoms. Glashutte Sport Evo GMT. Omega Planet Ocean 2907.50.91; Planet Ocean Liquidmetal LE 222.30.42.20.01.001; Seamaster 2255.80.00. Breitling Crosswind, white. Panerai PAM 005. VC Overseas Chrono, black.

18 July 2013, 07:41 AM	#2
Spartan "TRF" Member Join Date: Nov 2010 Location: Canada Watch: ALL of them Posts: 450	Same thing happened to my wifes T serial YM! Its at the RSC in Toronto as well....Since June the 4th __________________ ROLEX1675:126660:226570BL:116613LN:114060 Pam00279 : Pam00270 : OMEGA3861 : Navitimer A23322 :

18 July 2013, 08:11 AM	#6
cop414 TRF Moderator & 2024 SubLV41 Patron Join Date: Apr 2012 Real Name: Tim Location: Pennsylvania Watch: 14060M Posts: 72,270	Wow, that stinks, keep us posted. __________________ Rolex Submariner 14060M Omega Seamaster 2254.50 DOXA Professional 1200T Card carrying member of TRF's Global Association of Retro-Grouch-Curmudgeons TRF's "After Dark" Bar & NightClub Patron P Club Member #17 2 FA ENABLED

18 July 2013, 09:14 AM	#10
mjclark32 "TRF" Member Join Date: Mar 2010 Real Name: MJC Location: PHL USA Watch: IWC, Rolex, AP Posts: 29,232	Sorry to hear, at least it's under warranty and will be returned good as new __________________

18 July 2013, 09:19 AM	#11
rodrob59 "TRF" Member Join Date: Jun 2011 Real Name: Rod Location: Atlanta, GA Watch: YG DD 18238 Posts: 1,540	My Explorer has died twice since I purchased it in early June, 2011. Repaired both times under warranty but very annoying. You should have in back in 3-4 weeks. Good thing, at least, the folks at Dallas RSC are very nice and great to work with. But there'll be no word on what was wrong. Good luck. And you're other watches will enjoy the extra attention. __________________ I ask you to judge me by the enemies I have made. -Franklin D. Roosevelt

18 July 2013, 07:41 AM	#3
kilyung 2024 SubLV41 Pledge Member Join Date: Jul 2009 Location: Cave Watch: Sundial Posts: 33,940	At least you have other fine pieces to wear.

18 July 2013, 07:46 AM	#4
Thebiglagu "TRF" Member Join Date: Sep 2012 Real Name: Tommy Location: New jersey Watch: Rolex 16610 Posts: 457	I'm so sorry for you're loss.

18 July 2013, 09:09 AM	#9
Rashid.bk "TRF" Member Join Date: Jan 2009 Location: Dallas Watch: 12800ft = 3900m Posts: 11,173	lots of these popping up lately, what gives.... Dr Qadri's GMT2c with a similar mvmnt also died today. these are new watches, rolex needs to get there qc in order, these things aint getting any cheaper. plz give us an update when it's resolved.

18 July 2013, 11:03 AM	#12
thisisyourlife "TRF" Member Join Date: Jan 2013 Location: USA Posts: 4	For a watch repair under warranty, is the warranty period extended by the service duration?

18 July 2013, 11:29 AM	#13
improviz "TRF" Member Join Date: Jun 2008 Location: Tejas Watch: your step Posts: 2,806	Just had a look at the warranty paper, it's a good thing it failed now: there are only a few months left on the warranty! __________________ 116520 white; 16613 black; 116710; 16570 polar; 16600. AP 15400; 15703. Blancpain Fifty Fathoms. Glashutte Sport Evo GMT. Omega Planet Ocean 2907.50.91; Planet Ocean Liquidmetal LE 222.30.42.20.01.001; Seamaster 2255.80.00. Breitling Crosswind, white. Panerai PAM 005. VC Overseas Chrono, black.

18 July 2013, 11:43 AM	#15
Chainring "TRF" Member Join Date: Jun 2012 Real Name: Steve Location: Grand Junction CO Watch: A few, not enough. Posts: 1,725	Sorry to hear that. Maybe you should have wound it 40 times instead of "would it" 40 times. Did you try banging it on the table a few times? I tried that method with my Harmony One remote when it stopped responding. Turns out that method is not recommended with electronics. It probably wouldn't work with expensive watches either. I hope you get her back quickly.

18 July 2013, 12:43 PM	#16
Boopie "TRF" Member Join Date: Aug 2007 Location: Beverly Hills, CA Watch: Yachtmaster Posts: 3,952	My YM suddenly died last year. Because RSC had seen it fairly recently for service, Dallas took care of it. They never told me what the problem was, but it works and it was free to fix (other than the hassle of being without it).

18 July 2013, 12:49 PM	#17
Billywiz Banned Join Date: May 2013 Real Name: John Location: Florida Watch: YG President Posts: 2,090	My imagination or is this happening more than usual...I have been a Rolex owner since 1988 and apart from a street brawl in London over one I have never had a problem with any...ever. ....please do not ask about my Panerai....never again!

18 July 2013, 01:28 PM	#19
Hairdude1 "TRF" Member Join Date: Apr 2012 Real Name: Alex Location: Chicago Watch: AP,PP, Rolex Posts: 37,156	Sorry to hear, lets us know how it goes

18 July 2013, 01:29 PM	#20
busytimmy "TRF" Member Join Date: Dec 2012 Location: Sydney, Australia Watch: ing the detectives Posts: 3,745	Hmm... this is crappy to hear. Keep us posted.

18 July 2013, 03:08 PM	#23
TAKUYA ⭐⭐⭐⭐2024 SubLV41 sponsor & Boutique Seller Join Date: Apr 2011 Real Name: Thanh Takuya Location: Dont mess w Texas Watch: AP/Rolex/PP Posts: 53,034	Sorry to hear that. but fortunately it's still under factory warranty. __________________ 2 Factor Authentication Security Active Instagram @takuyawatches

18 July 2013, 03:27 PM	#24
watchlist88 "TRF" Member Join Date: Jul 2013 Real Name: Andrew Location: South Watch: Rolex & Omega Posts: 9	This is a reminder that buying any new watch which is not cheap by the way ... it is always better to buy with an original warranty, otherwise take the risk of any problems cropping up.

18 July 2013, 11:14 PM	#29
nickng "TRF" Member Join Date: Jul 2009 Real Name: NickN Location: Singapore Watch: Rolex Posts: 524	Argh..... I hate reading such things happening to our fellow member. Thankfully it is still under warranty. Sorry to hear about your predicament, improviz. Hope you will get it back from RSC soon. __________________ NickN

18 July 2013, 11:16 PM	#30
improviz "TRF" Member Join Date: Jun 2008 Location: Tejas Watch: your step Posts: 2,806	Thanks, all! I'll keep you posted...taking in later this week/early next depending on work load! __________________ 116520 white; 16613 black; 116710; 16570 polar; 16600. AP 15400; 15703. Blancpain Fifty Fathoms. Glashutte Sport Evo GMT. Omega Planet Ocean 2907.50.91; Planet Ocean Liquidmetal LE 222.30.42.20.01.001; Seamaster 2255.80.00. Breitling Crosswind, white. Panerai PAM 005. VC Overseas Chrono, black.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode