ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

laminads · 8 January 2016, 06:34 PM

I recently brought my 16710 to the beverly hills RSC to get a fresh pepsi insert installed along with a full service. I was surprised to find out later that they had glued (i think thats what it is) the new insert in place. I couldnt pop it out of the bezel like I could with the previous insert. I even tried hitting it with a hot blowdryer for a bit but the insert still won't budge.

Does anybody else have any experience with this? Any suggestions for how to pop it out without scratching/warping something?

padi56 · 8 January 2016, 06:51 PM

Quote:

Originally Posted by laminads

I recently brought my 16710 to the beverly hills RSC to get a fresh pepsi insert installed along with a full service. I was surprised to find out later that they had glued (i think thats what it is) the new insert in place. I couldnt pop it out of the bezel like I could with the previous insert. I even tried hitting it with a hot blowdryer for a bit but the insert still won't budge.

Does anybody else have any experience with this? Any suggestions for how to pop it out without scratching/warping something?

First cannot understand why you would want to remove a nearly installed insert,and would seriously doubt if any RSC would use glue to fit any type of insert.

laminads · 8 January 2016, 07:25 PM

I cant be the only one that's ever purchased a new insert then wanted to go back ;)

I may be completely wrong and just need to force it out harder. I wanted to ask you guys because I was also under the impression that Rolex doesnt use any adhesive.

V1Rotate · 8 January 2016, 08:46 PM

Definitely no glue involved. Sometimes, especially new ones are super tight and feels as if it won't come out. just keep working it with both thumbs and you'll eventually find that welcomed "click" sound. As you mentioned they can warp or buckle so there is a possibility you could sacrifice it unfortunately.

Roller07 · 9 January 2016, 01:14 AM

Quote:

Originally Posted by laminads

I recently brought my 16710 to the beverly hills RSC to get a fresh pepsi insert installed along with a full service. I was surprised to find out later that they had glued (i think thats what it is) the new insert in place.

What did they use? Shoe glue?

I doubt they glued it in. Take it back to them or a competent watchmaker to take the insert out of the bezel.

TimeToGo · 9 January 2016, 01:27 AM

The watchmaker I use places a couple of spots on the bezel.. nothing wrong with that..

WS9D · 9 January 2016, 01:39 AM

I bought a brand new OEM coke and pepsi insert from the Authorized RSC in SF a few months back. Both were very hard to get in and out initially. After a few insert changes depending on my mood, they go in easier now. The coke can still be a pain in the.... at times.

Etschell · 9 January 2016, 02:01 AM

Quote:

Originally Posted by padi56

First cannot understand why you would want to remove a nearly installed insert,and would seriously doubt if any RSC would use glue to fit any type of insert.

people do it all the time on 5 series sports models. they like that ability over a 6 series.

eltonbalch · 9 January 2016, 02:09 AM

If the RSC installed it, I'm 99% confident no glue was used but I'd call the service center directly rather than ask here if you are unsure.

padi56 · 9 January 2016, 02:34 AM

Quote:

Originally Posted by Etschell

people do it all the time on 5 series sports models. they like that ability over a 6 series.

While that is quite true and quite easy to do have done myself many many times over the many years.My point is why the original poster wanted to remove newly replaced insert done by the RSC now that seems very odd to me.

Etschell · 9 January 2016, 03:53 AM

Quote:

Originally Posted by padi56

While that is quite true and quite easy to do have done myself many many times over the many years.My point is why the original poster wanted to remove newly replaced insert done by the RSC now that seems very odd to me.

i dont disagree. must have replaced it new and he has something vintage or faded he wants to swap in and didnt want them to replace?

HogwldFLTR · 9 January 2016, 03:59 AM

"Why" seems like a strange focus; "how" answer seems clear now. I have an insert on my 16700 that is really tight so I won't mess with it for fear of damaging it.

laminads · 9 January 2016, 05:59 AM

Thanks for the information guys! If I ever REALLY want to swap inserts again ill have RSC or a local watchmaker get it out so nothing gets damaged.

Etschell you hit it right on the head. The watch came with a faded pink/blue insert as purchased from a trusted dealer here. I purchased a new bezel insert to try it out then decided after a few weeks that I prefer the faded look...i'm not sure whats so suspicious.

padi56 · 9 January 2016, 06:40 PM

Quote:

Originally Posted by laminads

I recently brought my 16710 to the beverly hills RSC to get a fresh pepsi insert installed along with a full service. I was surprised to find out later that they had glued (i think thats what it is) the new insert in place. I couldnt pop it out of the bezel like I could with the previous insert. I even tried hitting it with a hot blowdryer for a bit but the insert still won't budge.

Does anybody else have any experience with this? Any suggestions for how to pop it out without scratching/warping something?

Quote:

Originally Posted by laminads

Thanks for the information guys! If I ever REALLY want to swap inserts again ill have RSC or a local watchmaker get it out so nothing gets damaged.

