ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX
6 April 2016, 04:29 PM | #31 |
Banned
Join Date: Mar 2014
Location: UK
Posts: 3,990
|
Hmm….HG is just a retailer – the watch should’ve been sent to http://www.masterwatchmaking.com.au/ – who are credited with being AP’s SC in Australia, and are literally just down the road from them.
I find it odd that an accredited/trained SC was unable to sort your watch out and resorted to informing the AD that it might be better off going to Marina Bay Sands in Singapore, although that pin on the map is different from Australia’s, which may signify something. A slight further thought on the design of the pusher connection – which is purely conjecture – but there’s a chance the threads visible have been stripped at some point (assuming they weren’t at the time of assembly). That may explain the looseness experienced and why the bolt managed to come undone and allow the spring tension to eject the ceramic pusher and surrounding RG piece. If so, then it suggests someone being a bit heavy-handed when re-assembling – assuming the factory uses adjustable torque screwdrivers – which could mean a whole new mid-case is required. That’d be the quickest remedy, but they may just spend the time needed to remove the retainer and fit a new one. I’m slightly puzzled as to why you’ve a bill for $500, when it was sent in whilst still within warranty, especially since it was then subsequently shipped off to Singapore for a part/parts to be replaced? |
6 April 2016, 05:34 PM | #32 |
"TRF" Member
Join Date: Jan 2014
Location: Australia
Watch: watch what?
Posts: 260
|
PJ S - You are absolutely spot on. The Hour Glass is the only AP retailer here in Melbourne. I did not buy the watch off them but went in with my issue. They said everything AP they send to Master Watch Making in Sydney. I only had 2 weeks of warranty left and they said they have to charge me AUD$500 to ship it to Master Watch Makers with armed guards.
I cannot answer why MWM Sydney nor Singapore did not fix the issue but all I can do is prove it with the paperwork of the warranty and a video of my chrono function still not being up to scratch after the watch being off my wrist form early June to the 25th November. |
6 April 2016, 05:39 PM | #33 |
"TRF" Member
Join Date: Jan 2014
Location: Australia
Watch: watch what?
Posts: 260
|
PJ S - I have submitted the form direct to AP you linked to me explaining my two after sales issues within warranty. Also asked for their guidance as to the next step to take.
|
6 April 2016, 06:04 PM | #34 |
"TRF" Member
Join Date: Jul 2014
Location: Singapore
Watch: 44 SS 44 RG.
Posts: 117
|
David. Sad to hear that. Hope you have your watch back soon in good health
|
6 April 2016, 06:37 PM | #35 |
Banned
Join Date: Mar 2014
Location: UK
Posts: 3,990
|
|
7 April 2016, 09:27 AM | #36 |
"TRF" Member
Join Date: Jun 2015
Real Name: Everett
Location: GTA, Canada
Watch: Audemars Piguet 15
Posts: 789
|
Thanks, Everett AP 15710 Diver Sent from my iPhone |
7 April 2016, 09:29 AM | #37 |
"TRF" Member
Join Date: Jun 2015
Real Name: Everett
Location: GTA, Canada
Watch: Audemars Piguet 15
Posts: 789
|
I too sent s pm but I think your in good hands now. So sorry for your issues. I had five different Panerai's over the years. Two of them the 311 and I had to send both in multiple times for movement issues. It was do frustrating! One of the last problems was my monochrono pusher fell off. I was lucky enough to find it and it was fixed under warranty. I'm purchasing another Panerai soon. It'll be a 351. I've owned one before and it was a tank. A nice uncomplicated movement!
Thanks, Everett AP 15710 Diver Sent from my iPhone |
7 April 2016, 10:00 AM | #38 |
"TRF" Member
Join Date: Jan 2014
Location: Australia
Watch: watch what?
Posts: 260
|
Good to know a button pop off and a movement issue were both fixed.
|
7 April 2016, 11:25 AM | #39 |
"TRF" Member
Join Date: Jun 2015
Real Name: Everett
Location: GTA, Canada
Watch: Audemars Piguet 15
Posts: 789
|
Frustrating but yes, eventually fixed.
