ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

yakmeister · 17 September 2014, 01:42 AM

Quote:

Originally Posted by HogwldFLTR

Is it a ceramic or aluminum bezel? If it is aluminum it is easily removed and cleared of whatever is impeding the movement. The ceramic would likely need to be brought to a jeweler.

Is the process for removing a ceramic different, or is it just more fragile and the potential for breakage is greater?

Blingtone · 17 September 2014, 03:35 AM

Totally agree with swils8610 : Warm soapy water and a tooth brush, then rinse under cold water, rotating the bezel while running water over it - works every time for me :)

Jocke · 17 September 2014, 03:47 AM

I try WD40 on my Sea Dweller and it cost me a bezel.

cornerstore · 17 September 2014, 04:32 AM

Goo Gone http://googone.com/FAQs.aspx

datejusting · 17 September 2014, 04:43 AM

Quote:

Originally Posted by swils8610

Warm soapy water and a tooth brush will take care of it. I would also rotate the bezel while running water over it.

Try this! You may want to leave it soak in the warm water for five or ten minutes.

jhcam8 · 17 September 2014, 04:52 AM

Silicon spray probably wouldn't hurt it, but cleaning is preferred.

17 September 2014, 03:47 AM	#33
Jocke 2024 SubLV41 Pledge Member Join Date: Apr 2006 Real Name: Jocke Location: Sweden Watch: A dozen of Rolex's Posts: 22,541	I try WD40 on my Sea Dweller and it cost me a bezel. __________________ This message is written in perfect swenglish. What is best a custom Rolex or a Rolex that is stuck in custom? Buy a professional camera and you´re a professional photographer, buy a flute and you own a flute.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

17 September 2014, 03:35 AM	#32
Blingtone "TRF" Member Join Date: Apr 2010 Real Name: Tony Location: Loughton UK Watch: 16610LV no Rehault Posts: 369	Totally agree with swils8610 : Warm soapy water and a tooth brush, then rinse under cold water, rotating the bezel while running water over it - works every time for me :)

17 September 2014, 04:32 AM	#34
cornerstore "TRF" Member Join Date: Sep 2009 Location: Canada Posts: 4,010	Goo Gone http://googone.com/FAQs.aspx

17 September 2014, 04:52 AM	#36
jhcam8 "TRF" Member Join Date: May 2011 Real Name: Jim Location: SE MI, USA Watch: Sub C Posts: 2,068	Silicon spray probably wouldn't hurt it, but cleaning is preferred.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)