Etschell you hit it right on the head. The watch came with a faded pink/blue insert as purchased from a trusted dealer here. I purchased a new bezel insert to try it out then decided after a few weeks that I prefer the faded look...i'm not sure whats so suspicious.

Well you did not state that information in your original post.?

bondtoys · 9 January 2016, 06:45 PM

The insert from my 16610LV was definitly glued with some kind of hot-glue.
Wouldn't be surprised if some RSC would do that as standard procedure when watches are sent without inserts just to get another one.

KarlS · 9 January 2016, 07:34 PM

Quote:

Originally Posted by padi56

Well you did not state that information in your original post.?

I think the guy was originally seeking advice on a problem he has not seeking an opinion of why he does something??

Evad3 · 9 January 2016, 07:59 PM

Quote:

Originally Posted by padi56

Well you did not state that information in your original post.?

Sorry, but why is this information relevant at all to the thread? Maybe I am missing something

KarlS · 9 January 2016, 08:46 PM

Quote:

Originally Posted by Evad3

Sorry, but why is this information relevant at all to the thread? Maybe I am missing something

Zilch!!

Ckci · 11 January 2016, 03:57 AM

Quote:

Originally Posted by Evad3

Sorry, but why is this information relevant at all to the thread? Maybe I am missing something

Agee. I too often tell my life story. The OP kept it sweet and to the point. That can be a good thing.

8 January 2016, 06:34 PM	#1
laminads "TRF" Member Join Date: May 2015 Location: NY Posts: 17	RSC glueing bezel inserts? I recently brought my 16710 to the beverly hills RSC to get a fresh pepsi insert installed along with a full service. I was surprised to find out later that they had glued (i think thats what it is) the new insert in place. I couldnt pop it out of the bezel like I could with the previous insert. I even tried hitting it with a hot blowdryer for a bit but the insert still won't budge. Does anybody else have any experience with this? Any suggestions for how to pop it out without scratching/warping something?

8 January 2016, 07:25 PM	#3
laminads "TRF" Member Join Date: May 2015 Location: NY Posts: 17	I cant be the only one that's ever purchased a new insert then wanted to go back ;) I may be completely wrong and just need to force it out harder. I wanted to ask you guys because I was also under the impression that Rolex doesnt use any adhesive. Attached Images

9 January 2016, 03:59 AM	#12
HogwldFLTR 2024 ROLEX SUBMARINER 41 Pledge Member Join Date: Aug 2012 Real Name: Lee Location: 42.48.45N70.48.48 Watch: Too many to list! Posts: 33,697	"Why" seems like a strange focus; "how" answer seems clear now. I have an insert on my 16700 that is really tight so I won't mess with it for fear of damaging it. __________________ Troglodyte in residence! https://www.rolexforums.com/showthread.php?t=808599

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

8 January 2016, 08:46 PM	#4
V1Rotate "TRF" Member Join Date: Dec 2013 Location: @Boston Watch: 16660 16613 16710 Posts: 278	Definitely no glue involved. Sometimes, especially new ones are super tight and feels as if it won't come out. just keep working it with both thumbs and you'll eventually find that welcomed "click" sound. As you mentioned they can warp or buckle so there is a possibility you could sacrifice it unfortunately.

9 January 2016, 01:27 AM	#6
TimeToGo 2024 SubLV41 Pledge Member Join Date: Sep 2008 Location: North Florida Posts: 16,736	The watchmaker I use places a couple of spots on the bezel.. nothing wrong with that..

9 January 2016, 01:39 AM	#7
WS9D "TRF" Member Join Date: Apr 2015 Real Name: Steve Location: Shasta Watch: es..More Watches! Posts: 2,415	I bought a brand new OEM coke and pepsi insert from the Authorized RSC in SF a few months back. Both were very hard to get in and out initially. After a few insert changes depending on my mood, they go in easier now. The coke can still be a pain in the.... at times.

9 January 2016, 02:09 AM	#9
eltonbalch "TRF" Member Join Date: Oct 2006 Location: Cambridge, NY Posts: 1,089	If the RSC installed it, I'm 99% confident no glue was used but I'd call the service center directly rather than ask here if you are unsure.

9 January 2016, 05:59 AM	#13
laminads "TRF" Member Join Date: May 2015 Location: NY Posts: 17	Thanks for the information guys! If I ever REALLY want to swap inserts again ill have RSC or a local watchmaker get it out so nothing gets damaged. Etschell you hit it right on the head. The watch came with a faded pink/blue insert as purchased from a trusted dealer here. I purchased a new bezel insert to try it out then decided after a few weeks that I prefer the faded look...i'm not sure whats so suspicious.

9 January 2016, 06:45 PM	#15
bondtoys "TRF" Member Join Date: Mar 2009 Location: World Watch: 16750 Posts: 2,733	The insert from my 16610LV was definitly glued with some kind of hot-glue. Wouldn't be surprised if some RSC would do that as standard procedure when watches are sent without inserts just to get another one.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)