ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

JJ Irani · 1 August 2006, 05:34 PM

Lucky lugs, I call them!!

clogz · 1 August 2006, 07:29 PM

I bet those lugs has 50hp each

Prince · 1 August 2006, 07:46 PM

Always great photos of your Rollies, JJ.

mike · 1 August 2006, 08:51 PM

Great pics JJ.

C.J. · 1 August 2006, 10:24 PM

Very nice, JJ

Good job

Launch Mini · 2 August 2006, 12:28 AM

More great pics JJ.

colemanitis · 2 August 2006, 12:42 AM

The Yammy cleaned up nicely, JJ! Great pics!

JJ Irani · 2 August 2006, 04:27 AM

Quote:

Originally Posted by colemanitis

The Yammy cleaned up nicely, JJ! Great pics!

Thanks, guys, but you can still see a few scratches on the Yammy bezel in its first picture. Should have them buffed out at Mansor's.

dman · 2 August 2006, 02:24 PM

JJ, nice pics pal!

But how did you get that big scratch on the sub?

JJ Irani · 2 August 2006, 06:25 PM

Quote:

Originally Posted by dman

JJ, nice pics pal!

But how did you get that big scratch on the sub?

What scratch you talkin' about, Daren?

dman · 2 August 2006, 08:16 PM

Quote:

Originally Posted by JJ Irani

What scratch you talkin' about, Daren?

No scratch, just pulling your chain.

2 August 2006, 10:31 PM

Hey JJ, great pix, but in one pic the crown on the YM is at quite a different angle as in another. What's with that? Did the fake tube threads give a bit?

Rockrolex · 2 August 2006, 10:41 PM

And did you notice that the crown on the Sub is upside down?

Further proof that these things are

FAKE

JJ Irani · 3 August 2006, 04:48 AM

Quote:

Originally Posted by Atomic

Hey JJ, great pix, but in one pic the crown on the YM is at quite a different angle as in another. What's with that? Did the fake tube threads give a bit?

What must have happened was I had unscrewed the crown to take some pics of the 'O'-ring and then probably did not screw it in all the way.

I normally avoid putting on too much torque once the crown is screwed in....should be just enough for the crown to stop and sit snug around the threads. Too much pressure tends to squash the little gasket inside the crown when it gets pressed against the upper rim of the stem.

JJ

3 August 2006, 05:39 AM

Quote:

Originally Posted by JJ Irani

What must have happened was I had unscrewed the crown to take some pics of the 'O'-ring and then probably did not screw it in all the way.

I normally avoid putting on too much torque once the crown is screwed in....should be just enough for the crown to stop and sit snug around the threads. Too much pressure tends to squash the little gasket inside the crown when it gets pressed against the upper rim of the stem.

JJ

That's funny that your Rolex needs to be threaded in, to be water proof.

My Panerai is waterproof to 300m and doens't need to be threaded in a all.

JJ Irani · 3 August 2006, 05:29 PM

Quote:

Originally Posted by Atomic

That's funny that your Rolex needs to be threaded in, to be water proof.

My Panerai is waterproof to 300m and doens't need to be threaded in a all.

And if you recall, you tosser, your Exp-II went swimming with you with its crown wide open - NOTHING HAPPENED!!

3 August 2006, 10:30 PM

Quote:

Originally Posted by JJ Irani

And if you recall, you tosser, your Exp-II went swimming with you with its crown wide open - NOTHING HAPPENED!!

Nothing that I've reported... I also havent had it on my wrist for a couple of months too....

JJ Irani · 4 August 2006, 04:32 AM

Quote:

Originally Posted by Atomic

Nothing that I've reported... I also havent had it on my wrist for a couple of months too....

Actually I was referring to the fact that the Exp-II remained water resistant underwater in spite of the crown being left unscrewed.

4 August 2006, 04:59 AM

Quote:

Originally Posted by JJ Irani

Actually I was referring to the fact that the Exp-II remained water resistant underwater in spite of the crown being left unscrewed.

I know... but what I'm saying is that since I haven't used it in two months, who's to say it still works?

dman · 4 August 2006, 01:19 PM

But seriously JJ, about that scratch??

C.J. · 4 August 2006, 01:26 PM

Tell them, JJ. Your watches are not fakes

They're replicas

dman · 4 August 2006, 01:29 PM

Quote:

Originally Posted by C.J.

Tell them, JJ. Your watches are not fakes

They're replicas

But look at that huge scratch on his sub.

C.J. · 4 August 2006, 01:49 PM

Quote:

Originally Posted by dman

But look at that huge scratch on his sub.

That's a scratch?

I thought it was custom work for a place to store spare change

JJ, that thing is huge, pal. You better have that looked at

dman · 4 August 2006, 02:00 PM

Quote:

Originally Posted by C.J.

That's a scratch?

I thought it was custom work for a place to store spare change

JJ, that thing is huge, pal. You better have that looked at

Probably just send it off to the RSC and let them replace the case.

C.J. · 4 August 2006, 02:10 PM

Quote:

Originally Posted by dman

Probably just send it off to the RSC and let them replace the case.

