ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

Bucky · 2 November 2016, 01:36 AM

Any ideas what size screwdriver you need for the links on the datejust41 jubilee bracelet?

tifosi · 2 November 2016, 01:49 AM

Should be 1.6mm.

watchwatcher · 2 November 2016, 01:58 AM

^^Yep.^^

Edit: I just noticed you asked about jubilee. I'm going to say I don't know in that case. Sorry.

japenney · 2 November 2016, 01:59 AM

http://www.ofrei.com/page1701.html#34354

Juantxo · 2 November 2016, 02:05 AM

There are lots of long threads about the subject matter. The one in the attached picture is second best to the Rolex Ref. 2100.

Bucky · 2 November 2016, 03:06 AM

1.6mm is for oyster. I called Rolex service centre and they said they couldn't tell me and advised me to bring the watch in to get the bracelet sized correctly. I have a feeling it is a 1.3mm screwdriver i need.

tifosi · 2 November 2016, 03:11 AM

Sorry for the huge pic!

mtgjr · 2 November 2016, 04:03 AM

Talk about a lot of misinformation! At least three people telling you to buy 1.6mm (or 1.7) for Jubilee bracelet.

Unfortunately, I don't know the correct answer, but I'm pretty sure it's not 1.6/1.7.

By the way, the correct size for Oyster is 1.7 and Juantxo is right, the 1.7 mm driver pictured above is the next best thing to the Rolex 2100, in my experience. I just picked one up and it fits tons better than the 1.6 mm Horotec I had been using. Highly recommended.

Juantxo · 2 November 2016, 04:10 AM

Quote:

Originally Posted by mtgjr

Talk about a lot of misinformation! At least three people telling you to buy 1.6mm (or 1.7) for Jubilee bracelet.

Unfortunately, I don't know the correct answer, but I'm pretty sure it's not 1.6/1.7.

By the way, the correct size for Oyster is 1.7 and Juantxo is right, the 1.7 mm driver pictured above is the next best thing to the Rolex 2100, in my experience. I just picked one up and it fits tons better than the 1.6 mm Horotec I had been using.

tifosi · 2 November 2016, 04:50 AM

As soon as I see "screwdriver size" my first instinct is 1.6mm haha! Sorry, OP.

If your bracelet is not on the list I posted, then I can't help.

tifosi · 2 November 2016, 05:18 AM

Come to think of it....what screwdriver gets used on the 1.3mm screws. I only see 1.2 and 1.4 on offer from Horotec and Bergeon.

fania123 · 2 November 2016, 06:27 AM

Not sure of the size but be sure it's a slotted screw driver and you'll be in business. Paid about $6.00 for this set from lowes and have sized 36-44mm Rolex's with no issues .

Uclaman · 4 November 2016, 03:14 PM

Does anyone know?

rollee1 · 4 November 2016, 03:43 PM

62510 uses 110 blade, thinner than ones on 78790 93150/93250.
I learned something new, thanks.

2 November 2016, 01:36 AM	#1
Bucky "TRF" Member Join Date: Jul 2012 Location: UK Posts: 601	Rolex datejust41 screwdriver size Any ideas what size screwdriver you need for the links on the datejust41 jubilee bracelet?

2 November 2016, 01:49 AM	#2
tifosi "TRF" Member Join Date: Feb 2009 Real Name: Russ Location: Southern NJ Posts: 5,760	Should be 1.6mm. __________________ Russ

2 November 2016, 02:05 AM	#5
Juantxo Banned Join Date: May 2016 Location: Utopia Posts: 2,101	There are lots of long threads about the subject matter. The one in the attached picture is second best to the Rolex Ref. 2100. Attached Images

2 November 2016, 03:11 AM	#7
tifosi "TRF" Member Join Date: Feb 2009 Real Name: Russ Location: Southern NJ Posts: 5,760	Sorry for the huge pic! __________________ Russ

2 November 2016, 04:50 AM	#10
tifosi "TRF" Member Join Date: Feb 2009 Real Name: Russ Location: Southern NJ Posts: 5,760	As soon as I see "screwdriver size" my first instinct is 1.6mm haha! Sorry, OP. If your bracelet is not on the list I posted, then I can't help. __________________ Russ

2 November 2016, 01:58 AM	#3
watchwatcher "TRF" Member Join Date: Jan 2009 Real Name: Larry Location: Kentucky Watch: Yes Posts: 35,047	^^Yep.^^ Edit: I just noticed you asked about jubilee. I'm going to say I don't know in that case. Sorry.

2 November 2016, 01:59 AM	#4
japenney "TRF" Member Join Date: Apr 2013 Real Name: Josh Location: Canada Watch: undecided Posts: 4,777	http://www.ofrei.com/page1701.html#34354

2 November 2016, 03:06 AM	#6
Bucky "TRF" Member Join Date: Jul 2012 Location: UK Posts: 601	1.6mm is for oyster. I called Rolex service centre and they said they couldn't tell me and advised me to bring the watch in to get the bracelet sized correctly. I have a feeling it is a 1.3mm screwdriver i need.

2 November 2016, 04:03 AM	#8
mtgjr Banned Join Date: Dec 2009 Real Name: Mike Location: Tampa, Florida Watch: Pepsi GMT Posts: 2,926	Talk about a lot of misinformation! At least three people telling you to buy 1.6mm (or 1.7) for Jubilee bracelet. Unfortunately, I don't know the correct answer, but I'm pretty sure it's not 1.6/1.7. By the way, the correct size for Oyster is 1.7 and Juantxo is right, the 1.7 mm driver pictured above is the next best thing to the Rolex 2100, in my experience. I just picked one up and it fits tons better than the 1.6 mm Horotec I had been using. Highly recommended.

2 November 2016, 05:18 AM	#11
tifosi "TRF" Member Join Date: Feb 2009 Real Name: Russ Location: Southern NJ Posts: 5,760	Come to think of it....what screwdriver gets used on the 1.3mm screws. I only see 1.2 and 1.4 on offer from Horotec and Bergeon. __________________ Russ

2 November 2016, 06:27 AM	#12
fania123 "TRF" Member Join Date: Sep 2008 Location: PHILA Posts: 1,725	Not sure of the size but be sure it's a slotted screw driver and you'll be in business. Paid about $6.00 for this set from lowes and have sized 36-44mm Rolex's with no issues . Attached Images

4 November 2016, 03:14 PM	#13
Uclaman "TRF" Member Join Date: Sep 2016 Location: California Posts: 134	Does anyone know?

4 November 2016, 03:43 PM	#14
rollee1 "TRF" Member Join Date: Jan 2015 Real Name: Rollee Location: Boston Watch: it watching me Posts: 1,945	62510 uses 110 blade, thinner than ones on 78790 93150/93250. I learned something new, thanks. __________________ Time you enjoy wasting was not wasted

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode