ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

kingc · 18 September 2019, 07:09 AM

In the past year and a half I have purchased 5 new watches from AD’s. The first was Submariner date, Explorer, Ex 2, DJ41, and most recently OP39. The Sub, DJ and Ex2 are extremely right on accuracy. Both the Exp and OP are +5/6 secs a day and even like +2/3s few hours after I set and check their winding. I took the Exp in to the AD for service on the matter earlier this year. They had it over a month and returned it finding no issues.
I have recently purchased the OP39, and noticing the same accuracy concerns. Both watches are certainly in COSC standards but not the Rolex standard. Both watches share a similar calibre. Should I figure it’s common to the 3132, or mechanical watches in general, or is their a valid issue?
Any ideas would be appreciated.

Randy-IL

TimelessQuality · 18 September 2019, 09:51 AM

I wouldn't say it's common to the calibre 3132. I have the Explorer and it's run consistently at about +0.5spd.

If it's not within Rolex spec I don't see why they wouldn't regulate it under warranty.

Thuilln · 18 September 2019, 11:35 AM

My OP is less than 1 spd fast. Super accurate.

CalSRQ1 · 18 September 2019, 12:54 PM

My 214270 consistently runs just shy of 1.5 sec/day fast

kingc · 18 September 2019, 03:10 PM

Thanks for your experiences and suggestions. Perhaps will call one of the Rolex service hubs and inquire about specific action.

importstunna · 18 September 2019, 04:20 PM

Same. My 214270 Exp1 runs consistently about +1/day.

18 September 2019, 07:09 AM	#1
kingc "TRF" Member Join Date: Apr 2018 Real Name: Randy Location: Illinois Watch: Explorer 39mm Posts: 5	Explorer and OP39 Accuracy In the past year and a half I have purchased 5 new watches from AD’s. The first was Submariner date, Explorer, Ex 2, DJ41, and most recently OP39. The Sub, DJ and Ex2 are extremely right on accuracy. Both the Exp and OP are +5/6 secs a day and even like +2/3s few hours after I set and check their winding. I took the Exp in to the AD for service on the matter earlier this year. They had it over a month and returned it finding no issues. I have recently purchased the OP39, and noticing the same accuracy concerns. Both watches are certainly in COSC standards but not the Rolex standard. Both watches share a similar calibre. Should I figure it’s common to the 3132, or mechanical watches in general, or is their a valid issue? Any ideas would be appreciated. Randy-IL

18 September 2019, 11:35 AM	#3
Thuilln "TRF" Member Join Date: Oct 2016 Real Name: Nick Location: YUL Watch: 16570 Posts: 1,936	My OP is less than 1 spd fast. Super accurate. __________________ Nick _________________________________________ 14060M - 114200 - 114270 - 214270 - 16710BLRO - 16570 - 3570.50 - Cartier Tank Solo - Cartier Tank Française ‘Yearling’ - CWC Navy Diver

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

18 September 2019, 09:51 AM	#2
TimelessQuality "TRF" Member Join Date: Jan 2017 Location: Toronto Posts: 161	I wouldn't say it's common to the calibre 3132. I have the Explorer and it's run consistently at about +0.5spd. If it's not within Rolex spec I don't see why they wouldn't regulate it under warranty.

18 September 2019, 12:54 PM	#4
CalSRQ1 2024 SubLV41 Pledge Member Join Date: Nov 2016 Real Name: Chris Location: Florida USA Watch: 5513 Posts: 719	My 214270 consistently runs just shy of 1.5 sec/day fast

18 September 2019, 03:10 PM	#5
kingc "TRF" Member Join Date: Apr 2018 Real Name: Randy Location: Illinois Watch: Explorer 39mm Posts: 5	Thanks for your experiences and suggestions. Perhaps will call one of the Rolex service hubs and inquire about specific action.

18 September 2019, 04:20 PM	#6
importstunna "TRF" Member Join Date: Nov 2012 Location: World Watch: BLNR Posts: 855	Same. My 214270 Exp1 runs consistently about +1/day.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)