I didn't think they worked on folex

dman · 4 August 2006, 02:13 PM

Quote:

Originally Posted by C.J.

I didn't think they worked on folex

What are you talking about mate? I meant the

R eplica
S ervice
C enter

C.J. · 4 August 2006, 02:17 PM

Quote:

Originally Posted by dman

What are you talking about mate? I meant the

R eplica
S ervice
C enter

That was cleeeeeeeeeeeeeeeeeeeean

dman · 4 August 2006, 02:19 PM

Quote:

Originally Posted by C.J.

That was cleeeeeeeeeeeeeeeeeeeean

JJ Irani · 4 August 2006, 04:18 PM

The two of you are COMPLETE tossers!!

4 August 2006, 10:28 PM

Quote:

Originally Posted by JJ Irani

The two of you are COMPLETE tossers!!

Better than being an incomplete tosser, I would guess.

1 August 2006, 05:34 PM	#1
JJ Irani Fondly Remembered Join Date: May 2005 Real Name: JJ Location: Auckland, NZ Watch: ALL SOLD!! Posts: 74,319	I feel kinda "luggy" today, guys !! Lucky lugs, I call them!! __________________ Words fail me in expressing my utmost thanks to ALL of you for this wonderful support during my hour of need!! I firmly believe that my time on planet earth is NOT yet up!! I shall fight this to the very end.......and WIN!!

1 August 2006, 07:46 PM	#3
Prince "TRF" Member Join Date: Feb 2006 Real Name: Allan Location: St. Augustine, FL Watch: Daytona/Sub/GMT/DJ Posts: 20,323	Always great photos of your Rollies, JJ. __________________ Member: Rolex Keeper's Society "You see, you can't please everyone, so you got to please yourself." - Rick Nelson

1 August 2006, 10:24 PM	#5
C.J. "TRF" Member Join Date: Jan 2006 Location: * Posts: 10,196	Very nice, JJ Good job __________________ Me? I'm still looking for Kokomo. I just hope that damn golfer isn't there

2 August 2006, 12:28 AM	#6
Launch Mini "TRF" Member Join Date: Jan 2006 Real Name: John Location: Canada, eh Watch: can I? Posts: 6,240	More great pics JJ. __________________ Something witty to go here. Member # 293

2 August 2006, 12:42 AM	#7
colemanitis "TRF" Member Join Date: Apr 2006 Real Name: Jeff Location: Florida Watch: PAM 1090 Posts: 3,723	The Yammy cleaned up nicely, JJ! Great pics! __________________ Member #471

1 August 2006, 07:29 PM	#2
clogz "TRF" Member Join Date: Jun 2006 Location: Helsinki Posts: 85	I bet those lugs has 50hp each

1 August 2006, 08:51 PM	#4
mike "TRF" Member Join Date: Jul 2005 Posts: 22,683	Great pics JJ.

2 August 2006, 02:24 PM	#9
dman Lifetime TRF Patron Join Date: May 2005 Real Name: Daren Location: Austin Watch: the road Posts: 13,585	JJ, nice pics pal! But how did you get that big scratch on the sub? __________________ You either get it or you don't, if you have to ask, YOU DON'T!! I really hope that midget cop doesn't find me in Kokomo.

2 August 2006, 10:31 PM	#12
Atomic Guest Posts: n/a	Hey JJ, great pix, but in one pic the crown on the YM is at quite a different angle as in another. What's with that? Did the fake tube threads give a bit?

2 August 2006, 10:41 PM	#13
Rockrolex TRF Moderator & 2024 SubLV41 Patron Join Date: May 2005 Real Name: God Location: Washington, D.C. Watch: What do you think? Posts: 37,967	And did you notice that the crown on the Sub is upside down? Further proof that these things are FAKE __________________ Despite the high cost of living, it's still very popular. *Tosser Cabinet Member* Official Member: 'Perpetual 30' Vegas International GTG 2016 Official Member "WIS-CON" Las Vegas International GTG 2017 Official Member "WIS-CON" Las Vegas International GTG 2018 Official Member "WIS-CON" Las Vegas International GTG 2019

4 August 2006, 01:19 PM	#20
dman Lifetime TRF Patron Join Date: May 2005 Real Name: Daren Location: Austin Watch: the road Posts: 13,585	But seriously JJ, about that scratch?? __________________ You either get it or you don't, if you have to ask, YOU DON'T!! I really hope that midget cop doesn't find me in Kokomo.

4 August 2006, 01:26 PM	#21
C.J. "TRF" Member Join Date: Jan 2006 Location: * Posts: 10,196	Tell them, JJ. Your watches are not fakes They're replicas __________________ Me? I'm still looking for Kokomo. I just hope that damn golfer isn't there

4 August 2006, 04:18 PM	#29
JJ Irani Fondly Remembered Join Date: May 2005 Real Name: JJ Location: Auckland, NZ Watch: ALL SOLD!! Posts: 74,319	The two of you are COMPLETE tossers!! __________________ Words fail me in expressing my utmost thanks to ALL of you for this wonderful support during my hour of need!! I firmly believe that my time on planet earth is NOT yet up!! I shall fight this to the very end.......and WIN!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode