ROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEXROLEX

FeelingTheBlues · 29 September 2012, 02:11 AM

Quote:

Originally Posted by Lisa

Carl, how was your grade on the brass block? Will you get to keep it? It would be cool to have it displayed somewhere as a humble reminder of the start of your journey into becoming a master watchmaker.

Well it wasn't an exam Lisa, more of an exercise I had to make so there's no grade, I would either pass it or fail it (although it's impossible to fail it, I had to bring the block to the teacher for every side I'd file so he could see if it was straight, then I'd get to work on another one).

As for keeping it, I don't know yet but it is in one of my desk's drawers now. As I've said, I'm going to use it in another class in which I'll have to change the color of steel caps using heat (pretty much like what they do to make blue'd steel hands), those caps will then be put in this block.

ftgokie · 29 September 2012, 03:19 AM

Quote:

Originally Posted by FeelingTheBlues

Well it wasn't an exam Lisa, more of an exercise I had to make so there's no grade, I would either pass it or fail it (although it's impossible to fail it, I had to bring the block to the teacher for every side I'd file so he could see if it was straight, then I'd get to work on another one).

As for keeping it, I don't know yet but it is in one of my desk's drawers now. As I've said, I'm going to use it in another class in which I'll have to change the color of steel caps using heat (pretty much like what they do to make blue'd steel hands), those caps will then be put in this block.

Looking good Carl!

I am considering going down the road to OSUIT in Okmulgee to watchmaking school. I have always wanted to do it and I might as well try it since I am 43yrs old..if I can get the time to do it.

What watchmaking school are you going to?

Shawn

FeelingTheBlues · 29 September 2012, 04:27 AM

Quote:

Originally Posted by ftgokie

Looking good Carl!

I am considering going down the road to OSUIT in Okmulgee to watchmaking school. I have always wanted to do it and I might as well try it since I am 43yrs old..if I can get the time to do it.

What watchmaking school are you going to?

Shawn

It's a school in the province of Quebec, the only one in Canada actually.

Thank you very much for your comments!

Lisa · 29 September 2012, 05:31 AM

Quote:

Originally Posted by ftgokie

Looking good Carl!

I am considering going down the road to OSUIT in Okmulgee to watchmaking school. I have always wanted to do it and I might as well try it since I am 43yrs old..if I can get the time to do it.

What watchmaking school are you going to?

Shawn

I had no idea there was a watchmaking school at OSU! That's so cool!

Jocke · 29 September 2012, 05:38 AM

Now you looks like Tommi Iommi my friend.

In about a few year you will be the next Dan Spitz.

Congrats Carl, just keep on rocking and polishing.

Jocke · 29 September 2012, 05:39 AM

Quote:

Originally Posted by Lisa

I had no idea there was a watchmaking school at OSU! That's so cool!

Maybe it's something to thinking about? Female watchmakers have the feeling.

FeelingTheBlues · 29 September 2012, 05:44 AM

Quote:

Originally Posted by Jocke

Now you looks like Tommi Iommi my friend.

In about a few year you will be the next Dan Spitz.

Congrats Carl, just keep on rocking and polishing.

Thank you Jocke! I always wanted to look a bit more like Iommi (being a left handed isn't enough for me...

).

ftgokie · 29 September 2012, 05:58 AM

Quote:

Originally Posted by Lisa

I had no idea there was a watchmaking school at OSU! That's so cool!

Yes, The one I am talking about is at the OSU campus in Okmulgee, I think it used to be called Okmulgee Tech..I also think they have one on the main campus in Stillwater

I know Rolex sponsors the equipment at the school and also gives them something like $1mil every 5 yrs for the course..

I think it would be very interesting to go for that degree

wantonebad · 29 September 2012, 06:28 AM

That's great Carl! "wax on, wax off" keep it going Daniel-san!!!

FeelingTheBlues · 29 September 2012, 09:21 AM

Quote:

Originally Posted by wantonebad

That's great Carl! "wax on, wax off" keep it going Daniel-san!!!

Thank you Sensei!

Art 1 · 29 September 2012, 10:16 AM

FeelingTheBlues · 29 September 2012, 11:06 AM

Quote:

Originally Posted by Art 1

Art!

Lisa · 30 September 2012, 01:18 PM

Quote:

Originally Posted by ftgokie

Yes, The one I am talking about is at the OSU campus in Okmulgee, I think it used to be called Okmulgee Tech..I also think they have one on the main campus in Stillwater

I know Rolex sponsors the equipment at the school and also gives them something like $1mil every 5 yrs for the course..

I think it would be very interesting to go for that degree

Now I know what to do when the kids all leave home... but not sure my eyes could handle it.