Thanks, Everett AP 15710 Diver Sent from my iPhone |
9 April 2016, 12:32 PM | #40 |
"TRF" Member
Join Date: Aug 2011
Real Name: Martin
Location: NY And FLA
Watch: AP ROO Blue Scuba
Posts: 2,695
|
Honestly at first glance, it just didnt look like AP finishing or quality, the gold looked yellowing not rose and kind of looked like a replica. I understand the photos werent great, lighting and angles play a huge role
Everything looks legit however was def taken apart, it doesnt look assembled to the same standard as when it comes from the factory I'm going to forward this link to Xavier CEO NA AP and see what he recommends ok? Will let you know what I hear back and hopefull get a remedy for you Martin |
9 April 2016, 10:16 PM | #41 |
Banned
Join Date: Mar 2014
Location: UK
Posts: 3,990
|
Did you skip reading post #35?
|
9 April 2016, 11:35 PM | #42 |
2024 SubLV41 Pledge Member
Join Date: Aug 2014
Location: Cleveland
Posts: 2,172
|
If you have it documented that this complaint wasn't addressed before then i can't imagine they wouldn't fix it. A for the previous poster i don't know how you can fault ap for a 3rd party botching your ap
|
10 April 2016, 07:15 AM | #43 |
"TRF" Member
Join Date: Aug 2011
Real Name: Martin
Location: NY And FLA
Watch: AP ROO Blue Scuba
Posts: 2,695
|
|
10 April 2016, 10:35 AM | #44 |
Banned
Join Date: Mar 2014
Location: UK
Posts: 3,990
|
Post 35, not 28!
Its subtlety is due to the info provided being for private use, not public consumption. |
10 April 2016, 10:14 PM | #45 |
"TRF" Member
Join Date: Jan 2014
Location: Australia
Watch: watch what?
Posts: 260
|
Martin - not a problem. your help would be appreciated. No offence at all taken about the photos. I am more than happy to take photos of my username and watch, along with the days news paper if it helps with authenticity.
obviously I cannot provide viable evidence the watch was not sent to a 3rd party between November and present, however commonsence should lay fact I would not bother with a watch that tis under warranty. Im sure the serial number I've photo'd within any world wide service department would reflect its movements. |
21 April 2016, 05:01 PM | #46 |
"TRF" Member
Join Date: Jan 2014
Location: Australia
Watch: watch what?
Posts: 260
|
Just to keep you all updated in case this thread may help others in the future.
PJ S - As mentioned I have submitted the form direct to AP you linked to me explaining my two after sales issues within warranty. To this day I have not heard anything back (maybe my email was to long to submit via the submission form to give them the benefit of doubt). I am now currently exploring other options who are sorry to hear of my misfortunes and are more than happy to help out. |
21 April 2016, 07:59 PM | #47 | |
"TRF" Member
Join Date: Aug 2015
Location: Singapore
Posts: 89
|
Quote:
|
|
21 April 2016, 09:48 PM | #48 |
"TRF" Member
Join Date: Jan 2014
Location: Australia
Watch: watch what?
Posts: 260
|
IS250C - Oh wow what was the total duration of your enquiry? I think im at approximately 2 weeks.
|
21 April 2016, 10:00 PM | #49 |
"TRF" Member
Join Date: Jul 2011
Real Name: Serg
Location: US of A
Watch: AP
Posts: 7,437
|
Why don't you try calling AP in Clearwater US, and see if they can point you in the right direction? Talk to Lindsay or anybody there. I am sure they will help in whichever way they can.
__________________
How can you have any pudding if you don't eat yer meat???? |
21 April 2016, 10:09 PM | #50 |
"TRF" Member
Join Date: Aug 2015
Location: Singapore
Posts: 89
|
|
21 April 2016, 11:46 PM | #51 | |
Banned
Join Date: Mar 2014
Location: UK
Posts: 3,990
|
Quote:
Seems like the onilne comms team (person?) are swamped, hence the delay in sorting through all the enquiries. Good to hear Al is on the case and bringing it to the attention of the relevant party for your region, just like he said he would when I spoke with him. |
|
22 April 2016, 10:46 AM | #52 |
"TRF" Member
Join Date: Jan 2014
Location: Australia
Watch: watch what?
Posts: 260
|
IS250C - I wonder how that would work if over that 2 month wait your watch dropped out of warranty?
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
*Banners
Of The Month*
This space is provided to horological resources.