I remember Okmulgee Tech had a very good culinary school. I went to OSU in Stillwater no doubt long before there was a watchmaking school.

ftgokie · 30 September 2012, 01:26 PM

Quote:

Originally Posted by Lisa

Now I know what to do when the kids all leave home... but not sure my eyes could handle it.

I remember Okmulgee Tech had a very good culinary school. I went to OSU in Stillwater no doubt long before there was a watchmaking school.

Yes they do have a good culinary school..I served in the Army for 15yrs and had the opportunity to go to OSU and OU among 4 other schools throughout the world where I served.

My brother in law went to Okmulgee Tech and he owns his own jewelry store here in Muskogee.

DiverAsia · 30 September 2012, 01:59 PM

Great to read how you are doing on this journey. Thanks for the update!
Cheers!

threemonkeys · 2 October 2012, 02:01 PM

Believe it or not, my Canadian friend, I was wondering about your brass block.

Congrats! Now don't lose any fingers, ok?

FeelingTheBlues · 2 October 2012, 08:59 PM

Quote:

Originally Posted by DiverAsia

Great to read how you are doing on this journey. Thanks for the update!
Cheers!

Thank you my friend!

Quote:

Originally Posted by threemonkeys

Believe it or not, my Canadian friend, I was wondering about your brass block.

Congrats! Now don't lose any fingers, ok?

Well it is doing just fine Craig, thank you!

...Can't say the same about the fingers though (as you can see), I'll do my best to keep all nine of them...

...Wait...

meloncap78 · 3 October 2012, 01:33 AM

FeelingTheBlues · 3 October 2012, 02:03 AM

Quote:

Originally Posted by meloncap78

Thank you Joshua!

Bangel · 3 October 2012, 09:18 PM

First your hand got burnt. Now your fingers are traumatised with blisters.

I always knew watchmaking required supreme dedication and perseverance, but I never realised it was literally that "painstaking" !!

Thanks for the update and I'm already looking forward to the next instalment, provided of course you're not too injured to type by then.

FeelingTheBlues · 3 October 2012, 09:29 PM

Quote:

Originally Posted by Bangel

First your hand got burnt. Now your fingers are traumatised with blisters.

I always knew watchmaking required supreme dedication and perseverance, but I never realised it was literally that "painstaking" !!

Thanks for the update and I'm already looking forward to the next instalment, provided of course you're not too injured to type by then.

Thank you Julian! Yes it can be potentially dangerous but it isn't that bad...

29 September 2012, 05:38 AM	#35
Jocke 2024 SubLV41 Pledge Member Join Date: Apr 2006 Real Name: Jocke Location: Sweden Watch: A dozen of Rolex's Posts: 22,541	Now you looks like Tommi Iommi my friend. In about a few year you will be the next Dan Spitz. Congrats Carl, just keep on rocking and polishing. __________________ This message is written in perfect swenglish. What is best a custom Rolex or a Rolex that is stuck in custom? Buy a professional camera and you´re a professional photographer, buy a flute and you own a flute.

29 September 2012, 06:28 AM	#39
wantonebad 2024 SubLV41 Pledge Member Join Date: Nov 2007 Location: USA Watch: 126600, 116500LN Posts: 12,849	That's great Carl! "wax on, wax off" keep it going Daniel-san!!! __________________ "I'm kind of a big deal... on a fairly irrelevant social media site that falsely inflates my fragile ego"

30 September 2012, 01:59 PM	#45
DiverAsia "TRF" Member Join Date: Aug 2012 Real Name: Rich Location: Taiwan Watch: 16014 16610 372 Posts: 1,044	Great to read how you are doing on this journey. Thanks for the update! Cheers! __________________ He's a rebel and a runner He's a signal turning green He's a restless young romantic Wants to run the big machine

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

29 September 2012, 10:16 AM	#41
Art 1 Banned Join Date: Feb 2008 Location: Florida, Canada Watch: Rol/Seik/Tud/Omega Posts: 30,244

2 October 2012, 02:01 PM	#46
threemonkeys "TRF" Member Join Date: Feb 2011 Real Name: Craig Location: Seattle-ish, USA Watch: GMTIIc, AK, LVc Posts: 7,022	Believe it or not, my Canadian friend, I was wondering about your brass block. Congrats! Now don't lose any fingers, ok?

3 October 2012, 01:33 AM	#48
meloncap78 "TRF" Member Join Date: Mar 2008 Real Name: Joshua Location: Syracuse, NY Watch: LV C Posts: 2,204

3 October 2012, 09:18 PM	#50
Bangel "TRF" Member Join Date: Oct 2011 Location: Australia Watch: 116610LN Posts: 15,802	First your hand got burnt. Now your fingers are traumatised with blisters. I always knew watchmaking required supreme dedication and perseverance, but I never realised it was literally that "painstaking" !! Thanks for the update and I'm already looking forward to the next instalment, provided of course you're not too injured to type by then.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)